Reviews
Quake-resistant Grip
I use the Seismic Grip on my 250cc Motorcycle and love it, so I decided to make a matching one since it was time to replace it. View detail
Best.
The design is large and the size is large. The texture is a little bit better than I expected. View detail
If you are having trouble with vibration
I used the same one last time and was so comfortable with it that I bought the exact same color again.
Compared to the NORMAL Grip, the numbness of the hands is drastically reduced.
It was my first time to exchange it, but now I can easily find how to do it with a lot of research, which is Large helpful.
Apply Grip bond to Handlebar and Axel, apply Parts cleaner and insert at once.
Because the surface is soft, it's not as durable as a regular Grip, but with the way I grip it and how I store it, it seems to last longer for me.
View detail
It's lasted three years.
The Grip surface is cracking and I thought it was time to replace it.
If you look closely, you can see that some of them were much less and slippery.
You can see how it compares to the new one.
I like the Pro grip because I can hold the Axel in the palm of my hand and it's easy to grip.
This time, I changed the color.
View detail
Thanks to the quake-resistant Gel, the push and pull of the Motorcycle feels light.
I bought a different color of the same model. I'm very happy with this product. Installation is very easy. To remove the damaged grips, blow some high pressure air and pull them out while turning round and round, then spray some parts cleaner on the GripPenetrating part and insert it into the Handlebar. I don't use grip bond so I can remove the old grip just by blowing high pressure air. The grip is good. I think I will buy a different color again when the time comes to replace it next time. View detail
soft
Used for DR250R. It is soft and I like it. Personally, I think it lasts longer than the DRC stuff. View detail
Not too dark.
I really wanted to get a dedicated Mirror Bracket Type Lens, but it's expensive and [Color] I bought this one because I thought the Smoke was too dark to use at night.
I hardly feel the difference from Clear Lens and the visibility is good. I was able to run without a problem even the road where there are few street lights at night.
It's not completely invisible like the Mirror Bracket Type, but I'm satisfied with its practicality and cost.
Parenthesis good thing is that it's a dedicated Mirror Bracket Type.
View detail
Simple and recommended
The grip is designed to be simple and easy to use, but you'll feel the difference when you replace it with a NORMAL grip. The new grip is made from a vibration resistant gel material to reduce wrist sway when touring. View detail
Peace of mind when installing the Hand guard
I installed it on my WR250R. It is very dangerous to install hand guards, especially when the Throttle side interferes with the Grip, as it can cause the Axel to not return. If you use this Grip, you can shortcut all the work and it's very useful. (I may have been a little too short ……) View detail
easy to grip
I installed it on 1YP2. The installation was done by spraying CRC556 from the gap as usual and removing the new Grip
I also sprayed a little on the inside and put it on. Even with this, it has never come off because I basically don't ride in the rain.
The previous grip was a cheap TZ type grip, so it wore out in half a year.
I replaced it because it was not good. The grip is moderate, and the operability is good.
View detail
Easy to grip, easy to use!
Impressions after 1 year (about 8000km) of use.
It doesn't feel slippery at all, and it feels comfortable in my hand with just a light grip. I use the Bar End, which is a little heavier than the OEM, but it seems to transmit less vibration to my hand than the OEM.
The Design is very good and I like the Line of Red.
However, it's only been in use for about a year and it's worn out for Large.
I'm not sure if it's because of the Habit of the grip, but I feel like I need to replace the Left Side soon.
The motorcycle shop said that the Right Side is made a little thinner and that may be the cause. The bike is made a little thinner on the Right Side, which may be the cause.
I was a little disappointed with the durability, but I was very satisfied with the design and the feel of the product.
View detail
Pay attention to the length of Grip.
I use it on my YZ125X
If you don't use the 115mm one, it will stick out from the throttle tube and you can't install it.
Also, the 120mm of #795 did not fit the inner flange of the Throttle tube, so this also needs attention! 。 This Type of 115mm will fit in Beauty. 。 The Throttle tube I'm using is a ZETA TeflonOpening.
View detail
I can hold Lever firmly.
Lever grip is a pain to install every time.
It's a common method, but I use detergent to install it.
It is Large strange to put the head part in every time, but once it is in, it is Large strong.
However, if you struggle with it too much there, it will dry out and the second half won't glide and you'll end up with a thousand pieces.
However, the grip feeling when gripping the lever is completely different between having this and not having it.
View detail
I've got Blue on my imeChain!
I used to have a F650GD with a Black Cover from TRANXAMP.
As expected, the bellows part breaks after almost 20 years, and it buys it for repair.
Satisfied with the thick Material and good color DAKAR's Fork
Small diameter is a little bit too big (not a problem since it is tightened with Tie Wrap)
I don't know if it's effective yet, but the water and air vent holes are in place.
I'm very happy with my image chain.
View detail
It's kind of expensive.
I changed the Handlebar and this one too. Blue to match the body color. View detail
Comfortable grip without Habit
I changed the Grip while I changed the Handlebar.
This Grip has a slightly oval shape on the finger side so that it fits the finger side part when you grip it.
The Pattern is fine and low, so it can be gripped in any way without Habit.
It is a little disappointing that the gray rubber part is easy to get dirty. Also, if you don't use Grip bond etc. to fix it, it may move.
The Grip is moderately soft and easy to grip, so I would use it again.
View detail
Used on S1000RR. Good feeling.
BMW Grip heater can't be replaced by GripSingle Body even if Rubber is worn out.Dealer will replace the assembly so Quantity:Pair (for Left and Right) This time, I decided to replace it by myself. This time I was ready to break it and decided to replace it by myself. What was the most Large oddity was the removal of the OEM Grip, because the heater wire is thin, I did the work carefully and Large boldly so as not to cut it. After the replacement, I was very satisfied with the Large, and I was able to save my grip strength for touring. I should have replaced it earlier because it also has an effect on vibration. View detail
Required when washing the car
I need it to wash my car when I get home because when I wash it in the car wash, water gets in! A friend of mine saw his engine not start for a while because of water in it, and it's not that expensive. If you forget it when you start the engine, it will fly away. View detail
The numbness in my hands has decreased dramatically.
I switched from OEM to this and my hand fatigue went way down. I was going to try this again, but the only one in stock anymore is Black … View detail
It is a good item
I bought the same one before and installed it on my main motorcycle and it was so good that I installed it on my sub-motorcycle, APE.
My APE Grip was less than $1000, and without the thickness of the rubber, the vibration was transmitted directly to my hand, and I had to fight against numbness.
Since I've been using this Grip, the vibration has been reduced and my hands are no longer numb.
It comes in a variety of colors and fits a variety of car models.
View detail