Reviews
completely pontoon-mounted
I chose this Lever because I hang two Brakes and I wanted to be a bit stylish. It is a complete bolt-on, and there are no OEMParts to use with it. Just pull out the bolt on the shaft and replace it.
I am satisfied with it as dress-up parts, although the actual effect may not be so great.
View detail
Red.
It is used for HORNET600.
Because the body is red and the engine is black, I chose red as one point.
The color is Anodized and is beautiful.
It doesn't look like this is the Guard, so it's less assertive and casual.
View detail
Overpriced, but acceptable quality.
I'm using ZETA's short lever.
I was looking for something shorter and came across this product.
The Handlebar is also made by LSL and
There are high quality PartsManufacturer Images
I bought it as soon as possible because it was a new product.
LeverBody and Adjuster are unified in Black
BlackoutSpec.
2 bottlesQuantity as it was not specifically mentioned at the time of purchase:I thought it was a set.
I was surprised when I received one bottle.
It's hard to tell from the pictures. Can we cut the meat off here? This is a good design with no complaints.
It's almost twice the price of the ZETA product, but when you install it, there's no wobble at all.
In terms of quality, it's definitely a head turner.
It's an angular design, so it's a matter of taste.
I think the grip is excellent.
The thicker grip makes it easier to put pressure on the short lever.
It's the equivalent of the 3Finger in Lever for Off-Road, so
It is shorter than the average short lever.
Also, I heard that it has passed the ABE standard.
I wasn't able to find out if there were any provisions for strength standards.
In the event of a change in plant equipment or a change in plant representatives
required to report, and failure to do so would result in the withdrawal of the standard.
It seems to be an unnecessarily strict standard.
2 bottlesQuantity:It was a miscalculation that it wasn't Set.
I liked it so much that I rushed to order the Brake lever side as well.
You'll have to buy One Side at a time, so you'll have to open it up.
Quantity:Pair (for Left and Right) and change the color of the Adjuster in
I think it's possible to make it one point.
It's not something I would recommend to everyone.
This is recommended for the discerning rider who does not feel comfortable with ZETA or Kanaya.
View detail
Fits: BMW S1000XR, BMW F900R, BMW F900XR, BMW R nine T, BMW F850GS, BMW F750GS, BMW R nine T Pure, BMW R nine T Racer, BMW R nine T Scrambler, BMW R nine T Urban GS
I'm satisfied.
Replaced Lever after a fall at RidingSchool, bought it because it was available earlier than the OEM Product. Installation was fine and the texture is more upscale than the OEM product I feel. I was worried when I saw on social media about the external Brake lever Troubles, but so far no Troubles. the OEM arrived but I will keep it for the Troubles and use this Lever. View detail
Good feeling ♪
I am wearing BANDIT 1250 SF.
Because it has a heavy weight Motorcycle so I put on the meaning of insurance and I am wearing it from car delivery.
I liked the shape the most compared to those of other companies.
I can choose the color of the installation Pad and I think that it is convenient because only Pad can be changed ♪
I think that it is also high with weight and solid texture.
However, since I think that it is Engine Guard's side rather than protecting all of Cowl, those who seek defense may need to use it in combination with other things.
It became a good point of my car ♪
I will just try not to take care of me (Lol)
View detail
[Webike Monitor] A fall is purchased as look before you leap on the Motorcycle for an accessory. Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing. It is a black plastic part to co
[Webike Monitor] A fall is purchased as look before you leap on the
Motorcycle for an accessory.
Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing.
It is a black plastic part to contact a ground surface at the time of a fall.
Unlike a SLIDER50 besides
, since the plastic part is small, impact-absorbing power may be weak, but color play can be performed.
Although safely united with the color of the Frame this time ...
I think that it is a big charm that color play can be performed if it is the purpose with which emergency is equipped by a Street youth at any rate if the
fall is a premised Race use.
View detail
FZS1000 is equipped. The Stay for Crash-pad wearing of the Manufacturer. It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged. When exchanging every [ single-sided ], there was also no special tool and it was e
FZS1000 is equipped.
The Stay for Crash-pad wearing of the Manufacturer.
It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged.
When exchanging every [ single-sided ], there was also no special tool and it was exchangeable.
After
wearing, although it had fallen, the car body was guarded firmly and the Frame Engine was safe.
View detail
It chose by the low price of appearance and a price. Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose. Since it has not actually fallen, the degree of an e
It chose by the low price of appearance and a price.
Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose.
Since it has not actually fallen, the degree of an effect is not understood, but the damage by light fall is likely to be mitigable.
View detail
Since it attached by bolt on even if it did not process it into a cowl, it opted for purchase. It has attached in about 30 minutes. Since mounting was short anxious about die length at the time of a fall, another thing was merely attached. An
Since it attached by bolt on even if it did not process it into a cowl, it opted for purchase.
It has attached in about 30 minutes.
Since mounting was short anxious about die length at the time of a fall, another thing was merely attached.
An attachment bolt. Pains were taken to search by M10 and P= 1.25.
View detail
Fits: YAMAHA FAZER8, YAMAHA FZ1 (RN16), YAMAHA FZ8, YAMAHA fz1 fazer(rn17n) [feather].
LSL liked the design and had also equipped with the crash pat of LSL the motorcycle which had ridden before. And a pat part will use after a change as it is, and it purchases only a mounting kit. An attachment part removes the bolt of the frame wh
LSL liked the design and had also equipped with the crash pat of LSL the motorcycle which had ridden before.
And a pat part will use after a change as it is, and it purchases only a mounting kit.
An attachment part removes the bolt of the frame which is fixing the engine, and attaches it there.
Since it has not fallen, the degree of an effect is not actually understood, but it stands, and if it is a GOKE grade, I feel that it is likely to stop at worst for the damage to a cowl etc.
But since it can be made the mounting [ itself ] thinness, there is no telling whether it can deal with a how far strong impact, and I feel that its frame is hurt depending on the method of a fall.
I think that it is better whether to attach and carry out by Kami who was ready for the neighborhood.
View detail
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase. First, appearance is also comfortable and completely matches the motorcycle. Si
Since it was Rider short in stature, since it was a very big car body for me, GSR400 left and I attached it together supposing GOKE at the time of motorcycle purchase.
First, appearance is also comfortable and completely matches the motorcycle.
Since I putted together with the body color, I am seldom conspicuous, either and pleased.
Since the motorcycle has been toppled about the engine performance recently, that time is reported.
When said at a word, I attached and thought the correct answer.
By the favor of this, a conspicuous big wound etc. go into neither an engine cover nor a car body, but I appreciate this product.
It is better to attach the direction which is wavering purchase, before pushing down since a wound etc. will consider being attached by them to a cover etc. if a car body is probably pushed down in the case of GSR.
I think that it is worth attaching if the amount of money can also come.
View detail