Reviews
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
Difficult to apply neatly, but highly effective.
Non-glare film was used because daylight on the meter obscures the LED display. The film is highly effective and ensures visibility of the meter except when it is exposed to strong direct sunlight. However, due to the Film, the LED display looks a little dim.
Also, as mentioned in the Impression by others, film application is difficult. The difficult part is positioning the film and removing air bubbles. If you fail to do this properly and repeatedly reapply the film, it will lose its adhesiveness and peel off easily.
The first time I used this product was about 2 years ago, and although I reapplied it several times, it was slightly tilted against the meter panel and left several air bubbles, which was a compromise. Still, it has not peeled off after more than 2 years of use.
We decided to use this Film on our new vehicle. Basically, I followed the Instruction Manual (English Version only) that came with the product.
In this case, I used Mending Tape vertically on the right edge of the meter panel as a guide to position the film. After peeling off the protective film, lift up the film attached to the panel from the Left edge (do not peel off the entire film, as this will leave air bubbles). Then, I applied it again from the Right Side while pressing it with my finger to remove air bubbles, and was able to make it quite satisfactory. The spatula attached to the product is difficult to use.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Quantity:It comes in two sets...
Shortly after I bought my new car, I looked into various anti-scratch seals for the meter, but I was not satisfied with the results.
In the end, I decided that a dedicated product was the best choice, and although I hesitated because I thought it was rather expensive, I took the plunge and bought it.
[Contents] Is Quantity:It includes two sets of instructions and a translation of the pasting procedure (please type in the translation here).
I'm not very good at precision work, and I often make mistakes with the protective seals on my phone, so I tried to do better this time, but... I still failed because of the Dust in between (tears).
Later, I realized that there was a Seal for Dust removal, but it was already too late, and I had another Quantity:I'm going to try to Challenge at a later date with Set.
I'm currently using Antiglare, but to be honest, I don't find it very easy to read...
I'm looking forward to Super clear.
View detail
Fits: TRIUMPH Thruxton, TRIUMPH Street Cup, TRIUMPH Speed Twin 1200, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T120
Pear
I put it on my '19 SpeedTWIN.
The surface of the meter is curved, so it may be a little difficult to work with.
You can position it by lightly misting it with soapy water, and then use a dryer to lightly warm it up and remove the air.
It comes with a spare so you don't have to worry if it gets damaged.
View detail
practicality
I'm sure it will look bad, but it is practical. I don't have a photo of it as I don't have a vehicle at hand, but it has reduced the amount of mud splashing from stepping stones. I asked a motorcycle shop to fix the Rivet so I didn't have to worry about it falling off. If you are looking for something practical, this is the Recommendation. View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
slightly elevated
Instruction Manual is also available for easy application.
If you've ever put a Cover on your phone...
I don't even need the Instruction Manual!
The size is exclusive and perfect.
I thought the price would be a little lower.
Recommendation for dedicated and easy installation.
If you are dexterous enough, you can make it by yourself.
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
CB250R.
I tried to put Antiglare first, but Meter looked blurry, so I put Super clear again.
I wasn't even sure how it worked as Antiglare.
Super clear is so beautiful that you don't feel the existence of film if you put it well.
But, because I failed a little, I used the remaining film after removing this film as a mount for Size:I think I'll try to use Free's smartphone Film with Cut.
View detail
Fits: Others
Easy
I was worried at first whether I could connect it well, but I was able to use it without a problem by inserting it firmly to the back. waterproof is a little uneasy, but the lid is also more solid than I thought, and it seems to be no problem as long as I do not use it in the rain. View detail
Fits: YAMAHA MT-09SP, YAMAHA MT-09
Buy as soon as possible.
I think that it is good to buy and stick it early because it is the part where the abrasion is inevitably attached, but the abrasion which was originally attached when I stuck this product became not so conspicuous, and I am satisfied.
Two SheetsQuantity:It is Set, but since I put the Clear one, AntiColor:Sorry, I don't have an assessment of what Gray is like.
When the scratches on the Clear side become noticeable, AntiColor:I would like to try Gray as well.
Two SheetsQuantity:I think the price is a bit high for Set.
View detail
Fits: DUCATI Panigale 959, DUCATI Panigale 899, DUCATI Panigale 1299, DUCATI Panigale 1199
For dirt and scratch prevention
It is not difficult because it is the same procedure as the film that sticks to the Smartphone, but when sticking it, the Screen hit the hand and was Large strange.
I don't have to worry about scratches when I put gloves on it.
View detail
Peitzmeier Company Extender Fender
There was a lot of bouncing off the front wheels when it was raining or there was water on the road, but after installing the Extender Fender I was pleased with the effect. It is best to remove the OEM Fender when installing it. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Stepped areas cannot be protected.
The 21model MT-09 Meter has a step, so this film is also divided into 3 parts. This is the reason why this film is divided into 3 parts. It can't protect the bumps, but it can protect most of the area. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Effective in preventing mud splashes
I installed this on my NC750X 2021.
I installed it because the Fender is too short for OEM and it makes the car body dirty.
It is recommended to fix it with Double-sided Tape and Pin, but since the quality of the Double-sided Tape that was included seemed to be good, I installed it only with Double-sided Tape.
I've driven about 500km and there's no sign of it coming off.
View detail
Fits: HONDA CB300R, HONDA CB125R, HONDA CB250R
CRF250L.
Installed on New ModelCRF250L.
I bought it because I thought it used the same Meter, but the shape was a little different, so the Meter is exposed in the hollow part of the lower side.
I think I'm just clumsy, but I couldn't stretch it well because of the air bubbles.
I will buy it again when the one for CRF250L is released.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
Front mudguard extension
My car is made by Honda, the model is NC750X, and the year is October 2020. I bought P&A’s front fender on webike. Its material is plastic; I don’t know why the original car’s front fender is so short? When installing this extension plate, the front fender of the original car must be removed and fixed with 3M glue. It is best to use 3 or 4 rivets to fix it. It is still not possible to ride too fast, otherwise the radiator plate of the water tank will still be thrown. . ---------------------------------------------- My car is Honda brand, model is NC750X, the year is October 2020. I buy on webike the front fender of goods P & A, and its material is plastic; do not know why the original car's front fender so short? When installing the front fender panels should extend the original car demolished, fixed with 3M adhesive, preferably with three or four rivets fixed, or can not ride too fast, otherwise it will still dump tank cooling plate. Powered by Google Translator View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR700, YAMAHA XSR700
It's like the old smartphone Film.
[How is it used?
I bought this for my new car to protect the Meter from scratches.
Was the one you received as per Image?
It was a little smaller than the Image.
The meter is not able to cover all of the large objects.
Was the installation difficult?
It's easy, but you need to prepare Spray for watering.
You may be able to do it with the normal way of pasting if you try hard enough, but to avoid shifting, you need to apply water.
How was your experience with it?
I'm worried that there are a few areas that I can't Cover.
[Included Parts:were they on?
It did not come with Squeegee, Cleaner, etc.
I don't know if it's a packaging leak or a spec. change, but I dealt with it on hand.
[Was there anything that disappointed you?
Included Parts:Was it leaking?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If it is floating, press it with cellophane tape and leave it for a day.
View detail
Extender Fender Installation on 2020 Grom
I installed it on the Grom.
The Size of the extension is also just about right, which is nice.
The reason I wanted to install this is that the NORMAL Fender is short
Even the top side of the cylinder head has mud splatter and is very dirty and difficult to clean!
For installation, remove the Fender and fix with Double-sided Tape and PlasticHook.
You will have to drill the Hook holes yourself.
After installation, there is mud splash on the bottom of cylinder but not on the top of head.
It's gone.
View detail
Fits: TRIUMPH Street Triple 765S, TRIUMPH Street Triple 765RS , TRIUMPH Street Triple 765 , TRIUMPH Street Triple 765R , TRIUMPH Speed Triple 1050RS, TRIUMPH Speed Triple 1050S
Less dirt.
After purchasing the Rear Extend Fender for the dirt around the R suspension, the Front was purchased because....
3mm (I think it was 4mm?) The structure which makes a hole with the Drill of the "Mere Old Man" and fastens it with the attached Screw.
As a side note, I think you can use glue instead of Screw, as Rear's Extend Fender is attached with only glue.
Now, the dirt of the middle part of Radiator was unknown because it was already Level that could not be removed at the time of purchase.
However, the dirt of the Radiator and the exhaust pipe located under the Radiator was obviously reduced.
In addition, when running on a circuit, the Tire refuse picked up by the warmed-up Tire "Boom, boom, boom. Because the tire refuse should have hit the Radiator as it was when this product was not, it might be good from the viewpoint of the protection.
Also, as a demerit that I didn't know before I bought it, the clearance between the Tire and the Tire is too narrow to wrap the Tire warmer.
It's not impossible to force the Warmer around, but I don't want the Tire warmer to get scratched, so I had to remove the FFender before I wrapped the Warmer around it when I was driving on the Circuit, and after I removed the Warmer, I had to install the FFender, which took about 2 minutes more.
This would be a Demerit that does not occur in some car models.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
[Color] Clear is a Recommendation!
I bought it as a meter protection film for my Z900RS
[Color] Clear and Antiglare, a Smoked film, are in it.
by nature [Color] I wanted to use Clear, so I practiced with Antiglare at first.
I didn't intend to use Antiglare, but it was far too dark and visibility was lower than I imagined.
Because it is almost Exactly Size for the round meter, it is also Large strange to peel off.
the real deal. [Color] Clear, but I was able to apply it well, being careful of the air bubbles.
It was so clear that you couldn't tell that it was pasted, and it was just as super clear as you'd expect.
I was Large happy with this, but...
One day, about a year later, the protective film became WrinkleWrinkle...
Perhaps I wiped it down with Dustcloth with Plexus on it.
It was very awkward and I ended up stripping it off.
It wasn't a bad product, as long as you were careful not to wipe it with Chemical.
View detail
Fits: SUZUKI SV650, SUZUKI GSX-S750, SUZUKI GSX-S1000
Immediately after installation, no problem.
It's been installed for almost a year now.
Immediately after installation. [Color] With Smoke on, the light reflection from Meter was gone and I was very happy with it.
But,
About three months? Maybe it's because I installed it badly, but the middle of it floats away.
View detail
I'm comfortable with it.
Radiator guard is less and more expensive, so I chose it instead
No Gap or blur when glued together with just 3M Seal
However, it is preferable to have an environment where drilling is possible because it is recommended to use a Rivet Clamp.
View detail