Reviews
Front rigidity of JC75 is increased.
Installation is easy
Front rigidity is increased and breaking is stabilized.
It looks good.
It is also good that it is different from the OEM Front fork Gold.
View detail
It was easy to install.
690smcr (21 years) attached to the
The work was very easy and the Instruction Manual was included in case of any problems.
In the case of the 690, the OEM Knuckle guard is attached, so if you remove it, the clutch lever will also come off, so if you have a separate m6 nut, you can fix it.
Vibration absorption effect, but there is no overt reduction in vibration.
I was wondering if it was less than before it was installed.
I was more satisfied with the visual coolness of the product.
View detail
Fits: FANTIC Fanatic Caballero Rally 500, ROYAL ENFIELD Interceptor 650, ROYAL ENFIELD Continental GT650, その他
No problem the first time if carefully installed.
Used to make SR400's Rear wheel tubeless.
We installed it not only to reduce weight, but also because we originally had Tire on Tubeless Casting wheel and to eliminate the anxiety of puncture on the road.
The subject of the installation was an SR400 hub with EXCEL's AluminumWide Rim.
The size is 18×MT3.5J. I have the impression that MTRim was not as difficult as I thought it would be, probably because the surface that Nipple sticks to is the back.
I think it was a good thing that it was a new rim, but even so, I smoothed the mating surfaces of the rim with water-resistance paper just in case.
I think a used OEMRim or H-type Rim would increase the difficulty.
Due to the nature of the product, re-installation is quite Large strange, so at least a new Spoke seems like a good idea.
Also, if the RimCenter is narrow, such as almost only the width of the Nipple, the difficulty seems to increase even more.
This was my first installation, but I worked carefully anyway, even if it took some time.
Not included in the kit but necessary are water-resistance paper for leveling the rim joint surfaces and a strong parts cleaner for degreasing.
I was lent WAKOS Parts cleaner by a colleague of mine, as it is said to have a different cleaning power.
It was supposed to be a new rim, but Dustcloth was very dirty, so I thought it was definitely a necessary process.
After installation, the tires were immediately assembled and left at high air pressure.
2.The manual said 5 kilos, but I put in 3.0 kilos because I usually have a habit of setting the Tire higher right after it is built in.
Check two days later and it is still a Large success.
Overall, it is not difficult, but it is depressing that I have to install it on the Front from now on because it was quite Large strange lol.
(even more so since Front is 2.5J)
View detail
Stability Up
After test driving straight ahead and in the corner, the straight ahead stability and the handlebar shake was reduced, and the car feels stable even at 80 km/h.
Installation is also done with the car's Jack under the Engine.:Set and worked on it, but it is easy to work with.
Color and Bolt1 pc and WasherQuantity on top:1pc., color and BoltQuantity below:All you need to do is install 2pcs and 2 washers.
View detail
Fits: HONDA , HONDA , HONDA CRF250L, HONDA the rest, HUSQVARNA TE450, HUSQVARNA the rest, KAWASAKI supersherpa, KAWASAKI the rest, SUZUKI DR-Z400S, SUZUKI the rest, YAMAHA , YAMAHA , YAMAHA WR250R, YAMAHA the rest
Perfect Item As Advertised
Ordered on 26 March 2023, shipped on 27 March 2023. Arrives Brunei on 31 March 2023 by DHL. Took 5 days to arrives. This item will be used to tape my supermoto wheel on CRF250L 2014. View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
It can be easily made Tubeless!
Once you get the gist of it, you can easily make it Tubeless with ease.
Videos are also available on YouTube, so if you watch them while installing, the hurdle will be lowered.
The durability is also quite good, and after two years of installation, there is still no excessive air loss.
But the price is high.
It would be better if it were cheaper.
View detail
Fits: HONDA , HONDA CRF1000L Africa Twin, KTM 950 ADV, KTM 990ADV, TRIUMPH NEW Tiger 800XC, その他
Honda africa twin
The product is good quality,easy to repair and handle. The kit is complete ready to use. Safety is number one. What it felt like driving from tube to tubeless. I feel lighter. I think it... View detail
Fits: KTM 950SUPERMOTO, KTM 990ADVENTURE, KTM 990SUPER DUKE R, KTM 990SUPER DUKE, KTM 990 SUPERMOTO, KTM 690SUPERMOTO, KTM 690SMC R, KTM 690SMC, KTM 690DUKE, KTM 690ENDURO, KTM 200DUKE, KTM 390DUKE
I saw that it was for car models only.
You can't use it, so all you can do is complain! With rising prices, Cup noodles are also increasing in price.
What a waste! I'm going to eat an ear of bread for a while!
View detail
You can feel the rigidity increase!
Purchased a Honda Grom (JC92 new car) in June 2022.
I was concerned about the lightness and unstable movement of the Handlebar at high speeds, so I purchased this product.
The installation method was to fix the for VehicleJack under the Engine, and carefully to prevent the Stem from lowering.
Material because Rust is also a concern for Screws.:Replaced with Stainless Steel.
Here we go! First run!
I could feel the stiffness of the front suspension right from the start, and I was impressed that the handlebar was calm even when the road surface was uneven.
I was skeptical, but it was the right decision to purchase Large.
I am looking forward to Touring in the future.
View detail
Stem Stabilizer installed
I bought it as soon as I saw that MotoBlogger had installed it.
I had to wait a bit for the Red2 to match the color of my DAX125.
If you have waited long enough.
The cut-out aluminum parts add to the sense of ownership, and the installation instruction manual was translated (just type it in here), so it was easy to install!
ThailandHondaQuality so it takes a little bit of force to loosen Bolt.
Note only that tightening with the same force that loosened it will result in Overtorque.
It is fun to drive because you can trace the line you are aiming for when turning a corner.
Before installation, I had to be careful not to cut the handlebar too much, but now that the shock has been stiffened up, I feel that the original performance has been fully realized.
It is a recommendation because the performance is better than the price.
View detail
Dress-up and Rigidity Up
Installation is easy
Simply tighten to match the specified Torque.
The workmanship is very careful and beautifully finished.
It is also a hidden dress-up, killing two birds with one stone.
View detail
Fits: HONDA glom, HONDA MONKEY125
Appearance Up
Vibrations are much less than before installation.
It is also a dress-up, so it is a recommendation.
View detail
![[Optional Parts] Vibration Absorbing Lever Guard for VALG-Z Hand Protector ZA](https://img.webike-cdn.net/catalogue/images/103244/image012_TS.jpg)
It is easy to install.
Small and stylish, it is less windproof. However, it is good because it is somewhat effective. View detail
Let's mute it.
I used it for sound deadening purposes on my vfr750r Lady Bird 4in2in1. The length is 3cm longer and needs to be Cut. The thickness is 45 pi, which is just right. The catalytic converter part is 38 pie, so I used stainless wool to prevent it from rattling. The effect of the sound deadening is good because it became a little quieter. I don't have a machine to measure the sound level, so I am just guessing, but it might be just 99db. The smell of the exhaust gas seems to have been reduced by about half, so I think the purification performance is quite good. View detail
Lever Guard Installation
At first? but after reading the instruction manual for 5 minutes, I could understand it.
Holding a constant RPM on the highway is quite numbing if the RPM is subtle.
This does not eliminate it, but it will be much better.
Grip should also be replaced.
But if it's a 16 year transition, you have to change the Lever or it will interfere.
View detail
Looking forward to Lever Guard and vibration reduction!
I purchased this for Handlebar vibration reduction and lever protection.
At first it was difficult to tell which product could be installed.
I was confused, but in the case of Grom, the OEMHandlebar
Lever Guard is a special type of bolt that is inserted into the handlebar.
If you are using a different handlebar, you need to select and purchase a locking spacer of the correct size for the inner diameter of the handlebar. You can choose the thickness and shape of the lever guard except for exclusive products.
I purchased the 8mm thick one. Installation was easy.
The instruction manual was also good and easy to understand.
If there is interference, there is a Spacer made by the company that can be used.
Adjustments.
View detail
![[Optional Parts] Lever Guard Spacer](https://img.webike-cdn.net/catalogue/images/21889/spacer1_TS.jpg)
For LeverSpace adjustment
Brake and clutch lever are inside the bar end.
OUTEXLever Guard is not a problem if you have
It will be attached directly to the Handlebar End, so it will be attached to the Bar End a little bit.
I wish there was a color setting since the Spacer is Silver on the ground.
View detail
Used for CB1100EX
Tubeless front and rear wheels when the vehicle is purchased
After all, Puncture repair is easy.
This time, the rear wheel Spoke was reupholstered, so I bought it along with the new Spoke.
I could have done it myself if I was calm and did it properly and carefully.
The front wheels have been driven more than 40,000 km and have no problems.
Six Spokes were broken on the rear wheel and air leakage occurred as expected!
View detail
Straight-line stabilityOutclassing
I knew about this Stem Stabilizer from watching youtube, but does it really work? Also, it looks
It looked a bit lumpy and I wondered about the overall balance.
Also, the Rear suspension was replaced with NITRONR1 and the balance between front and rear was poor. I considered replacing the FrontCB400T Spring and Oil, but gave up because of the high hurdle of the replacement work.
So I remembered this product and decided to buy it.
The work can be done without any problem if you have a Torque wrench.
Black is recommended.
Merit
Good straight line stability, so it is not scary to speed out of the car.
Conner is also stable.
The ride is comfortable.
It is not as large as in the photo, and is surprisingly well matched to the car body.
The effect is commensurate with the price.
Demerit
Nothing in particular, but if I had to say, it picks up a little vibration, but not enough to bother me, so it's not a problem.
View detail
Wobble Phenomenon Countermeasures
I purchased this product to prevent the wobble phenomenon when driving at high speeds as well as for dress-up.
The speed at which the phenomenon occurs has changed since before installation.
I liked the presence and look of the Parts.
View detail