Reviews
Reliable Brand
It's KTC, so I can buy and use it with confidence.
I don't choose KTC as my only tool choice, but I think it's the one I would choose if I had a lot of opportunities to choose.
I enjoy buying the Manufacturer's stuff and types of tools whenever I want.
View detail
I use it for front axle.
I bought it as a tool to turn the Axle when removing and installing the Front Wheel.
It takes a surprising amount of time to turn it around in Ratchet.
With this tool, it is possible to detach and attach to SPIDI.
The Shake Type allows for a final tightening, but I used the Torque wrench, so I went with this type.
View detail
KTC is a safe bet.
9.I have been using a 5sq. 25?Spinner Handlebar, but I have a Bolt that I can't seem to loosen, so I bought this 40?Spinner Handlebar in 12.7sq.
This is a high quality tool with a Smooth grip, easy to apply force, and no rattle in the docket area.
It's a bit expensive compared to other manufacturers, but considering that it's a tool that will last almost a lifetime, I'd choose KTC for the price difference of about $1,000.
If you're wondering what to do with the tool to loosen the Axle Shaft on your big bike, you can't go wrong with the Handlebar.
View detail
A definite product.
The quality is very good and the performance is perfect. It does a great job of loosening and tightening the well with the fine GEAR, even when there is no angle. I think it is the tool I use most often with a 9.5 slot. View detail
It's cheap and convenient.
It is a very useful and convenient tool that you must have if you have an air compressor. View detail
Required for special vehicles.
The Axle Nut can only be removed by turning the rear wheel of AGUSTA with this spinner handle with great force.
I tried it with a short-handled Handlebar at first, but it didn't freak me out.
It's a necessity for those who remove the rear wheel.
View detail
This is my favorite tool.
A 1/4 Ratchet with a bent neck and adjustable angle for easy access to a variety of screws. It works great as a portable tool! View detail
This is my favorite tool.
I bought it for off-road touring and I love it because the size is small enough to fit in my Fanny pack and it doesn't get in the way. View detail
KTC for peace of mind
When you buy from We-Big, you'll get a discount and points back
I got a great deal on it I use it at work and it's a good product
With this, you can do a whole range of maintenance work
View detail
Finally I bought it
I've been wanting to buy one for a long time, but I didn't get around to it, but recently I finally did It's not likely to be used very often, but it seems to be effective when you want to work in a narrow space or turn it quickly It seems not to have many appearances, but it seems to be effective in working in a narrow space or when you want to turn it quickly I'm sure there are better and more expensive ones out there, but for me, this is good enough View detail
Cospa is good
I used to use a 36 pile Ratchet Handlebar that I purchased at Home center It has a small head and the 72 mountain is very comfortable to use and I like it It's also very comfortable to use:Pair (for Left and Right) I like the fact that the rotation switch Lever doesn't move when you touch it when you are turning it I use it often The good stuff I thought it would be a good choice, but I'm happy with how it feels at this price without the luxury View detail
I like the stretching feature!
I bought it as a maintenance tool
It works well enough as a Ratchet, but it has a telescoping feature that allows you to adapt it to situations where you need to exert yourself It can be used properly by stretching it out
I was satisfied
View detail
Flailing Torque is light
It is a 1/2 size Ratchet Handlebar
There's not much to do in the maintenance of a Motorcycle, but
There are occasional opportunities to loosen up the Axle and so on
It is convenient to have
Ko-Ken's Ratchet is good but the flailing Torque is light
A small number of GEAR is a drawback
There are a lot of situations where Ratchet can swing Large in 1/2 Size
You don't have to be a mainstream GEAR to use it these days
It is robust enough that it is not likely to be broken even if you hang a large torque on it because of the small number of GEAR measure
And Ko-Ken's unique Knurl process with a slippery handle that was cut into a groove seems to be a favorite But it's so great that I think it's the only one that fits
View detail
Used when changing Tire
I used it to remove the Axle Shaft I have a torque wrench with a length of 500mm, but it is better not to use it for anything other than tightening I was worried that the 300mm might be too short The Bolt of 88Nm Torque came loose easily It is the right decision because this length can be used for forest road touring View detail
Easy to use
Purchased for de-installation and removal of the large-textured Hexagon Bolt
The Grip was easy to grip and remove the hard Bolt with ease
I feel that it is a little heavy, but if there is 1 pc, it seems to be convenient afterwards
View detail
Good
I usually use KTC for the main part of the machine, but it is used in the back of the motorcycle and in relation to the interior of the car
I bought the Nepros because I thought the 4 degree feed angle would work in my favor
When I got the actual product in the cosmetic box, I was so beautiful that I didn't want to use it for work
I enjoy the Ratchet's ka-chica-chi sound by looking and touching it while drinking
View detail
Very easy to use!
Nut that takes a certain amount of torque
(The goal was Axle Nut.) after loosening the
The role of the T Type Handlebar is very easy to work with
The fixed grooves on the ends are also easy to use
I ordered the Size as an Image
I loved the comfort and the feeling of being able to hold it in place at the edges!
View detail
Good Cost performance
The function as Ratchet is sufficient and can be used without problems.
At this price quality and function are no problem.
I am worried about future durability.
View detail
Large Easy to use
Familiar with Size being appropriate. It is reliable use feeling. It's safe because Socket will not fall. I am loading in Box in Motorcycle. View detail
Easy to use
As expected it is easy to use koken.
Balance with price is also good, it is a quality that can be relieved.
Because Head does not become obstructive and disturbing like Ratchet Handlebar,
Spinner handle is useful for Quick work.
View detail