Reviews
[Contents] is substantial.
It is a Penetrating Driver, so it is very effective to use it with the Hammer. [Contents] You can use it efficiently in various situations. View detail
Directly from Manufacturer Sales
The company had a tone-in salesperson come to the company and promote the product. That's when I discovered the Digi-Torque and bought it.
This is placed between the Ratchet and Socket to measure the torque. When you reach the specified torque, you can hear a sound.
I use it for cars and motorcycles.
View detail
To adjust the Chain.
If you have a Motorcycle Chain, you can adjust it by yourself. The thing is sturdy and will probably last a lifetime. View detail
Suitable for Bar End removal.
Some people think that because the Kawasaki Bar End has a full locktite, you need a shock driver or impact driver to loosen the bolt. It is cheaper than buying an Impact Driver or paying at a motorcycle shop. View detail
The best
Gear wrenches are supreme with this tone pivot. I think the original was SIGNET, but the tone is the best. Even if you don't have all sizes, 8 10 12mm will change the world. I can't go back to the ordinary glasses anymore, even Rocket's Ratchet can't be used. It feels tedious. By the way, Gear wrench is the R in SIGNET, so to be precise, Tone is Gear I'm not a wrench, but, I don't need the details, right? View detail
Improving Maintenance Efficiency
It is difficult to remove the bolts and nuts from the box wrench in a narrow place The T-type wrench makes it easy to apply force and rotation It's easy to install and remove the Bolt because it's a replacement docket There is universal nature of wrench, and it is very easy to use I don't use the part of the Socket that exists yet, but it may be useful in the future It would be better if Plus and Minus Bit could be installed as well View detail
TONE Torx Socket
Tone torx socket is very useful to open the torx nut. Especially do not scratch the screw head and not be worn when opening the type of snail View detail
TONE Torx Socket 3/8
tone torx socket is very good, the material is very hard, so no screws are damaged when tightening, the finish is quite good with bright surface. The design is suitable for many working conditions. Especially handy when used. I very like it View detail
Compatibility with the company's Wrench Outclassing.
I use it with RM - 10 + RA 2. Like RM - 13 + RA 3, ease of use, appearance, all are satisfied. Adapteretc. Cheap Gear wrenchetc. There are things that are not connected well, but thanks to the combination of the same Manufacturers, it is easy to use and connected with certainty.
If I am the same Manufacturer, I think that looks are good.
View detail
I think that it is good for on-board tools.
In combination with the company Ratchet Glasses Wrench RM - 13, it is regarded as one of in - vehicle tools. Because Wrench is also TONE, I feel that the unity of appearance is also good. Also, the connection between Adapter and Wrench is also very good. View detail
Why is Webike selling higher than the list price.
I tried to purchase Pliers with high Cost performance with 150 mm size Simple, Shrimp and TOPetc. I bought it here compared with.
It is worth noting that the data posted on Webike is from previous MODEL or is completely different from the data of CP - 150 currently on sale. Since the performance of the data of the current MODEL is improved more than the published data, we recommend you to check with Manufacturer HP if you are considering purchasing.
By the way, the quality of the product is very high, it is natural but it does not compare with the on-board tool. Once you use good quality Pliers you will no longer feel like using an on-board tool.
It is not a very expensive tool and it can be recommended for many people because it can be used for a long time.
View detail
Quality as well as design is good
SK11 as Socket with similar performance "Bolt catchSocket" And Koken's "Nut grip" , And FPC "Catching Socket" There are, but since we actually purchased other than SK 11, this time TONE's "Nut catch socket" I would like to imprint.
Clearly, as none are designed under similar Concepts there is no difference in the performance in terms of performance. Perhaps the cheapest SK11 also has no problem performance, but the difference will be quality and durability. As long as you are not a mechanic at PRO, try SK11 and if you like it you think that it is better to buy famous brand items.
What I was curious was Design wrapped around SK 11 and Koken's rod Spring. TONE has adopted Board Spring as opposed to thinking that their appearance is not so beautiful, and I personally prefer this Design.
However, personal recommendation is made by FPC. The reason is that none of SK 11, Koken, TONE has the property that it is difficult to remove NutSingle Body from Socket, whereas FPC releases the Tension that sprung on Ball by spinning a hemispherical depression It is because it allows you to retrieve Nut easily.
Although it is a personal opinion to the last, if ranking the performance and quality as Socket (1) Koken (2) TONE (3) FPC (4) SK 11, and focusing on the Grip mechanism (1) FPC (2) (3) Is koken - Either TONE (4) SK 11 and Cost performance as Sunday mechanic is (1) SK11 (2) (3) (4) Is Koken - TONE - It is the impression that it said either one of FPC.
There are lots of work in narrow places, so if you drop down Bolt it will become an Large canon in such places that you can say that it is indispensable for this type of Socket surprisingly many options, please try looking for quality and price.
View detail
Unexpectedly not particularly dissatisfied that it would not be able to withstand high Torque
Recently "Lock" As visiting sales of Tone's agency called near the workplace, I asked for this.
There is an adapter for Ratchet glasses that is similar to KTC, but over there is 9. 5 mm, 3 / For 8 Inch angle, here is 6. 3 mm, 1 / It is for 4 Inch square.
By the way, in the case of Tone 12. 7 mm, 1 / For 2-inches and 3 / There is also for 8 Inch, RA 4,1 / Anyway for 2-inches 3 / As for domestic for Vehicle for 8 Inch, it is for 13 mm glasses which can not be said to be used frequently for flattery, and the KTC products corresponding to 14 mm will rise in ranking.
I bought it for use in a place not very high Torque, but it is quite useful although it is low use frequency.
On the other hand, it is a problem that it is too small and there is a possibility of loss, too Small is too hard to press release button. There is nothing I can do but I have no choice but to give up.
1 / When used in combination with spinning disc for 4 Inch, it is quite easy to use and is a good feeling.
View detail
TONE Tone Socket holder SH412
Hold number 1 Quantity : 2pc. I bought SH 412 of Set, but I changed the Clip to Quantity : 2pc. Set Remove The number of holds has been set to 10. Quantity removed : 2pc. Set Clip is handheld SH 406 (Hold number 6 pieces) We installed the number of Hold to 8. With this, SH 406 & SH 412 (Actually it is SH 410) It was a nice feeling. I bought SH 412 aiming at this effect. Clip installation & removal is easy.
Hold number 6 SH 406 is a little more clip and I feel like Hold number 1 Quantity : 2pc. Set's SH 412 seems to have too much clip, so we recommend SH 410 with 10 Holds.
Product of K company is uneasy because durability is not good because desorption response is not good because Clip is resin.
K company's warehold entrance.
View detail
It is an essential item.
When Maintenance and Custom are done, there are Screws that can not be turned by a normal Driver. But if you have this, use it with Single Body, or PlusMONKEY Wrench or Spanneretc. When used in combination with the tool of Torque by Toru, the Screw of the Large side turns. Because it is a Penetrating Driver, it will not break even if you hit GunGun with Hammer.
Plus minus also comes with 3 Size each and is user friendly. It was a half price at Sale this time, so I had a great deal of sense.
View detail
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove. Since each Long straight was high, an order for this comparat
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove.
Since each
Long straight was high, an order for this comparatively reasonable was placed.
Saved ~
View detail
[Webike Monitor] Although all the Sockets of the stock are plug 9.5sq Sizes, since they will become a plug of 12.7sq if they purchase the Socket of 32 and 36 these days and become a big Size, a conversion Adapters is [ Sockets ] needed and purch
[Webike Monitor] Although all the Sockets of the
stock are plug 9.5sq Sizes, since they will become a plug of 12.7sq if they purchase the Socket of 32 and 36 these days and become a big Size, a conversion Adapters is [ Sockets ] needed and purchases them.
It will become easy if the plug Size of all the Socket is unified.
View detail
It is a Manufacturer which is different since there was no 12.7sq although 9.5sq was using the Socket wrench set of KTC. It is easy to put in power that KTC receives cylindrically and TONE tends to grasp the form of the portion grasped by the hand by
It is a Manufacturer which is different since there was no 12.7sq although 9.5sq was using the Socket wrench set of KTC.
It is easy to put in power that KTC receives cylindrically and TONE tends to grasp the form of the portion grasped by the
hand by even structure.
Since it is 12.7sq again, it is weight strong [ structure ] and moderate.
This one is safer when applying a strong Torque.
It is whether it is [ feeling / both ] the same to have turned structure of
Ratchet part.
View detail
It found that the father treating the engine for races of the shop had removed the round and round and the bolt by T type wrench, and when the parenthesis was good, it had a longing and purchased. Very much, although imitation is impossible, it is con
It found that the father treating the engine for races of the shop had removed the round and round and the bolt by T type wrench, and when the parenthesis was good, it had a longing and purchased.
Very much, although imitation is impossible, it is conveniently used in itself.
View detail
It is used for the ratchet glasses of [Webike monitor] KTC. It does not fall, when an adapters has a ring for safety catches and ratchet glasses are equipped. Moreover, Locke of the socket sticks and a socket is also fixed. It is very easy-to-
It is used for the ratchet glasses of [Webike monitor] KTC.
It does not fall, when an adapters has a ring for safety catches and ratchet glasses are equipped.
Moreover, Locke of the socket sticks and a socket is also fixed.
It is very easy-to-use.
There are 1/4, 3/8, and 1/object for two, and it arranged all.
View detail