Reviews
Excellent adsorption properties.
It has very good absorbency and is very easy to clean up afterwards if it is prepared from the beginning for the work which may be splashed with water or oil. The large size Matte is easy to use and can be used for a wide range of purposes. View detail
It is highly magnetic and convenient.
It is very useful for picking up the Bolt or Nut that has been dropped in the back when working. It picks up with one shot without Stress which is annoying because of strong magnetism. It is easy to use because it doesn't stick to the surroundings by the effect of the tip Cover. View detail
It can be put back with light force.
It is useful for changing Brake Pads and can be used to push the Piston back without straining the Caliper. It is safe and effective as it does not require any force to even out the Piston etc. View detail
It has a luxurious feel to it
The socket itself is very strong and will not cause any trouble, and the mirror finish gives it a high quality feel. View detail
Cheap and multifunctional
I bought this to overhaul my Brake Master Cylinder.
It comes with four different tips, and by changing the direction in which it is inserted into the Grip, you can change the direction of the tip.
It can be used for both shaft and hole. The angle of the tip can also be changed, which is convenient, but storage Case
is not attached to the product, and the plastic Package of the product is used as it is.
It is not a tool that is used that often, but it is convenient to have because of its low price.
I think so.
View detail
I don't use it as often as I'd like, but … I'd be worried if I didn't tighten it up with this.
To replace the brake fluid on the GSX-S125, tighten or loosen the Breeder on the Caliper.
That's okay.
However, when I finished the work and tried to close it with the specified Torque... "Socket wrench. I can't plug in …
The reason is that there is a Crimp section of Brake hose in the straight line of Breeder.
(It's difficult to see in text, so refer to the image)
I think a super thin Deep socket would work, but you can't have a bunch of sockets of the same Size.
But with this, you can set the tightening point to "Offset. I can do that, so I can tighten it up properly and manage Torque. (In a manner of speaking) You can.
It may not be used often, but the Brake area is an important security component.
In the event of an emergency, you and others could be injured, so you want to make sure you have these things in place.
View detail
I just wish I'd known about it sooner.
The Hose that had been somehow removed by Pick tool and Pliers etc. can be easily removed.
It's such a shame that I didn't have the opportunity to learn about the existence of these tools.
Because the thickness of the tip is a certain amount, it is not possible to remove anything from the beginning only by this, but if you can shift the Hose by Pick tooletc. to some extent, the rest is easy.
It's a little expensive for a simple system, but I don't mind because the effect I get is Large.
Well, if I had to make an order, I would have wanted it to be thinner.
Anyway, you should have one in your toolbox. It increases both work efficiency and safety.
View detail
Out of reach.
The Magnet has just the right strength to pick up Bolts and Nuts that have been dropped out of reach. It is easy to use even if you extend the handle to the longest length because the non-magnetic Cover doesn't get stuck to the Parts in the middle. View detail
For storage in the car.
I keep it in my car to deal with sudden rain on the road. It is not only portable but also easy to use with its automatic opening and closing system. It is a folding umbrella that is convenient for storing in the car designed by One point of Sigknit. View detail
Mirror finish and Plating is beautiful.
It is used for the socket for MINIRatchet, but the size that is necessary for the maintenance of Motorcycle is Quantity:It is available in a set so you can work efficiently. The socket is very compact, so it is convenient for working in a small space. The appearance is also beautiful because of the mirror surface treatment. View detail
The quality is good and the price is Reasonable.
You can find the universal joint at home center, but the quality is good and the price is low enough to make you happy with the tool. It is essential for maintenance. View detail
The quality is beyond the price.
It is a must-have tool for use in tight spaces where the tool cannot reach the Straight. The joint does not wobble at the target point, so the tool can reach the bolt and nut firmly. The flexible angle of the tool allows for efficient work. View detail
Inexpensive, but it's working fine.
Due to the tightening of the drain bolt
At first, I wasn't sure if I should buy the Glasses Wrench.
I had the body to install the Socket.
I bought this one without the cost of gold!
This product is inexpensive, but the firmly and bolts are tightened.
I can do it, so it's very useful.
Good product
View detail
It is useful if you have it in Maintenance.
It has a strong grip, so the tool will not slip and it is easy to apply force to the tool, so the tool can perform as it should. It is a great tool to have for maintenance and it won't make your hands dirty. View detail
Convenient to have
It is used for the wire lock of Drain bolt and Exhaust Spring.
I used to do the wire lock with Vise grip, but it can be done cleanly and easily if there is a wire twister.
Circuit essentials.
View detail
It is essential for motorcycle maintenance.
The cushioning properties are so good that your knees and buttocks won't get sore. View detail
To carry.
It's convenient for carrying the necessary tools in a small size, and the large-portioned size covers the whole pocket, so you don't have to worry about scratching your MONKEY Wrench or other large-portioned tools. View detail
It won't mess up your Garage.
This is a useful oil absorption matte for maintenance work, and if you put it underneath for oil changes and the like, it will absorb the spilled oil and keep the floor clean. On a per spill basis, it is more affordable than buying Parts Cleaner. View detail
It works normally
I happened to … I bought a cheap one because I needed it.
It worked fine.
I don't know how durable it is. I've fallen asleep in the back of the toolbox ….
I don't think you need to buy an expensive one because it's not used very often.
That's enough for me.
View detail
Necessary tools for occasional use
When installing the RAM MOUNT on the Smartphone Holder, I grabbed the tool to tighten the Nut and thought it was 10mm, but to my surprise, it was 11mm:、、、、
I had a tool there, but I don't use 11mm, and I only have a Socket, which I can't use because of the length problem, so I decided to buy a Wrench.
As I don't use it very often, I thought about cheap tools, but I thought it would be meaningless if I broke it when I was about to use it because I thought it would be too cheap or too bad, so I heard of the brand name at least and was looking for a reasonably stable one.
I thought the Ratchet Type would be easier to use, so I went with this one, even though it's a little more expensive.
The quality is decent, not particularly good or bad, but it works properly.
If I'm going to buy a cheap Chinese tool, I thought I'd be more satisfied with a proper tool with a larger budget.
View detail