Reviews
The impression changes differently.
I do not want seasonal insects to fly in the coming season, I tried buying this.
Although I aim to convert to Carbon, there is also a case that Large Yu Screen dislikes feeling like uncle.
I tried running here, but the wind hitting the body decreased considerably. If Screen is a little longer, it seems that insects will not hit Shield.
I think that there are pros and cons for impressions because it changes with a glitch but it is cool if you get used to it. It also shines with sunlight Material : Carbon Style is beautiful.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI TL1000R, SUZUKI TL1000L, SUZUKI SV400, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, KAWASAKI ZXR750, SUZUKI GSX-R1000, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-7RR
Is it good to change Image?
I thought that OEMMirror would not change so much and would change it all the time. Although I was worried about Magical racing to be asked whether to make it Napoleu On of Tanax which is comparatively price-priced but I hear that it is expensive, in the end, if aftermarket parts at the time of broken can also be ordered and various sites I decided on Magical racing by comparing.
I think that the product is actually delivered and the product is confirmed to be good, but as expected, a lot of small bubbles such as air bubbles were seen in the part of Carbon. Perhaps it is good not to know at a distance, but it feels like getting closer.
Because it is a high-priced item, I would like you to take care of this kind of places too. Also I thought that Bolt was a bit hard to fix when I stopped the Joint and the BracketReverse side. Although it did not turn in the direction I thought I fought a bit but I made no complaints about other making.
I think that it is a commodity that does not lose even if it is purchased even though it is somewhat expensive.
View detail
Race ish Dress-up parts
Just cover the Meter and fix it with Double-sided Tape.
The reverse side is not bare glass fiber bare
There is no worry that it will hurt Meter because it is Gael Coat.
* There may be rubbing due to running vibration in the future?
The visibility of Meter information is also no problem. (Turn signal of the corner suffers a little)
The appearance changes like a glitter and becomes Race ish.
Since there are plain weave types and Silver carbon
Do not mistake the order!
* Image thing is plain weave type.
Quality well and attached with no processing.
Sticker is also included.
Because there is a gap between Cover and Meter,
Dust and sand etc. get in trouble.
View detail
Required Repair products!
Currently installed items are accessory items at the time of purchase, but we remove Under Cowl every time we exchange Oil, but there are linear cracks in Carbon as in the image, Bracket I will get stuck. I am very happy being able to purchase with Wa Big in Single Item.
The price is Material : I feel like I can not help it because it is Carbon, but I think that I can buy it a little more cheaply.
If you can, deal with Quantity : 1 Set of 4pcs. I wish I had something ... (^-^)
View detail
Mounting on DAYTONA 675
Buy DAYTONA 675 Tank scratch prevention.
Installation is only attached with attached double-sided tape.
Scratch prevention, it also became Dress-up and I am very satisfied..
View detail
Fits: BMW R1100R, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI TL1000R, SUZUKI TL1000L, SUZUKI SV650 (1999), SUZUKI SV400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1100
It looks nice.
Since the OEMMirror of the 90 year GSX - R 1100 has been broken, I exchanged a further thought. Whether the year was wrong or the position of the mounting hole was different, it was necessary to work the hole of the OEMBracket but because it is Carbon it is very light and it looks better. However, occasionally there are occasions when it is hard to see blurred by vibration during running.
View detail
FRP's Black Gel
Rear suspension changed so I bought for protection
No in-kind processing
It was easy to install.
Fender is not too thin, too thin
Clearance with Tire is not too narrow
I think that it is a good product
Just the adjustment of the suspension growth side is attached to the lower side of the suspension
I regret not having my hands
But, it is compatible with post-installation suspension and is not included in Fender's evaluation.
View detail
It looks nice
CB400SB (NC42) Painted to Red and fitted.
Instruction Manual Exactly attached to places as raw.
STANDetc. No interference at all, accuracy is no problem.
It functions as Oil receiving without problem.
..., but the body touches the ground before the Full bank floating and falls over.
It will not be used as it is at Circuit and Pass.
I get in touch with a little Gap on the street ride.
CB400SB (Or SF) It is that the design of itself is not a premise to wear an Under Cowl.
Sorry for the high degree of perfection in appearance.
Since it can not be helped, it shifted considerably in the front direction and it stopped with Tie Wrap.
While this is grounding the Under Cowl CHALYCHALY, you can do a full bank up to the extent of footpeg rubbing.
It seems like people in a riding way that does not let you bank in appearance is good.
View detail
Magical Racing chain guard for BUSA , curvaceous design , matches Gen 2 nicely , fit up is good and weight is almost nothing . Room for larger sprocket sizes , just a tidy , quality piece .
Magical Racing chain guard for BUSA , curvaceous design , matches Gen 2 nicely , fit up is good and weight is almost nothing . Room for larger sprocket sizes , just a tidy , quality piece . View detail
One device
I installed it in ninja 1000. Because it was a combination of OEMReflector to Fender Eliminator of Q Lever, we lowered Reflector with Bracket and installed it. The product is very beautiful. A little price - - - Is it expensive? View detail
Tank Pad
When it is leather Pants, there is Gap etc. at hang off, Position does not fit, so we were thinking about Pad purchase, but we found this high product with high Cost performance and purchased.
Because it is not by car model, processing such as cutting is necessary, but it is easy to cut with scissors, so processing is very easy. Also, than the thickness I thought (3 mm Meter) There is firm adhesion, the surface is also processed like SnakeSkin, so feel comfortable and Gapetc. No, I can firmly hold it.
However, since Material is Sponge, I think that it will be scraped when the number of contacts increases, so I think that it is necessary to change it at that time, but the price is much cheaper compared to other products, so even if the frequency of replacement increases I think there is no problem.
Because it is a very highly cospa product, it is recommended for those who are considering purchasing Tank Pad.
View detail
Magical racing
The installation was very easy. Mr. Magical racing. It was just like an OEM Parts Number and it was made to be involved in a fine depression in Body cowl. By attaching Under Cowl, the whole car body became very SMART finish. I felt L25 engine is lonesome for the past, and I am satisfied with Large on this finish.
Also, there are 4 places to tighten this product to Body cowl, but it is one shot with Drill driver. price - finish - I am satisfied with all the built-in.
View detail
The appearance improved.
In my case it is a One-off Full Exhaust System, so it interfered considerably with the Rear Fender mounting point, especially the installation of the Right Side was rather troublesome. We had to fasten the three of Swingarm, Rear Fender and Brake hose, which took time only here. However, if the other Ex 25 system is still in OEM and the Slip-on Silencer does not interfere with the Rear Fender mounting part first, I think that installation is possible without difficulty.
With Rear Fender, the heavy feeling increases on the rear wheels, and the whole body becomes SMART.
I bought it was a correct answer!
View detail
Devices need to be devised
It is good to have a strong appearance. When attaching the attached Washer and tightening Screw, the crack will run on the surface painting although it is not tightened by being large. Because I want to tighten to some extent, I purchased Material from Home center instead of Gold Genus Washer : Tightened using Rubber's Eyelet. If the rest is left as it is, the beating sound is so terrible that if the Sponge for the home center's vibration countermeasure corner was stuck on the front of the Meter case and let it dig into Cowl, the beating sound disappeared.
View detail
Essential items for Passes and Circuits
Breaking Cornering so I can support my body with my stomach
When I am free with my arms and dropped my ass in Cornering, my outer legs
The outer leg load gets caught and cornering falls.
Installation is fixed with Double-sided Tape and Rivet, but it seems Large is tough as the Fit feeling of the product is excellent even with Double-sided Tape alone.
Recommendation for those who run pass and Circuit at SS.
The looks also looks like a Big tank like 8
So it is also a bonsai recommendation. (Lol)
View detail
Surface Finishing (Luster) Is amazing
I compared it with other companies famous for KATANA, but it was the correct answer by choosing this item. It was natural that it was lighter in width than OEM, and I was surprised by the beautiful finish than I expected. Of course there is no problem with Fitting. View detail
Introduced to add gow to Cowl and take Balance
By attaching Large type Cowl, we made it worn around behind and made this product easy to install. The delivery date took about two months for Production to order, but the texture is high. Bolt-on attached to Bolt on the Seat side, Fitting was also worried, but installation does not hurt Cowl comes cleanly. Once, I use protected tape in protection inside Cowl.
It is perfectly Image-like because Volume comes out considerably.
However, the amount of gold will be pretty. Because it is Carbon, it can not be helped,
I think that it is easy to introduce it if it is a little cheaper.
View detail
I chose with trust Magical
Regarding products, Fitting was also perfect for OEM Shape with no mistake Brand. I chose Smoked color but it is not too dark and not too thin, it feels just fine.
By setting Screen to Smoke, it seems that the entirety got quite closed.
However, it was short and regrettable whether Windscreen Mole included was Universal.
It was a product with high satisfaction if it were overall. I can recommend it..
View detail
Endurance CowlSpec. In!
I use products of Magical racing quite a bit, but Quality as a product is not complaining. Fitting is also good, and this product is convenient for Carbon because price is reasonable and I think that it is easy to change Image.
It is easy to attach because it only installs according to existing Bolt.
However, since it was quite exactly Fitting I thought about putting a protective Tape on the Reverse side, but when I put a protective Tape, it floated and it did not attach firmly.
Recommended for both price and design.
View detail
Parenthesis is good!
The hole to insert the Nut etc was different from the OEM, so it took me extra time to install, but such a thing is okay!
From now on I will customize R25 with MRCarbon property Custom parts (* - Ω - ノ
View detail