Reviews
Spare required.
Shield, Sun visoretc. I bought it.
Plastic parts are not uneasy if there is no Spare... It is a place not too much fun, so it is not easy to break so easily, but since you prepared Spare with Y's Gear, I bought it because I should purchase it.
View detail
![Ventilation Liner For Helmet [Electric].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-09-01_TS.jpg)
Combined with quick-drying cap, the effect is dramatically increased
With Ventilation without Half Hel. I am doing it..
Fitting to the head of Helmet itself was improved, and I felt that the wind passed through the gap created by AirHead.
In summer, when combined with quick drying Cap, my head got stained and Risk of heat stroke drastically decreased.
Recommendation for those who have translation in only half Hell.
View detail
I want the texture to be better.
I purchased it because I accidentally damaged Shield base when I exchanged Shield.
Although it is easy to install, the texture is cheap, as dictated by the previous one, it can not be said that the durability is also high in flattery.
It is a fixed part of Shield, so I'd like you to raise the precision of the part where the shield's nail is plugged in particular.
View detail
![Ventilation Liner For Helmets [Checkered].](https://global.webike-cdn.net/photo/article/86/1449414671086L.jpg)
My hair did not go to sleep. Avoid headaches as well - - -
"The hair goes to sleep" It was 2013 that I bought the sort of AirHead that was the first effect of the effect. Since it was introduced in one magazine, it became short at a stretch and went out to buy it to Motorimoda.
Although I did not sleep properly when I wore it, my head hurts if I am short haired and do it for an hour. In the beginning I had patience but I could not stand it anyhow and eventually entered the storage. "I do not recommend using people with short hair" And although the explanation was written - - -
Two years have passed since then "Would you like to try a little bit if you lay it down?" One day suddenly comes to mind. In the scissors at the top of the head, scissors. Then how about it, the effect that the head hurts like a lie and the hair does not go to sleep may last on!
I think I should have tried it faster, but there was resistance to saying something that is not cheap as a part.
Although this usage may not be recommended, headache will disappear if cutting the protrusion of the part whose head hurts in a little range. Trial is self-responsibility.
View detail
![Ventilation Liner For Helmet [Electric].](https://global.webike-cdn.net/photo/article/86/1445092165786L.jpg)
I was interested in it.
I do not want to smear Helmet's interior with sweat and I am wearing it while wearing Cap, but it is troublesome to wear Cap. I thought that I could solve such dissatisfaction, I purchased it with interest.
Since the timing is not summer, I will have to subtract that amount, but since my hair will not be perfectly patchy, I'm just feeling a bit better. I also want to check if there is no sense of incongruity after trying a long ride.
View detail
![Ventilation Liner For Helmets [Checkered].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-05-01_TS.jpg)
it's recommended
I tried it in summer with JCruise and HORNETDS.
Nothing seemed to hurt my head, I understood that the wind passed and the comfort was up..
Also, the hairstyle will become hard to become Flat.
If you are a bit cheaper, I'd like to buy every Helmet.
View detail
Pretty useful
I used it for Full face. It became a bit narrower and cramped, but the flatness of the hair has improved considerably.
When wearing a part of a wartsboot so as to hit the forehead, the trace of wartsboots gets cluttered, so it may be better to note the positioning.
View detail
Size is important
Certainly it prevents collapse of the hair at the time of taking off to a certain extent and it also feels the flow of air.
Just size Helmet is tough, there is a danger that jaws will come out.
As for kore, there is nothing non-to the product itself though w
That's why those who are using Large-sized Helmet are using hair - - - For those who like it is a Recommendation.
We did not particularly feel about the pain that other people are well written for.
View detail
Excessive Large expectations are prohibited
Prevent hair collapse and buy to improve breathability.
Helmet is OG KKABUTO ASAGI.
I could do installation without suffering anything.
(About a moment Quantity : Pair (for Left and Right) I did not understand)
Because I expected so much,
I was not feeling much effect.
Breathability and collapse of hair.
If it is a bit cheaper "Is this like this?" I guess it might have been.
View detail
![Ventilation Liner For Helmet [Orange].](https://global.webike-cdn.net/photo/article/72/1435512156472L.jpg)
Hair does not collapse !!.
【What made you decide the purchase?】
Perhaps I have been interested in it for more than two years and I put it in the Motorcycle shop, so I first bought it with one wig Big.
A year later, this time it is purchased at Repeat. The picture is attached to Arai's RX-7.
I installed it without gapping in another Helmet, so I think that any Helmet is OK. It's Rubber, it's just a fake.
【How was it actually used?】
It hurts if I suffer Helmet for a long time.
To be honest I think this is familiar. Lol
There may be people who do not agree, but now it does not matter.
【Was it difficult to install? (Hard parts case)】
I am attaching a pump. As soon as I'm worried, I would like to attach it to the Center. Lol
【Please tell me the point of installation and hang (in the case of Hard parts)】
Put the target in Center, Pong.
[Is there anything I was disappointed about?]
Is it expensive?. The price
【Hope for Manufacturer - Please let me know if you have any improvement points]
Variation highest ~. Will not you manage the price anyway?.
【Have you compared items?】
What is wicked on your head.
[Others]
"Is there such a thing?" It is Don Pissha Items.
View detail
![Helmet Ventilation Liner [Skull And Bones].](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-02-01_TS.jpg)
It's okay
I wanted such a product from before, I'm happy. It feels cooler on the whole rather than through the wind and sweat does not stick directly to the hair, so it does not have to stick to it.
On the other hand, if the shape of the head is equal etc.. It is not so, some Ibobo feels painful. I wonder if it is better to soften the wartsboot a little more.
View detail
From June
Introduced in June. The feeling that the wind passes through is pleasant. It certainly does not say that the hair is strange or strange Habit and it is not disturbed, so the evaluation is high for this part. But Ibobo sticks to the forehead of the forehead and it will be 4 because it will hurt depending on the position. View detail
Not available.
After attaching to Arai's ASTRO-IQ, the gold tool hit Moro at Nodobotke, it gave me a lot of pain, so I gave up using it.
Even in a light fall accident, I think that I will do Nodobotoke if a force is applied from the front.
This can not be used.
View detail
A little disappointed with low durability.
Since the Screw of the flip up portion of the CR - 4 that I normally use was loose, I tried to remove the Shield to tighten it again, I broke the nail of the Shield base and purchased it as for Repair. CR-4 itself has already been discontinued, but this part was saved because it was a common part with CR-1 modify.
The exchange itself is easy, but the material itself seems to be brittle, so I tried to install the shield after replacement, and a part was missing. Although it is used as it is because there is no problem, it seems better to think that this part is a consumable item.
View detail
It is reliable to be moved by the structure which main structure parts carried out firmly by metal. Therefore, it matches on the Jet type Helmet of black rough [ for American motorcycles ] well. Satisfactory also in price. however, it is the very meta
It is reliable to be moved by the structure which main structure parts carried out firmly by metal.
Therefore, it matches on the Jet type Helmet of
black rough [ for American motorcycles ] well.
Satisfactory also in price.
however, it is the very metal -- originating -- it is felt a little heavy.
Moreover, I thought that it would be better if an outline dimension is brief to a slight degree on the whole.
A demerit mark was given to one * at this point.
However, I think that good shopping was carried out as comprehensive evaluation.
View detail
It is nostalgic. It used also 25 years before . Since it is convenient, it uses recently, buying it again. Since it is somewhat heavy and some painful times have a jaw, it is -one point. Since a stronger One-touch clip than this is not k
It is nostalgic.
It used also 25 years before
.
Since it is convenient, it uses recently, buying it again.
Since it is somewhat heavy and some painful times have a jaw, it is -one point.
Since a stronger One-touch clip than this is not known for the moment by
, I think that this is good.
View detail
Yamaha It attached to YJ-5. The Snap button removed and attached. most worrisome, metal fittings are equivalent to the Adam's apple -- you must just be going to adjust looseness a few. Since the Size of a Helmet is S, it may be that it is too many worr
Yamaha It attached to YJ-5. The Snap button removed and attached. most worrisome, metal fittings are equivalent to the Adam's apple -- you must just be going to adjust looseness a few. Since the Size of a Helmet is S, it may be that it is too many worrisome. I would like to try for a while and to judge. View detail
Since desorption was troublesome at the Belt type, the jaw string of an ARAI's Full face currently used attached this One-touch clip. Although surely it could remove easily and became convenient single hand, since the feel when it inserts in is blun
Since desorption was troublesome at the Belt type, the jaw string of an ARAI's Full face currently used attached this One-touch clip.
Although surely it could remove easily and became convenient single hand, since the feel when it inserts in is blunt, they are uneasy goods which remain a few.
An after [
] metal part rusts easily for a while.
View detail
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD. It exchanged together with exchange of a Screw. As a required Parts, a price is also cheap, and attachment is also easy. Since appearance only carried out
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD.
It exchanged together with exchange of a Screw.
As a
required Parts, a price is also cheap, and attachment is also easy.
Since appearance only carried out Plating paint application in fact at the Plastic although seemingly it was metal, it is clearly cheap structure.
since it is merely exclusive elegance, it is satisfactory at all to the function itself -- it is .
View detail
The Items which enables it to desorb simply the Helmet which adopts D ring system by a Buckle. Since it is overflowing on the Net, is anyone of how to attach problematic? As comment, it is the place that it is so so. It is charm tha
The Items which enables it to desorb simply the Helmet which adopts D ring system by a Buckle.
Since it is overflowing on the Net, is anyone of how to attach problematic?
As
comment, it is the place that it is so so.
It is charm that can cancel Locke of a Helmet easily.
Compared with what is equipped standardly with AVAND of OGK, etc., a function is inferior in
.
Although it turns out that it was acted as Locke of that of
AVAND at the feel made into the Snap, the direction of an One-touch has almost no response.
The former receives that it is with a Center Button, the latter is contrary to appearance, and
Locke's release method is also a SIDE.
Since it is
metal fittings, it is also a subtracting point that there is some weightiness.
This point is whether since it is the durability of goods, and a trade-off, it is unavoidable.
Let's be ready for it and purchase that it is a
general-purpose article.
View detail