Reviews
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM
May be difficult for amateurs to assemble
My jc92PetitCustom started to slip on the clutch because I open the throttle on mountain roads a lot, so I changed it after 8000km.
I put in a high camshaft and it revs high but does not accelerate, maybe the clutch was starting to slip, and the oil gets dirty a lot.
I've also changed 6 springs, but the Engine RPMs don't go up on the tough climbs, and the Engine RPMs come down in their own way.
Rear Sprocket is set to 36, but I'm going 100km/h in 4th gear where there is an uphill lane.
I can now run close to /h.
View detail
Fits: HONDA CB400 SUPERHAWKIII CB400N, HONDA CB400 SUPERHAWKIII CB400N, HONDA CB400TII CB400T, HONDA CB400TII CB400T, HONDA CB400T CB250T, HONDA CB400T CB250N, HONDA CB400 SUPERHAWKIII CB400D, HONDA SUPERHAWK 250 77-79 All models, HONDA SUPERHAWK 250 Reverse 77-79 All models, HONDA All HAWK 250cc models, HONDA All HAWK 400cc series models
It will be heavy, but …
Clutch is heavier but cuts well
No more GEAR loss.
Make sure you prep them well.
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
I've only just assembled it.
I changed the Reinforced Clutch on my SUPER CUB 50FI 3-speed AA01 when it was bored out. It was my first time to replace the clutches, and it took a lot of work, but even I, an amateur, was able to do it.
I gave it 3 stars because I don't know how effective it is or how durable it is since I've only assembled it and am still in the process of boring it up.
I would like to make another impression after the other work is done and the break-in operation is completed.
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
High cost performance
SP Takegawa SPTakegawaReinforced Centrifugal Clutch Kit (32-Weight) I bought it because I needed it for this time.
As far as usability goes, I think it's safe to say that it's neither acceptable nor unacceptable
Maybe there are better products out there if you look for them, but as I am now
I'm under the impression that it doesn't have to be such a high quality product
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
Fits: HONDA SUPER CUB 50, HONDA DAX, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA XR50R (for competition), HONDA SUPER CUB 50, HONDA solo, HONDA GIORCUB, HONDA CRF50F, HONDA Z50R
I did not need to strengthen
I installed it in CUB 90. It is an exchange as I was feeling something wrong with Clutch. Engine Displacement Volume is still NORMAL, but it is Engine which is upgrading, balancing and balancing, port processing etc. and power up. I thought that it would be better to strengthen and I chose this. Result NORMAL seems to be better. I guess it's gonna be funny after all.. We reduced the number of sheets. I am not familiar yet but I think I will take a ride for a while. After all there is a limit in Centrifuge Clutch. View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
It used for centrifugality-ization of 3 bulb engine. When even around 100 cc is used for 125 cc like tolerance, it has slid on the attached clutch spring. In that case, the recommend of the strengthening spring specification of JUN and the 32 weig
It used for centrifugality-ization of 3 bulb engine.
When even around 100 cc is used for 125 cc like tolerance, it has slid on the attached clutch spring.
In that case, the recommend of the strengthening spring specification of JUN and the 32 weight of Mukawa is carried out.
View detail
Fits: HONDA MONKEY BAJA, HONDA CL50, HONDA CD50, HONDA MONKEY R, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA MONKEY RT, HONDA JAZZ, HONDA Benly50S, HONDA MAGNA50, HONDA MONKEY, HONDA 12VMONKEY, HONDA 12VMONKEY
Since displacement up was carried out, and it was safe, it exchanged for 88 cc. The time and effort of attachment seldom changes that it is pure. Considering the amount of money, I think that it is good. However, it was uncomfortable until it
Since displacement up was carried out, and it was safe, it exchanged for 88 cc.
The time and effort of attachment seldom changes that it is pure.
Considering the amount of money, I think that it is good.
However, it was uncomfortable until it got used, since he liked touch that the clutch of a pure one-sheet disk was connected.
It is better to do carefully enough rather than having written adjustment of touch that an after clutch is connected on the description.
View detail