Reviews
Fits: SUZUKI Address V100, SUZUKI address V125
Probably 2000rpm UP Spring
For ADDRESSV125. Probably 2000rpmClutch meatTimingUP RedSpring.
If you weigh 85kg, at least WR weight is lighter than 16g, and under the condition that an external exhaust system is installed, it will be faster from low speed to high speed. However, the clutch will wear faster than the NORMAL because it meets at higher rpm.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125
Addressv125.
I use it on my 184cc addressv125.
I tried a lot of drivetrain systems, and I ended up with this one for Belt. The length of the rose tree varies from one individual to another, but it's enough for me since I'm not racing.
The Sensep is an OEM nail cutter with no problems at all. The cooling system has been designed to minimize the loss of belt and it will last for 10,000km even if you drive in town or at high speeds. I hope you will continue to sell this product.
View detail
Fits: YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA Jog Z, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX [3YK1-5]., YAMAHA 3 clutch car, YAMAHA 2-stroke scooter
good product and fast shipping
About quality and texture 10 About the feeling of use 10 Products to buy together Difficulty of installation easy Cost performance and comparison with other products good parts About shipping and packaging good packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX150, HONDA Click125, HONDA Spacy125, HONDA LEAD125, KYMCO GRAND DINK125, KYMCO GRAND DINK150, SUZUKI ADDRESSV125, SUZUKI Avenisu, SUZUKI swish, SYM RV125, SYM RV150
0.WR in 5g increments
KN Project Dasan Only Round TypeWeight roller (WR) Weight is set in 0.5g increments (And then there's the oddly shaped Dr. Pulley) 。
The same is true for all WRs, but since there is BALI, just remove the BALI with sandpaper, etc. and the rotation will be smooth.
WR weight matching is possible down to 0.1g, and the same number of grams is placed diagonally for smoother rotation loss. (without eccentricity) The WR of KN project had an error of ±0.1g, which is a normal accuracy.
Durability is normal.
The price is half that of a well-known manufacturer.
No Grease required for WR (It will be a resistance, and it will also lure in Beltkus, which will also be a resistance). Axel full open highest speed to full closed/full Brake to full open (Re-acceleration) When the stickiness is a little bit by Grease etc. at the time of (resistance) Response is delayed if there is a
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125ABS, YAMAHA NMAX150, YAMAHA NMAX155ABS, YAMAHA NMAX155, YAMAHA NMAX155
Cheap but not high quality impression
I purchased this product as an OEM replacement. Unfortunately, rust was floating on the surface at the time of purchase new….
The plating itself was not floating, so I polished it and used it. The Pulley boss was already worn out, so I replaced it with a Smooth gear shift.
If you are concerned about rust, OEM is better because they take measures by wrapping rust-proof paper to prevent rust from occurring.
View detail
Fits: YAMAHA Super Jog ZR, YAMAHA BJ, YAMAHA BWS(BWS), YAMAHA APRIO, YAMAHA JOG APRIO Type 2, YAMAHA SUPER JOGZ, YAMAHA Remote controller jog, YAMAHA VINO(2Cycle), YAMAHA Remote controller jog, YAMAHA VINO(2Cycle)
I guess it's worth the price
It wasn't what I expected, but it wasn't bad either. View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX
The feeling of shifting gears has changed quite a bit.
The Belt was replaced because it had traveled 18,000 km since the last Belt replacement. When we looked at the removed Belt, we found that it had not worn down to the limit of use, but the side angles were worn and attached.
I was worried about how the shifting would feel after installation, but I got the impression that the shifting became smoother, which was a good impression. However, I had the impression that the Engine RPMs dropped a little when shifting throughout the entire range, and the maximum speed dropped. (Tears)
I need to re-set with Weight Roller.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
OEM's with Stages for acceleration modification.
As a precaution for installation, …Crank is an Opposite Thread Screw and the length of the Spline is limited, so there is a possibility of crushing it if it is tightened too much.
Grease is applied to the WR, but it is too little, so I applied additional grease. The Plus screw on the back cover is hard, but it loosens easily with the Impact Driver.
The PRESS processing on the back cover is rough in some areas and requires a compromise by the user.
The performance is more than sufficient, and although it may not be as good as the High Speed Pulley, it accelerates linearly with the Axel without any staggered acceleration.
To take advantage of the High Speed Pulley, it is necessary to consider the driven side as well, so if you are assuming that you are going to install it by itself, I think you will not be dissatisfied with this Pulley kit.
The weight of the attached wr is also a good feeling. I think it could be a little lighter for a young girl.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
It could be used for OEM Product.
Could be used for OEM; not recommended for vehicles with Power out. View detail
Can be used without problems.
OEMClutch was replaced to reduce weight.
The cost was low and the product could be used without any difference from OEM products.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX
It was solid enough to be named Reinforced.
I don't feel anything when I drive the Belt itself.
The replacement process is the same as the NORMAL treatment.
View detail
Fits: YAMAHA Champ 80, YAMAHA Jog 80, YAMAHA Champ 80, YAMAHA Jog 80
KN performance drive kit
About quality and texture Good quality About the feeling of use Feel strong Products to buy together Varial type of roller gram Difficulty of installation Service at scooter shop to install Cost performance and comparison with other products For more pickup and acceleration compare with original factory About shipping and packaging Good packagingikjuuufvvv Any concerns, cautions, or advice when purchasing I think this kit give more confident to use! View detail
Cospa best
After replacing the OEM at 20,000 km, we used this Belt for 17,500 km. ('Large body every 2500 km as we check the drivetrain)
I replaced the rubber on the SIDE because I found a broken spot with a "HUDDRILL", but I think it will last for 20,000km.
The new model is slightly thicker than the OEM model, so it is more acceleration oriented.
I am very happy with the quality of the product and the price.
The recommended Weights are 3 10g and 3 9g, the same as LETS4 and Address50φ17×12mm can be used.
View detail
Fits: HONDA DJ-1L, HONDA CABINA 50, HONDA GYRO CANOPY, HONDA GYRO CANOPY, HONDA BROAD50, HONDA DIO, HONDA DIOSR, HONDA G DASH, HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1RR, HONDA LEAD50, HONDA JOKER50, HONDA Giorno, HONDA TACT, SYM DD50, HONDA Live Dio Cesta, HONDA LIVE DIOZX, HONDA LIVE DIO ST, HONDA LIVE DIOSR
Clutch connection is also Smooth and usable without any problems.
After purchasing a GYRO CANOPY (TA03) with a mileage of 70,000 km, I checked the condition of the drivetrain and found that the clutch was in good condition.
The wear limit was exceeded, so we decided to use the for RepairClutch outer, OEM Center spring, also by KN Kikaku, and the
We replaced them at the same time.
The quality is comparable to OEM products and the price is reasonable.
Now we are hoping for durability.
View detail
Fits: HONDA TODAY, HONDA Super Tact, HONDA JOKER50, HONDA CABINA 50, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPYTA02, HONDA GYRO CANOPYTA03, HONDA Giorno, HONDA SUPER DIO, HONDA SUPER DIOSR, HONDA SUPER DIOZX, HONDA TACT, HONDA DIO, HONDA DIO, HONDA BROAD50, HONDA LIVE DIO, HONDA LIVE DIOSR, HONDA LIVE DIOZX, HONDA LEAD50
It's cheap
After purchasing GYRO CANOPY with a mileage of 70,000 km, I checked the condition of the drivetrain, and found that the clutch was in good condition.
The wear limit was exceeded, so we decided to use Clutch for Repair, OEMCenter spring, also by KN Kikaku, and
We replaced them at the same time.
The quality is comparable to OEM products and the price is reasonable.
Now we are hoping for durability.
View detail
Fits: YAMAHA MAJESTY125, YAMAHA CYGNUSZ, YAMAHA BW'S R, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S125, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
I think it's generally good.
This time, I have not been able to experience the effect from NORMAL because I have combined the Subit CVT with the High Pearl Clutch and HYPER Rev Torque Camshaft of the same manufacturer and Wide range Torque Pin of KN Planning. I think that the small diameter pin will increase the range of the SecondPlate from fully closed to fully open, which will physically improve the acceleration to the maximum speed.
As you can see in the other impressions, there are some people who are worried about the grooves and clearance of the Torque Camshaft, but the feeling of the assembly is not that some kind of Judderetc. appears at every acceleration and deceleration, and since it is divided, there is also a bare link effect, so I think there is no particular problem in using it.
In the meantime, we incorporated more Grease.
I think this is a good part to try at a good price point.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI HI UP
Beware of Ramp Plate
We introduced this system to reduce the RPM when cruising. As a result, the RPM was reduced a little. The maximum speed seems to have improved by about 5 km.
It was a full set of High Speed Pulley, Ramp Plate, Pulley boss, Belt, 3 different WeightRoller×g, and Clutch Spring, but only the PulleyBody, attached WeightRoller and Belt were used. I used only PulleyBody, attached WeightRoller and Belt.
Pulley boss has ShimQuantity compared to OEM:It was about 1 pc. minutes long. it could be used for SignalGrand prix, 50m run, and Setting.
Also, as for the Ramp Plate, I used the OEM one instead of the Crankshaft one because the engagement of the Ramp Plate was too delicate, which may be due to the wear condition of the Crankshaft's splines. I think you need to be careful here.
The durability is 2 stars because of the splines on the Ramp Plate.
View detail
Fits: YAMAHA BWS R2JS Taiwan, YAMAHA BWS 125 Type 2 BG1FOR JAPAN MODEL, YAMAHA CYGNUS X 5-inch B2J Taiwan, YAMAHA CYGNUS X 4-inch 2UB Taiwan, YAMAHA CYGNUS X 4 type BF9FOR JAPAN MODEL, YAMAHA BWS X46P, YAMAHA BWS 1255S9, YAMAHA CYGNUS X 3 Type 1MS Taiwan, YAMAHA CYGNUS X 3 Type 1YPFOR JAPAN MODEL, YAMAHA CYGNUS X 2 Model 4C6 Taiwan, YAMAHA CYGNUS X 2 Type 1CJ Taiwan, YAMAHA CYGNUS X 2 Type 28SFOR JAPAN MODEL, YAMAHA CYGNUS X Type 1 5TY Taiwan, YAMAHA CYGNUS X Type 1 5UAFOR JAPAN MODEL
Buy it because it fits
NK Planning's products are a little more expensive.
I would be willing to pay a premium if the quality were a little better.
View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA Majesty S, YAMAHA Majesty S
Good
After the replacement, I feel that it is better than the original one. Durability will be known only after riding it, but I am satisfied with it for now. View detail