Reviews
KITACOConveniencePartsK - CONBolt cover For 12 mm across flats
【What made you decide the purchase?】
This KITACOConveniencePartsBolt cover is an Items that you can easily Dress-upCustomization easily and quickly in a short time.
【How was it actually used?】
I am wearing all this KITACOConveniencePartsBolt cover on the head of Bolt that enters. (Excluding high temperature part)
Even if this KITACOConvenience PartsBolt cover is attached, fuel efficiency will not improve or running will not be faster, but it will be fashionable and Parenthesis better without complaint.
【Mounting was difficult?】
Just put this KITACOConvenience PartsBolt cover on the head of Bolt like Cap and complete installation. it's simple.
【Please tell me the installation point and hang】
I put this KITACOConveniencePartsBolt cover on the head of Bolt and press it. Actually, if you push it to the back, if you put it in, you can not come off unless Lever is raised by Slotted screwdriver when removing it.
Moreover, if you increase Lever, this KITACOConveniencePartsBolt cover will crack with 100% chance. (You can also break even if you grab it off with Pliers. )
So when putting this KITACOConveniencePartsBolt cover on the head of Bolt do not insert it tightly enough, just keep it covered up to the position where it will not fall off, without breaking this KITACOConveniencePartsBolt cover attached at the necessary time KITACOConveniencePartsBolt Just grasp the cover with your fingertips and pull it to remove it.
(Since it will not break if you remove it with your finger, this KITACOConveniencePartsBolt cover can be reused)
[Is there anything I was disappointed about?]
I understood, but it faded due to direct sunlight and ultraviolet rays, it faded and as it is it is a poor smell so we recommend to exchange all of this KITACOConvenience PartsBolt cover every few years.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to make it stronger against direct sunlight and ultraviolet rays.
【Have you compared items?】
Compared to with Color Anodized FinishingBolt, this KITACOConveniencePartsBolt cover is more luxurious.
However, it fades. However, Bolt with color with Anodized Finishing fades though not so much.
.
View detail
Makeup Cover for Hexagon Bolt
【What made you decide the purchase?】
I decided to buy Bolt made by Anodized thinking to make head of martial Hexagon Bolt fashionable to Beauty with gusset which exists in each part of Motorcycle, I count Size and number in Motorcycle Parts catalog and estimate with Webike However, Bolt made by Anodized did not really like strength, but abandoned each Bolt 's Anodized.
After all it arrived, we used this KITACOConveniencePartsK-CON Bolt cover instead of Anodized, Hexagon Bolt Material : Plastic makeup Cover.
【How was it actually used?】
1pc. It will cost 70-80 yen per hit, but if you attach it to each Bolt head, it will be very elegant and very Parenthesis better.
【Mounting was difficult?】
It is easy because it only pushes into the Bolt head of each place.
【Please tell me the installation point and hang】
I think that it is safe to stop using because it may melt at the part with the heat.
Even if it does not melt with heat, there is a Demerit that resin deterioration progresses remarkably with heat and the beautiful vapor deposition ColorPlating of this KITACOConvenience Parts K-CON Bolt cover fades away.
[Is there anything I was disappointed about?]
Although it is understood, it is weak also to ultraviolet rays and direct sunlight because of weak heat.
I am using it at the moment that evaporation ColorPlating will fade quickly.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it will be very poor and smell when it fades, I will exchange it for this new KITACOConveniencePartsK - CON Bolt cover as I see it, but since it is frequently exchanged and there are many numbers, 1pc. I recognize that 70-80 yen is a very expensive Items.
I would appreciate it if you could study the unit price a little more or to develop and provide products that are more resistant to ultraviolet rays and direct sunlight.
【Have you compared items?】
Bolt cap as an industrial product has many products for protection and protection that are inexpensive, durable and resistant to ultraviolet rays, but only products without sex appeal.
However, this KITACOConveniencePartsK-CON Bolt cover is a cosmetic product with very sexy gloss.
I always try to keep my inventory out of stock so that I can exchange it immediately.
.
View detail
Fits: HARLEY-DAVIDSON Sportster Family, HARLEY-DAVIDSON softail family, HARLEY-DAVIDSON dynamo delta, HARLEY-DAVIDSON Touring Family
BrassMaterial feels good!
I used the included Double-sided Tape and fixed it with Screw alone. Brass looks nice and shines cool. Next time I will buy MeterRing and Key cover. View detail
Easy and nice
Cool of pla is enough.
However, I did not know whether the color was peeled off in the process but the coloring was insufficient while it was delivered, but there were individuals with parts that were not colored.
At first, I thought about returning as a defective item but sometimes referred to as low cost, and as a result of considering countermeasures somehow, I could hide it well with an oil pen.
It draws that point and it is four stars.
View detail
It is profitable
I bought it for Dress-up around APE 100's Handlebar.
I replaced the Bolt of Handlebar Clamp for Cap bolt 8 MX 35 mm and use it as shown in the picture.
I am satisfied with my self, but I like the image and I like it.
This product has so many entries that it is very profitable.
View detail
Three caps in a pack. Protect your bolt heads from the elements and add that custom look. Just make sure you order the correct size for your usage. Reasonably priced and look great on my bike. Very satisfied with purchase and took less than a week to r
Three caps in a pack. Protect your bolt heads from the elements and add that custom look. Just make sure you order the correct size for your usage. Reasonably priced and look great on my bike. Very satisfied with purchase and took less than a week to reach me in Singapore. Great job WEBIKE team! View detail
This is an exclusive cap to block up a cap bolt hole, but unfortunately, only sizes down to M6 are available...Cap bolts of M5 size are frequently used as motorcycle parts, so I was at a loss.I happened to find one day that M6 could be use
This is an exclusive cap to block up a cap bolt hole, but unfortunately, only sizes down to M6 are available...
Cap bolts of M5 size are frequently used as motorcycle parts, so I was at a loss.
I happened to find one day that M6 could be used to M5 if a vinyl chloride tube was removed and a thinner vinyl chloride tube was installed instead.
Immediately, I installed M6 to a hole of a fixed bolt head of my favorite brembo RCS master lever...
How it looks!
It looks pretty good, doesn't it?
M6 is quite usable.
View detail
From the Plating of the NORMAL, he wanted to use the Lock nut of a Handle as a Chrome, and it was changed. It does not separate, but since it has stopped firmly, there is likely to be no fear of Dropping. although it is a part whi
From the Plating of the
NORMAL, he wanted to use the Lock nut of a Handle as a Chrome
, and it was changed.
It does not separate, but since it has stopped firmly, there is likely to be no fear of
Dropping.
although it
is a part which is hard to notice -- delicate --
-- change which changed is felt.
It is recommended at a little Accent.
View detail
Since its former own car does not have a Cap in the HEXAGON Bolt which is fixing the Handlebar, either and was pleasing in Rust prevention of appearance and a Bolt hole using the black Cap, it was used also for GT1000 replaced (Plating type). On the Desi
Since its former own car does not have a Cap in the HEXAGON Bolt which is fixing the Handlebar, either and was pleasing in Rust prevention of appearance and a Bolt hole using the black Cap, it was used also for GT1000 replaced (Plating type).
On the Design of the circumference of a Handle, although the Plating type was used, if it cannot press down carefully at the time of attachment, a Plating will separate.
Since the number was mostly contained well, when several pieces went wrong, it was OK, but I considered that it was better to be businesslike with throwing away.
View detail
[Webike Monitor] Many Color variationses can also be chosen according to liking. Since it is the foundations which are exchanged for a new thing once it removes [ ], if it is this price, I will think that a Cost performance is high.
[Webike Monitor] Many
Color variationses can also be chosen according to liking.
Since it is the foundations which are exchanged for a new thing once it removes [
], if it is this price, I will think that a Cost performance is high.
View detail
The object for 10 mm of opposite neighborhoods and a Black are purchased. It is a dressing cover put on hexagon-head-bolt head. The product itself is touch called reasonably priced Quality kana. attachment is easy only by inserting in. Al
The object for 10 mm of opposite neighborhoods and a Black are purchased.
It is a dressing cover put on
hexagon-head-bolt head.
The
product itself is touch called reasonably priced Quality kana.
attachment is easy only by inserting in.
Although it was able to attach firmly, I think that troubles are suffered when removing conversely.
By entering
three piece, I think that disposable feeling may be used since it is this price.
-- The kana which the way of entering even number merely tended to buy ...
-- it is whether it is also good to buy it too much and to place some as a reserve.
-- there is gloss too much individually -- it is -- it said -- I am glad, if it feels, and it comes out and I also have a lusterless VERSION put on the market.
View detail
It purchased to the cover of the number anchor bolt. Although a silver deep pool is visible to the black of a goods photograph, thing is in the state of full black. It is thought that the number mounting part became full black and became tight.
It purchased to the cover of the number anchor bolt.
Although a silver deep pool is visible to the black of a goods photograph, thing is in the state of full black.
It is thought that the number mounting part became full black and became tight.
Black & plating is recommended.
View detail
Although MONO in which the bali remains is mixed, he has no problem, if it attaches so that it may not be conspicuous. Since plating can be done finely, we can recommend you.
Although MONO in which the bali remains is mixed, he has no problem, if it attaches so that it may not be conspicuous.
Since plating can be done finely, we can recommend you.
View detail
It is used for the bolt cap of the handle post of SR400. The whole quality is fairly expensive although there was a bali among 12 pieces by the probability of 20%. And this price! Since it thinks that goods whole cost performance of a daytona is h
It is used for the bolt cap of the handle post of SR400.
The whole quality is fairly expensive although there was a bali among 12 pieces by the probability of 20%.
And this price! Since it thinks that goods whole cost performance of a daytona is high, incidentally the question in HP of four stars is among that day mostly.
there are no data -- it analyzes and an answer comes to the next day.
The SUBARASHII service to customers is appreciated!
View detail
A slot is covered with water and the Steel cap bolt rusts easily. The rusty bolt heads are a slight lack and a cone, when the bolt itself adheres to. This is purchased in order to prevent it. functional -- as dress-up parts -- necessity -- eno
A slot is covered with water and the Steel cap bolt rusts easily.
The rusty bolt heads are a slight lack and a cone, when the bolt itself adheres to.
This is purchased in order to prevent it.
functional -- as dress-up parts -- necessity -- enough.
I think that the price has also balanced.
View detail
It was used having inserted in the hexagon socket of a number securing bolt. It is the common cap made of resin. Although I think that I will be noticed if the photograph of description of item is often seen, the bali has appeared in the product.
It was used having inserted in the hexagon socket of a number securing bolt.
It is the common cap made of resin.
Although I think that I will be noticed if the photograph of description of item is often seen, the bali has appeared in the product.
If a bali is carried out in the inconspicuous direction and attached since plating will separate and resin will become unreserved if it tries to remove a bali, I will think that it is good.
Since the plating of the product itself is solid uniform, it will look like metal only by glancing.
If not noticed by even the bali, even if it sees thoroughly, it is visible only to metal.
If hexagon socket head cap screws are such things and are closed since scale is attached to hole parts or it rusts, does a motorcycle appear finely?
View detail
It is used for the bolt hole parts of the handle post of a zoomer (ruckus). Parts for hiding the hole of a socket bolt as the name suggests. Those of black and plating with two kind and a price are also cheap. The thing itself has a plastic co
It is used for the bolt hole parts of the handle post of a zoomer (ruckus).
Parts for hiding the hole of a socket bolt as the name suggests.
Those of black and plating with two kind and a price are also cheap.
The thing itself has a plastic coated, and if it uses a slotted screwdriver etc. when removing, but power is put in poor, it is simply missing.
It may be better to see to a throwing-away grade.
more than it -- this much -- also coming out -- the impression from which the circumference of a handle became a sharp.
Since there is nothing also at the place removed so repeatedly, I think kana with the value more than a price.
In the direction called ! to hide a hole anyhow, it is recommended ^^
View detail