Reviews
It would be nice to have a Type without Luster.
[How is it used?
TZr250R (3XV) I was concerned about the bare cap bolt on the Stem of the "Stem" so I bought it to put a lid on it.
I thought about using KITACOConvenienceParts, but I chose HURRICANE because it is a PRO around the handlebar and there were more of them.
Was the one you received as per Image?
1Quantity firmly as shown in the picture:It was 1 Set of 2pcs.
Was the installation difficult?
It can be installed in about 3 seconds as it just fits into the Bolt's head.
How was your experience with it?
As you can see in the photo, it is quite shiny, so it stands out a bit. (Lol)
Well, it can't be helped that it is probably intended for use in the bar Handlebar Post.
I'll try to get rid of the luster by easing it off a bit when I have time.
[Included Parts:were they on?
Cap only.
The bags are of a type that cannot be sealed, so it would be nice to have a Zip lock, etc. for storage.
[Was there anything that disappointed you?
Not really!
【Review】
It prevents Bolt from rusting and dirt from accumulating.
It is good for those who use it in such areas because of its gloss.
Also, since there are quite a few caps in the box, I will use them for cap bolt in places I am interested in.
View detail
PetitCustom
PetitCustom Bolt Hole Cover for Handlebar Clamp. View detail
Shiningly glowing and looking great!
Gold color is beautiful!" and my neighbor's beautiful girl gal JK is very receptive lol!
Gold color seems to be accepted by gals… Riders who want to be accepted by gals, let's install it!
Recommendation!
View detail
It's cheap and can do dress-up, but …
Easily dress-up with no tools required! … but it fades quickly lol
I've had it for a few years… but it's cheap, so why not! LOL!
View detail
One point
The price is a little high, but it stands out and is fashionable when worn.
It is a little loose, but with some ingenuity, it is not a problem.
View detail
[AEBS] Dress Up Socket Bolt Cap
It fits well and it's good Please sell a lot I think I can use the leftover later The delivery arrived on time The packaging is strong View detail
Strength is difficult.
Looks pretty, but there is a problem with the Plastic material.
If you insert it too hard, it will chip right off.
The fit with the Hexagon Bolt hole is also not quite right.
View detail
It is good.
It is good. View detail
Z900RS SE
Some parts can be removed quickly and others can't. A little expensive. View detail
HURRICANE Hole Plug
About quality and texture - Top quality. Textured surface finish on the black plastic plug and is of a strong construction allowing removal and reinstallation if required. About the feeling of use - After I removed the belt drive guards from my Buell, the exposed mounting holes looked terrible. These hole plugs from Hurricane were a perfect solution to that problem. Products to buy together - If you are also using bar end mirrors, Hurricane offer these hole plugs in various sizes to suit the OEM mirror mount points to give your bar end mirror installation that professional finish. Difficulty of installation - Very easy to install these hole plug. Just be sure the hole is clear of any debris prior and press the plug firmly all the way in. Cost performance and comparison with other products - They are a very basic part and the price from Hurricane matches that perfectly. There are other CNC machined hole plugs available from other brands at a higher cost but for me the plastic hole plug was the best option. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If Hurricane does not have the correct size for your intended hole just go 1 size smaller and add some silastic sealant to secure it in place. View detail
For M8 is a little different?
First of all, please note that this is not a product for attaching to the hex holes of the Cap bolt. Do not blame the Manufacturer if you misunderstand the usage of this product.
I thought about what to do with the Screw holes that I had left partially visible and neglected, and remembered that there was also For M6 in the product I had bought to plug the M8 holes.
If you pick it up and compare the two, you will see that the texture of the head is different for some reason (minor change?), but the basic structure is the same. However, when you try to use them, the feel is slightly different.
The M8 for M8 is small and fits into the hole very well, whereas the M8 for M8 is not so responsive. The M8 for M8 has a head that fits tightly against the Exactly and fills the hole without gaps, making it difficult to remove, while the M8 for M8 has a slight rattle and can be removed by inserting a nail and pulling hard. I wonder if it is due to the difference in Screw Pitch.
View detail
I use it to prevent Rust in Screw holes.
I use this product to cover up the screw threads and to prevent rust. It is cheap to cover and comes off easily, so I now have a Habit to inspect it from time to time! View detail
Just put it on the existing bolt and dress-up!
This product is easy to dress-up just by putting it on the existing bolt, and it is easy to use if your Motorcycle has a black engine! View detail
It can be easily customized by simply covering it.
This product can be easily customized by simply placing it over an existing bolt. It can be used to hide rusted screws or as a Simple Waterproof alternative! View detail
For coloring around the Engine
Small but immeChainLarge Parts.
It is only a cap of M6 bolt, but I feel that the custom feeling will become even larger by setting several caps.
Gold tends to be too heavy, so I used it around the Engine area while racking my brains about this and that.
View detail
Cost-effectivenessOutclassing
We got this for the purpose of hiding the presence of Bolt, since there are many Red Mono Parts.
The problem with this type of small thing is that once you get into it, you lose the Drill. (Lol) 。
I'm sure it'll come off pretty easily." I thought it was a good idea, but it is fitted more firmly than I expected.
Just a Large size? Diameter? I felt that the NASA Type could hide the Bolt better.
View detail
For dress-up around Caliper
This is a Repeat item as I recently got into Cap Bolt Cover.
Gold is used as a color, but it would be too much like a "kudzu" if it is used all over the place, so red was chosen for this project.
It's just a Bolt cover, but it's a Bolt cover.
They say that just by fitting such a tiny object, the sense of custom increases.
However, I set the Caliper side to NASA Type, so it somehow failed. Crying 。
View detail
ImpactLarge, although not so subtle.
I ordered a Babyface Racing hook and a Silver cap bolt, which lacks a sense of unity.
Installation is done by "Giggle." It does not take much effort because all you have to do is push in the
Just be careful not to push too hard or it will float slightly.
Up close, it is obvious that Bolt is filling in the holes, but from the side, I think it gives a sense of Gold's cohesiveness. I think.
View detail
Tiny but unobtrusive.
The M10 Screw mounting hole for the Stand Hook on the Swing Arm of the ZrX1200 DAEG is not used in the future, so I installed this Hole Plug. Is it really for M10Screw because it is unexpectedly small? I thought it would work, but it fit perfectly (laughs).
Pushing and rocking so you won't get blown away. Black resin, unobtrusive and Good.
View detail
GOOD when combined with Cap Holder
I installed their Cap Holder and bought it to hide the Black Bolt head.
I was not sure about the other type, but this one is more integrated with the Holder in terms of design.
I'm not sure what to do with these items, but I'm afraid I'm going to run out of drills if I start obsessing about them. (Lol) 。
View detail