Reviews
I put it on my BMW G310GS.
Every time I buy a new vehicle, I put a MDF Rim sticker on it.
I chose Delicorol Blue 6mm because the body color of the BMW G310GS I purchased is Kayanite, Blue, Metallic.
1cm width Rim sticker could be attached, but Black border on Rim (Empty White) I decided on a width of 6mm because I thought it would give a more relaxed impression.
It took less than an hour to install, just degrease the rim and sticker with Parts Cleaner and spray a few drops of mild detergent on the rim and sticker, but even with the Guide (sold separately), if the angle is slightly different, the rim will gap from the center, so I had to be careful in positioning it at first. I had to be careful about the positioning at first.
Since the work was done in mid-May, no dryer was used, and it was left to dry naturally for one day.
The result is not perfect, but I am satisfied with the accent on the solid black Wheel.
View detail
Easy to stick!
I think the strength of the Sticker is there.
There are many colors to choose from and it is a Recommendation to One Point.
I was able to put it up without mistakes with Option's Guide.
View detail
One point Fashion
I ordered this product because I wanted Impact, although OEMWheel is Beauty in Red only.
I was able to attach the product to the wall without any installation tools. (It might have been quicker if I had them.)
The Red Wheel stood out at One point as I imagined. I am satisfied.
View detail
I purchased a Repeat.
It was already in use, but we were concerned about some noticeable stains, so we decided to purchase it again for reapplication.
We are attaching an image of the new image immediately after the reattachment.
I have tried other colors in the past, but I still like this one the best. I find the iridescent shadows reflecting the sunlight to be beautiful. Even though multiple colors are used, they are not vulgar and gaudy, and I enjoy the calm shiningly look. I feel that regardless of the season, the beautiful circle of light complements my feet and the body of the car.
Points to keep in mind when reapplying For your information, you may have already known this.
It is difficult to tell from the appearance alone, but when the old rim tape is removed, only the old adhesive is often left on the rim in the form of a tape. If this is not removed cleanly, the tape will stick or tangle in unexpected places when the new tape is applied, which will interfere with the work and make a considerable difference in the finished product. Since this product is a quintessential strong sticker, I pack it with Tissue sprayed with CRC556 to dissolve the adhesive a bit, and then wipe it clean with disinfectant Alcohol. I do not bother to wipe the Dustcloth with a new surface every once in a while. The adhesive can be wiped off cleanly by repeating the wiping process three times. After that, just follow the attached manual.
View detail
easy to stick to
I chose Green to match the color of Vista.
You can choose the width depending on the wheel.
View detail
Ideal for Wheel Refresh
I got a used with HubWheel and refresh it.
After all, Rim was a wounded codfish.
I think it is probably Original because the Rim shape was the same as that of XR250.
The OEMRim has a rounded rimSIDE, so the corners may possibly float. I thought it might float, but I decided to use 13mm because of the large area of scratches.
Rear and RimSIDE were too much trouble even for Straight. Therefore, from the beginning, degreasing, washing, wiping and drying with Parts Cleaner, and direct application with Letstry.
The rounded area of the Rim is crimped by holding it with the fingertips and stroking it.
I think it is probably Large sturdy because it doesn't float right away after 30 minutes.
If it doesn't float away when I check it later, good. If not, I'll do it with a slightly stronger Heat gun.
As expected, the scratches look as if the car window film has failed to release air.
View detail
The workmanship depends on the RimDesign.
I got a used WITH HubWheel, but it was covered in scratches, so I bought it to hide the scratches. Now I can rest assured that I will be able to deal with it as soon as I Puncture it.
The Rim was something like XR400, but I couldn't find any details. The width looks like that.
The Rim shape Guard is different from XR250 and is Flat.
Start of work
Degreased, cleaned, and sprayed with detergent water as per Instruction Manual.
Easy to apply but also easy to shift and position. But it peels off easily. The peeled off part is degreased again with Parts Cleaner, and the detergent water is wiped off and dried.
The rim scratches were a bit bumpy, but it looked beautiful. The scar is now somewhat hidden and the car looks newer.
Fashion always starts from the feet up. It is said that fashion starts from the feet up.
Tools to make your work easier
CenterJack or Center Stand
?Parts cleaner
? Dustcloth or Microfiber Cloth without fluff, or used hand towel without fabric softener
? Soft Squeegee, or wash hands with detergent and clean fingertips without oil.
Installation is recommended before scratches occur.
View detail
good quality (goods)
I put it on my car because I was feeling sad about the undercarriage, and it looks cool and I like it, but it is a GoldWheel so you can't tell unless you look closely. There are cheaper ones, but I chose MDF's because I didn't want the hassle of having to reapply them if they peeled off. View detail
easy to stick to
I put it up and it looked good and I liked it, but despite careful degreasing, some of it started peeling off after about a year. I used the MDF ones for about 3 years before I bought the new ones and they never peeled off. It was cheap, so if it lasted for a year, it would be a good thing. It's cheap, so it's possible to change it regularly. View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900
Good Accent
I put it on because I felt lonely around the wheel of my cb. There are cheaper ones, but I chose Y's Gear's reliable ones because it is a hassle to reapply them when they peel off. I don't know how durable it is yet, but the price is reasonable, so I have high expectations for it. View detail
It is cheap, but difficult to put up.
[How is it used?
I used it on my TriumphSTREET TRIPLE which I always use for street riding Main.
Was the one you received as per Image?
The moment the item arrived, it came with a machine to apply the Tape to the Rim, and this looks like it's gonna be a piece of cake! I thought, "What the heck is this?
Was the installation difficult?
However, when it came time to start work, the machine was not quite clear on how to use it, and the first meter or so failed and went into the Garbage Bin.
How was your experience with it?
After that, I could not stick it to Beauty in a perfect circle, and when I turned the Tire, I felt it rattling down.
[Was there anything that disappointed you?
In the end, it did not meet my expectations very well, so I removed it immediately.
The tape stretched well and did not wrinkle, making it very easy to apply.
However, it was very difficult to attach it to Beauty.
By the way, if you have a 17inch wheel, you can go all the way with this one product. (If you don't make any mistakes.)
View detail
My favorite Rim sticker
[How is it used?
This is my favorite product for applying Rim sticker.
It is ideal for attaching as an accent when the design underfoot is lonely.
Was the one you received as per Image?
The product was exactly as shown in the Image. You can check by changing the color on the product selection screen.
Was the installation difficult?
The separately sold Paste Gauge makes it difficult to bend when pasting and allows work to progress.
It's more efficient to have someone to hold the unattached part (because it can rub on the ground and get sand on it).
I think it is better to degrease properly before attaching (especially the rear wheel in the case of Chain).
How was your experience with it?
No signs of use due to dress-up parts. Looks cool!
[Included Parts:were they on?
Spare StickerQuantity:Set of 2pcs.
[Was there anything that disappointed you?
I have no complaints about the product.
Too bad the steps are a bit high.
Comments outside of OthersTemplate
The variety of designs, colors, and sizes is also a good point.
Double-sided tape has strong adhesive strength and is easy to apply.
The instruction manual says to wet the surface with water diluted with neutral detergent before pasting, but it was troublesome, so I just degreased the surface and sprayed water only with a mist before pasting, but no peeling has occurred so far.
The price is a little high, but I think it is worth the price.
View detail
Standard Custom
Since the impression can be changed considerably by putting it on, Recommendation is for those who want to completely change the appearance.
I can easily change the image if I want to change it or if I don't like it.
The Guide (sold separately) makes it easy to apply cleanly.
I found out later that if you work in low temperatures (single digits), it will not stick at all.
Please note that the instruction manual also states that the adhesive strength will decrease when the temperature is low.
View detail
It was metallic red.
I bought a cheap one from Rim stripe to see what it was like.
Since it was Metallic red, this is an Image of Aluminum Stickers being colored.
Since there is no Instruction Manual, I applied the paste in my own interpretation.
Cut into strips, degrease with Brakes cleaner, and start with the Wheel itself cooled.
There is no sticking, and if it should slip off, it can be quickly reattached.
The overlapping part is about 5mm, and adjusted with caution so that it is not too short. After one week's rotation, warm it up in direct sunlight or in a dryer.
As expected, there was some thick Gap, commensurate with the price. The thickness was also thin, and it would be difficult for the cord to wear if you pull it loosely across, rather than forcing the R to match.
View detail
freshness improvement
I had an opportunity to remove the wheel for various maintenance work, so I had a friend help me with the application work.
It may be difficult to apply it well without using the Paste Guide and without two people working together. It seems to be a good idea.
I am satisfied with the finished product. It adds a little freshness to an old motorcycle.
View detail
Casually add Accent to Wheel
Since the wheel color was originally Bronze, the area around the tires and wheels looked rather plain. We also had a hard time choosing a color for the rim stripe that would go well with the Bronze color. As a result, we applied Mirror Bracket's exclusive type of Silver, and it became an image like the shine of cutting rather than the accent of the color, accent of the genus Gold or Plating. It is not flashy, but I like it because it adds accent like a large person.
Paste is a dedicated Gauge, Squeegee, and soapy water (Mist spray) Anyone can apply it beautifully if they have it.
View detail
easy to stick to
The front and rear set of 18-21inchQuantity is a great deal for hiding the wound of the rim and for dress-up.:I bought the set
I degreased the parts with Parts Cleaner according to the Instruction Manual, and started applying the parts with diluted detergent water.
However, it floated right away, so I wiped it off with Tissue and applied it dry, using the Sticking Gauge that I had purchased and prepared at the same time.
The result was easier to work with and better looking.
The Sticker itself is easy to apply both in terms of firmness and thickness, so all that remains is durability.
View detail
Vulgarly gaudy
First of all, it is expensive.
Combined with the color of the Wheel, it became vulgarly gaudy. Also, the Rim was pear-shaped and peeled right off.
Adhesion appears to be weak.
View detail
No need.
Bend the product to make it look like a Rim, but use it as such.
I didn't feel the need to do so.
The point is, if you can make a nice circular shape, you can do it by hand.
I used the circular marks in Rim as a guide when pasting.
I was able to apply it by hand.
It might be useful to have such a landmark, since it should not exist in normal Rim.
However, it is a product of Level that may.
There are two types, one for 4 and 6mm and one for 10mm, so be careful when purchasing.
If you don't like to put it on, it's not expensive and you should buy it.
View detail
Yoshimura rim sticker
No doubt that the Yoshimura rims stickers can make your bike in sharp and stylish. I have been trying to make more Yoshimura products to improve my bikes on performance then , not only for good looking. View detail