Reviews
Was there a change in the shape of the Cover in response to the 23-year MODELorRecall?
The shape of the Right Side, in particular, does not fit the shape of the Right Side, but I cannot determine if this is a product error, a change from the 23-year model, or a change in response to a recall.
The gapping is within the range that can be handled by the order of screws to be installed, the procedure, and the power.
View detail
Lightness and thickness are good
[How is it used?
For defensive power up from daily use to forest roads
Was the one you received as per Image?
It is thicker and lighter than I expected.
Was the installation difficult?
Material:One of the four screw holes was installed too forcibly.
Instruction manuals are fine in Illustration only with understandable expressions.
How was your experience with it?
I personally think that Coloring to Match the Red body.
The holes at the bottom are not Drain, so of course they don't fit.
[Included Parts:were they on?
No excesses or deficiencies. If possible, I would like two Stickers for both SIDES.
[Was there anything that disappointed you?
It is not a disappointment, but it may require more power for installation as the slight distortion may have a large effect due to the firm cover to the engine.
View detail
Guard
The Size is good and it works well as a Guard. View detail
Does not break the Style of the car body
【good point】
Light
Looks sturdy.
Easy to install.
It is hard to be confused with others.
[Bad point]
The mounting holes were gapped and needed to be machined.
There is no hole for drain bolt.
Fallen leaves accumulate between the body of the vehicle and the Plate.
It could be done more cheaply.
View detail
The color matches well with the CRF300L and is pretty, which is nice, but the bolt location wasn't right so it was difficult to install.
The color matches well with the CRF300L and is pretty, which is nice, but the bolt location wasn't right so it was difficult to install.
I did some processing on the bolt location and it went in well.
I intend to purchase it again next time and am satisfied with the product.
ㅏㅁㄴㄹThis ㅓㅁㅇㄻNoreinㅁㅇI don’t know what to expect, but I don’t know where to come. ---------------------------------- The color fits well with the CRF300L, but it was good, but the bolt was not right, so it was difficult to install it. I put a little processing on the bolt position and put it in Next time, I am willing to buy again, and it is a satisfying product ㅏ ㅁㄴ ㄹ ㅓ ㅁ ㄹ ㄹ ㄻ ㄻ ㅁ Powered by Google Translator
View detail
Light and handy.
The Skid plate made by Gold genus has an overhang on the side, so we decided to use this product.
It is not a car model specific part, so a little modification and compromise is required.
As long as you understand the structure and decide where to install it, it can be simply popped on.
The oil change cuts the Strap, but if you think of it as a periodic change, there is no problem.
View detail
Monkey 125 Underguard
I ordered KITACO under guard black, but it was sold out and was not scheduled to arrive in the future, so I chose the silver color as the next best option.
I purchased it to protect the engine when driving on gravel or forest roads, and it gives me a sense of peace of mind rather than a pure car with nothing in it.
There is a space between the KITACO underguard and the engine, so we expect it to provide good engine protection in unavoidable situations. -------------------------------------------------- -------- I ordered Kitaco Under Parard Black, but it was sold out and it was a silver color selected as the next best book because it was not scheduled to come in. I bought it to protect the engine when I was driving gravel or forests, and it has a mental sense of stability rather than a pure. There is a space between KITACO Under Parguard and the engine, so we expect to protect the engine well in an inevitable situation. Powered by Google Translator
View detail
I like that it's inconspicuous.
It is so thin that you can't tell at a glance.
Frame side Screw hole modification is necessary @ M6
I thought the Manual would be fine if you read the PDF carefully.
Lightly tighten the front, then lightly tighten the back, then tighten the front again, then the back.
In the back, I tightened Bolt while pushing Plate with my knee.
View detail
Firmly Guard
It protects you from forest road attacks and unintentional falls.
Compared to the lightweight aluminum products of other companies, the ZETA is a bit heavier, but the sturdiness of the ZETA makes it a very sturdy product.
If installed as is, it will resonate with the Frame and cause it to chatter.
So, I put a hard sponge tape on the Frame contact surface.
There is also a hole on the underside for Oilfor Replacement, so you don't have to remove it every time you change the oil.
View detail
I have received it well
About quality and texture 좋아요 About the feeling of use 좋아요 Products to buy together 좋아요 Difficulty of installation 좋아요 Cost performance and comparison with other products 좋아요 View detail
Sturdy and simple design.
[How is it used?
When I switched from a SEROW225W to a used and reasonably priced SEROW250 a few years ago, I purchased these parts for mountain fun.
The Under Guard, which was standard equipment in the SEROW225 era, has become an option. After comparing Y's Gear and ZETA products, we chose this product, which is simple in form and seems to be easy to fix the board gold even in the event of a dent.
Was the one you received as per Image?
It is made of thicker aluminum than expected, and its sturdy construction betrayed me in a good way.
The product was more than Image.
Was the installation difficult?
Included Bolt & Washer4Quantity:The set is simply fastened to the bolt holes originally set in the SEROW250's underframe.
Installation alone takes only a few minutes.
How was your experience with it?
The guard coverage is wide and quite strong, and although it is prone to scratches, this is not a problem because that is what Under Guard is supposed to do.
I have deformed it many times in the past, but each time I correct it by hitting it with a gold hammer.
In Other People's Reviews. The reflected sound of the Engine is Large. However, with a little effort, the reflected sound can be reduced considerably.
[Included Parts:were they on?
Under GuardBody with Bolt and Washer 4Quantity:Set included, simple and easy to understand.
[Was there anything that disappointed you?
It is not at all, and it is not as rugged and refined as those made by Y's Gear, but it is more powerful. Forest Roads & Difficult Areas Attack! It is my personal favorite design because of its feeling.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I heard that the reflected sound of Engine etc. is strong, so in my case, it is sold at 100s etc. Gap Sponge tape is stretched on the inside of the guard to try to absorb reflected sound.
I installed it from the beginning when I purchased the product, so I don't know the difference before and after use, but I don't mind the reflected sound while driving, so I think it is effective. I think it is effective.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the name of the product tells the purpose of use, and it is hard to find a product that is easier to understand than this one. It is so easy to understand that it is hard to find a better product than this.
[Notes]
If you have replaced the pipe with an external exhaust pipe, it may interfere with the pipe depending on the type, so it may be a good idea to take countermeasures after lightly assembling the pipe temporarily in advance (it is said that the POWER BOXPipe made by SP Tadao does not interfere except for the very first lot).
[ITEMS TO BUY TOGETHER
If you are concerned about reflected sound, see above. Gap Tape made by Sponge." to try it on.
[Opinions and requests to Manufacturer
I bought a used SEROW250 that didn't have an Under Guard on it." Please continue to sell as much as possible.
View detail
I'm so satisfied
I don't know when I'm not doing underguard, but I feel really good after doing it. When driving after rain, if you see grass or sand on the underguard, the manifold is reassuring! Looking at it, it is aesthetically pleasing and has a sophisticated design, so satisfaction is high. I recommend it because it’s easy to do on your own! -------------------------------------------------- -------- I don't know when not underguard, but after doing it, I feel so good. When you drive after the rain, you can see the underguard and unite in the sand! Looking at it, it's good in aesthetic and stylish design. It is recommended that you can rest alone! Powered by Google Translator View detail
Good Speed delivery Item
Thanks for the fast delivery. Not yet installed, but the quality is strong and expected. I'll leave a comment after the installation. I will sell a lot and buy other products next time. View detail
Fits: SUZUKI 250SB, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLX250
Under Guard
Material:I had been wearing Plastic's Under Guard, but now I have more opportunities to drive on forest roads,
I purchased this Under Guard. The area to be guarded has increased from the previous one,
I am satisfied. Installation is easy.
View detail
Fits: HONDA DAX125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA SUPER CUBC125
make it stronger
takegawa scrambler exclusive guard part. The design is simple, so the fit is perfect. And It shows a tough feeling. If it's the same exhaust, I recommend it as an option. View detail
Increased security in combination with the block tieya
I want to drive lightly on forest roads with my Touring! I wanted to drive lightly on forest roads with my Touring.
As a result, it works well ?I felt that I needed the …Under Guard because of the stones bumping into it. Of course, it is a good looking product and I feel it looks good.
View detail
OEM-like Style
Although it was listed as a '21 model, it can be installed on a '23 GB350S without any problems.
The design of the guard is more OEM-like than other companies' under guards, so it does not feel like an afterthought, and the guard itself is thicker and has a wider cover range than the OEM Under Guard on India's Hynes CB350.
The oil can be replaced as it is, but since the guard is designed to avoid the area near the drain, access to the drain bolt is slightly more troublesome than when the bolt is not installed.
Although the price is a little high, the quality of the Under Guard is so high that it can be said that this is the only choice for recommendation.
View detail
1Quantity of hard work:2pc
Bolt1Quantity:I installed it with 2pcs. Is it the accuracy of the product or are Japanese people too detailed? I had a hard time installing it.
I installed the DL1000 V-STROM because I could not allow the Oil Filter of the Engine to be seen in its entirety.
View detail
WR250R Rikizo Slash guard
The installation is supposed to be car specific, but the pitch is not correct and the bolt is not bolted on. It took an hour to enlarge the long hole with a file. If you don't have the tools, you have to rely on the shop. It is a pity because of the price and thickness of the board. View detail
I like the fact that it will Guard to LINK.
It functions well enough as an Under Guard, and best of all, it even guards the LINK.
It is sufficient for Enduro race (not Hard).
No special modifications were required for installation.
View detail