Reviews
Spacer is required for Ф100 Silencer
When installed in Silencer of YOSHIMURA, about 10? Spacer is required. I think that it is because the outer diameter becomes smaller with the thickness of the Elastic band, but it was unexpected. I caught a friendly Nut and managed to install it. Although it is a little narrow compared to YOSHIMURABand, the glow of Stainless Steel is about the same, so I think it is a good item to go from Cost performance. View detail
Silencer band
Because there is no Silencer Band, I purchased this product, but it was a failure. I measured the number of pies
The Band part floated and it passed through it.
For the adjustment, we inserted a Rubber between Rubber and it went well.
View detail
kijimaKIJIMA Stainless Steel Exhaust Band
The other day, I bought an Exhaust System and squeezed this product
I bought it. Actually, I installed,
I could install without exhaust leaks.
I think that it is better to tighten it quite tight when tightening the Band.
Also, in case it becomes necessary, you must make this product
I wanted to use it.
View detail
It is said that there are parties saying - - -.
Rubber of the Silencer band cracked and it became terrible.
I did not think there was any Repair Parts, but I was surprised to see it on Webike!
It is a certain thing.
Size was measured, so it does not change at all from what I was with. Durability will be verified in the future.
However, I feel Length is incomplete.
In my case, because it was a Twin silencer Quantity : It was necessary for 2pc, but 1 pc was not enough for Cover eventually the same thing as Quantity : I bought 2pc.
View detail
Exclusive goods
I think that exclusive items are best as well. There was something of the same size, but when you look at it together, there is a slight gap. I think that it is firmer than the cheap and thin one. View detail
Exchange from Super trap's OEMBand
It is an exchange from OEMBand of Super trap.
The reason is that Bolt of OEMBand is Inch size.
Since the approximate value is 11 mm, it was tightened with 11 mm Box wrench, but workability is bad
Since the quality of Band itself was also questionable, I made it to Band of KIJIMA.
Improve quality by reducing the width of two sides to millimeters. It is tightened to Smooth. I'm glad I bought it.
By the way, painting Thread compound makes Smooth and rust prevention.
Other companies also have similar cheap Band, but because the board around Large Bolt is omitted
I am a cigar. If you tighten it strongly, distort the Pipe
We do not recommend as there is a possibility.
View detail
It looks like a percentage of what it looks like ...
Well, I am solid, but it will break ...
Even if it is Rubber mount, it breaks.
I broke up and bought and bought about 6 pieces for buying.
Finally Material : Stainless Steel as a product, 2. I made my own with 5 mm thick Flat bar.
Not only KIJIMA but this hand Aluminum Band is 2 mm thick, but it is a bit too thin
I think. Crack enters from the bent place and it will break.
Rib is set up.
If it is strongly good point to mention, even if it breaks, it can be used as Aluminum Material (Lol)
Shorten it to Fork band or become Bracket and send an elegant rest period
is.
Already 0. 5 I think that it will be a different evaluation if you make it thicker.
Especially if Aluminum does not have Kodawari, I would like to recommend Stainless Steel's one.
View detail
I was in trouble as Aluminum Band broke
If you use KIJIMA 's AluminumBand, it will be packed up in about a month
So I was in trouble and made this.
In Stainless Steel it was inexpensive that the deciding factor of purchase.
The thing is also the wall thickness (At least from Aluminum) It is robust..
It will not break.
Just remove the Rubber board and set it up with Aluminum silencer and galvanize and Silencer side
It became textured. If it is Stainless Steel it can be as it is,
If the other party is a heterogeneous Gold genus, it is better to use the attached Rubber board without fail.
View detail
I also stuck to Silencer fixation
It is purchased simultaneously with GP Silencer SS 2 of the same Manufacturer.
On the price side, there are many products less than half, but I tried sticking to the exclusive part.
There are only exclusive items and Fitting has no problem.
If you are cheaper 2,000 yen further, ☆ 5 what?...
It's easy to install, but it's easy to do as it is... However, depending on the car model, Tail Pipe shape, vehicle individual difference etc., it will be tightened obliquely to Silencer. (Expressions are difficult)
I own the tightening position up and down on Silencer Quantity : Pair (for Left and Right) Hitoshi etc. As I wanted to do, as shown in Pliersetc. I twisted with a little processing and installed it.
It is my own opinion this time (Please do not trust below) Band is not a part to fix Silencer Firmly.. (It is installed without a Stress, but it is Large thing) When waste pressure is applied, Spring is there, so Large is strong! (Spring for that?)
View detail
Exhaust Band of good texture
When exchanging from the OEM to the second-hand external exhaust system, since we did not have enough Exhaust Band, we installed this item.
When opening the product and taking it in my hand, I received a heavy, heavy and heavy impression. You can see that it is quite sturdy. When actually installed, I could tightly tighten it so I am satisfied with Large.
View detail
Satisfied with both quality and price
I used it when installing an external Slip-on Silencer.
Unfortunately Size did not suit, but the product itself was sturdy and texture was good.
I'd like to purchase another Size's item.
View detail
Rubber only
I think that it may be good to have the Band department, but I only used Rubber. It was loosely Well and before Silencer was running but Gap has gone. View detail
Bolt is Steel (iron) is.
Replacement as the mounting became rusty and rusty.
Exhaust System Included Parts before replacement : Same as Body, Body is SUS, Bolt is Steel.
Maintenance (Anti rust) If you do not do it probably is the same fate.
I wonder if SUSBolt can not do it ~ I'm sorry.
View detail
Just size
Purchased with GPz 750 for Other Company Exhaust System.
Since the size in the case with the Elastic band is clearly stated, I did not get lost in the selection.
It is kind explanation.
I would like to purchase other models as well.
View detail
Please do not forget
People who are considering Nasalt EvoSilencer, Included Parts : There is no so let's buy it separately. Even if you only prepare the budget Silencer, let's be careful as it gains steadily in Option Parts. Because it's a special shape, I will not buy it. View detail
Affordable
I bought CREA SCOOPY 's outside Exhaust System for changing the angle with One - off. I made my own Bracket and fixed it with this band
The price is affordable "Rib" The strength of the bent portion called also is also perfectly Stainless Steel so it can be expected to be strong against rust. ... However, each part of Rubber may need Cut.
View detail
Rubber somewhat shifts due to vibration.
It was used for Yoshimura cyclone exhaust system of SR 500. I think that it does not shift at all if it is a motorcycle with less vibration. In my SR 500 case Rubber slightly shifts due to vibration of the Exhaust System, so we corrected it. I measured the size of the Exhaust System by MAJOR before buying it. View detail
Is not this a defective product?
Purchased for fixing Slip-on Silencer of 100 φ.
I bought this cheapest item.
Some error of about 2 mm in diameter was on my mind.
However, the actual product is large enough to surpass it and it can not be said that it is very 100 φ.
Length missing from the circumference how much 15 mm.
It is too cruel..
It is probably 100 mm without an Elastic band, but it is not enough if you pinch the Elastic band.
Is not this a defective product?
I'm thinking how to fill this 15 mm.
View detail
It is an ordinary Exhaust Band
The same item was attached last time, but since it was broken by fall, I bought the same product.
Looks good or bad Material : It is Aluminum Band.
There is no luxury feeling compared to Stainless Steel, but it is also a Race ish atmosphere.
Of course, it was broken by falling, but just because the Band was scraped, there was no scratch on the Exhaust System.
Compared to Stainless Steel, this Material : Aluminum seems to have been successful by having thickness.
View detail
It is cheap but durability is a bit low
【What made you decide the purchase?】 price
【How was it actually used?】 Good, but somewhat uneasy about durability
【Was it difficult to install? (Hard parts case)】 It was easy to replace from existing Rubber.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Length adjustment carefully. Be careful not to overtight too much.
[Is there anything I was disappointed about?] durability
【Hope for Manufacturer - Please let me know if there are any improvement points】 Improve durability
【Have you compared items?】 Asia made no brand item
[Others]
OEMRubber of Stainless Steel 100 Pie Exhaust System made by Asia deteriorated and replaced.
Although there are few things to say especially because it is an exchange, we carefully adjusted the length so that it becomes Exactly to some extent
The dress is good.
Although the feeling of use is fine, there is a minute Crack in a part of the edge in 1 year of use.
It is not as good as Asia which collapsed in 2 years, but I hope I will bring it a bit more.
Is it useless because it is a harsh place where heat is also applied.
View detail