Reviews
good
It installed in 17CRF 250L. I need to drill two places, but I opened with a 5 mm diameter Drill at the Large body. Cable and others can be installed without problems as OEM. One thing that was sent to me by Bar pad is BlackRed though it was BlackWhite in the picture. Buyer can only judge on that picture, so I wanted the explanation properly. (I wanted BlackWhite - - - ) View detail
Strong Full size XG 250 TRICKER good
My Full size XG 250 TRICKER is exchanged for this Handlebar.
Renthal's TRIALHandlebar has several different heights, but Full size XG 250 TRICKER has the lowest of 4. It was recommended by Motorcycle shop that 5-inches is good.
(SEROW, Full size XG 250 TRICKER is a famous shop. )
When the height of the Handlebar was too much, it was that it was difficult for the holders to get used to turns, such as Hill climb on off-road driving.
When Klx 125 was also equipped with Renthal's Handlebar and failed at Hill climb and Motorcycle fell off the slope, the angle of the Handlebar turned GRU from Clamp and the Handlebar itself did not bend at all did.
View detail
The thing itself is wonderful
I purchased it while watching other people 's impressions, but Size, texture is quite satisfying. However, because I chose Soft Type (Soft, Full waffle. Since it was a choice from color it became Soft?) Durability may be problematic?. (Because it is pretty funnya) But even if this becomes useless it is either buying this or trying Diamond type. View detail
Classic Dress-up.
【What made you decide the purchase?】
Design was good and because it was a product that could make a coloring custom.
【How was it actually used?】
Normal handle will interfere with Cable.
[Is there anything I was disappointed about?]
Nothing in particular.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like Color Variation and Pattern to be increased.
【Have you compared items?】
Zita
[Others]
It is a classic Dress-up parts.
Because I wanted to make it Black & Gold absolutely, I painted a character part by masking it.
I was able to go to a satisfactory finish although it is a hentax..
Around lonely Handlebar, it got tight..
There seems to be some people who care about the Cost side, but it is a good Dress-up parts that anyone can satisfy.
If you get lost, there is no mistake in Renthal.
View detail
I think that it is good if running like TRIAL
I attached this TRIAL Handlebar to SEROW 225. Because it is wide, so it fits your own Quantity : Pair (for Left and Right) I made 15 mm Cut. I think that it was easy to apply weights such as Front up and it was easy to do Turn at low speed. View detail
Almost NORMAL
Handlebar riding SEROW 225 rusted and it looks bad so I replaced it with Renthal's STREETFIGHTER. After all Renthal! Pad is unbearable Parenthesis Good ?? Shape is also NORMAL and nothing complained, so this STREETFIGHTER is almost the same as NORMAL so you can ride it without feeling uncomfortable after exchanging. Actually I wanted a black color .... View detail
Understand the reasons for popularity
Many people use Renthal 's Grip around, and 701 is also officially adopted, so I think the quality is certain.
Full Diamond pattern without large protrusion, the feeling gripped because it is extremely thin is fairly thin, and the feeling of grip is high.
Because Compound is Medium, I would like to try other things.
There are many cases where a steep Throttle operation is performed in forest road driving, but since it is for TRIAL, there is no problem at all.
I think the price is cheap and the performance is also perfect.
View detail
Usual Grip
I bought it to replace Grip of TRIAL Motorcycle.
Renthal's Trial Grip has hardness of Hard - Medium - You can choose from three types of Soft.
I always chose Soft Type, but I can not think of Grip other than Renthal.
View detail
Good use of two colors
I have been using RENTHAL's Grip for over 10 years, but Waffle can get on Motorcycle with confidence even on rainy days. There is also Cushion nature, but it will be exhausted in exchange for softness. Well, since it is a consumable part, the person riding it will be exchanged for about a year, but I have been using it for about 3 years.
I want a groove of Wiring when I want greed.
View detail
Purchased with Coloring change
Originally the same thing was attached to the vehicle purchased in second hand.
Although it was Anodized of Red, I bought Black color because I faded.
I have to open the holes for fixing the Switch by myself.
Those who can process by yourself are good, but those who can not do it is Shopetc. I will ask you.
View detail
Fits: YAMAHA TTR125LW, YAMAHA TTR125LWE, HONDA CRF125F, KAWASAKI KLX110
Handlebar is still Renthal!
CRF125 (2014) Attached to. Exchange from OEM Handlebar.
Competition Dision's CRF 150 Large Handlebar for people, ProductNo is 816.
OEMHandlebar has a narrow Handlebar width, tired of being tight and tiring, but changing to Handlebar for Large people will solve the trouble so those who felt that something is not easy to get rid of, touched Handlebar replacement We recommend that you do.
Also, by combining with ZETA's 3 cm Up Bar riser (sold separately), it is easier for men of Large people and even tall people to take a posture while riding CRF 125 F.
The Bar pad that comes with Standard is also attractive.
I think that it is even better if it becomes possible to select the color of the Bar pad. Others also comes with Renthal's Sticker.
View detail
I'm glad I changed you..
As for Net information 693-01 attempted to recommend to people of height 175 cm or more with CRF 250 L.
In traveling in a forest road, unlike the OEM made of iron, Material : Vibration is moderately moderated as it is Aluminum.
The Grip position also got a little up and the stress to the wrist that I felt at the time of OEMHandlebar was also reduced.
Because it was a little up, I did not need to change the wire system.
I chose Gold for the color, but it looked better with Match with the color of Front fork.
Although it is somewhat higher than other Manufacturers, it has a bar pad and it is a reliable Manufacturer, so I think that it was good to choose Renthal.
Regarding installation, in case of CRF 250 L, I think that there is a protrusion on the Switch box and Axel part to prevent rotation, but there are also three places. The hole corresponding to it is opened in Handlebar.
Renthal's Handlebar is Aluminum, but it's thick, so electric drillletc. I think that it will become necessary.
There seems to be a method of shaving the protrusion of the switch box, but I love it and loosen the Switch box or Axel and it would hate to go round and round, so I opened a hole.
The Axel part is a part where load is always applied while driving, so I think that it is better to open only there.
Those who are planning to install themselves are the minimum conditions to have Drill.
View detail
Performance is good
I have not bought it here ...
Since I changed the Handlebar, I chose this and this rather than OEM. I think OEMGrip is perfect as durability ... Black One color has no tricks ... I bought it.
Although it was slightly higher than other things, I decided on coloring without thinking about the future.
Compared to OEM, it is soft - I feel like griping well, the operability was good.
As a disadvantage, dirt is conspicuous (I can not take it) , Wear of irregularities of Grip is fast.
Because I use it for commuting, I ride almost every day except winter, but I think that 1 Season is the usage limit. Because it is a consumable item, there is no use but there is a way for those who intensely attack Off-road and get muddy, I think that usage limit will come sooner.
View detail
RENTHALRenthal: P226 SX Bar Pad
RENTHALRenthal : P226SX Bar PadColor : Black
Appearance, installation feeling, texture, quality, all are satisfactory. It is good to make it unlike other Pakuri products in other China.
View detail
WR (X) Continue to SEROW 250 - - - (^^) /
After all, SEROW also likes the favorite RenthalKEVLAR Grip
I put it in, sorry to keep you waiting (__) m
- - - But I bought both newly properly ~!
Actually, I cheated on other Manufacturer for a while
Just like OEMTire, OEMGrip also has other Manufacturer
Grip, too, the shaving of the Rubber division is quite early too.
On that point, this product with Kevlar is strong
"soft!" It is good to say anti-nature in high dimension
I am holding it, and there is also a colorish tinge like White
My Small Shime SEROW (F19^^;) It fits
After all, it is not Grip's definitive version ♪
Although I recommend it, I do not want you to imitate it
Contradictory actions will work - I want to have a single!
View detail
Used for XTZ 125
Bar pad of Length of this Size was only in Renthal. Sponge's texture also differs from other Manufacturers in Level. It seems to be a little expensive, but if you look at the real thing, if you compare it with the Bar pad of another Manufacturer, I think that the price will be convinced.
I think that it is a really good product. By the way, I am not a Renthal owner.
View detail
The thickness is
I did this for Y's Gear because I did not have the color I wanted, but Size is too thick for wr 250 x. Limit I feel like it is installed. Therefore, I am concerned about contact with Throttle Wire, but it is Level which is manageable for some reason. It is too bad that it is Just size if it is 2 cm thinner.
View detail
Because it was old about Handlebar ...
Material is softer than what was attached when purchasing Handlebar, I thought that would last long if this. The coloring is also beautiful.
However, I think that 3000 yen is expensive, ☆ is one Minus.
I am worried about steadily bronzing it, but the beautiful Motorcycle feels good.
View detail
On crf 250 L OEM Handlebar.
I attached it to OEMHandlebar of crf 250 l. SIDE seems a bit cramped but it was installed exactly. Off-road motorcycle! It makes me feel like it and it's satisfying! I wonder if there are various colors and items. View detail
d-tracker
It is easy to operate and Cornering is fun.
Since Position is comfortable, there is sense of unity with Motorcycle.
Until now I have tried twists and turns in choosing Handlebar, but Standard is the best one
View detail