Reviews
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
Cannot be installed due to inadequate parts.
I am asking for installation instructions as soon as I buy the product, but I am not sure how to proceed.
After a few months, I haven't heard from them and can't put them on.
I took it to Motorcycle shop and they said, "Oh, we need more parts.
What about inquiries?
request a reply as soon as possible
View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
Lack of parts and cannot be installed.
Tried to bring it to Shop to have it installed, but it contains parts, Bolt that cannot be tightened and cannot be installed.
Shop told us that they are missing parts.
The Bolt that attaches the steel back plate to the Right Side to the Engine has a Bolt that does not close.
As soon as I bought it, there was no Instruction Manual and I immediately contacted them with an inquiry, but they still haven't resolved the issue!
I was forced to go to Shop to have it installed, but there were no parts that could be installed.
View detail
The finish is not so good.
I was not expecting so much from the Pivot Cover, but I bought it because I wanted to cover the Pivot hole for now.
The actual product is of foreign quality as expected.
The body is plastic, with color rings in aluminum, the surface is covered with small scratches, and the back side has BALI.
The friction of the O-ring holds the type in place, and the shallow angle makes it difficult to insert the O-ring unless it is tapped against the wood.
The design and dimensions are fine, so I put it at 4, but it is not a recommendation for those who seek the beauty of bonsai parts.
View detail
WR3 Bracket for ZX14R
I have been wanting to do a Brembo rear caliper conversion on my 2021 ZX14R for sometime now, problem was I couldn't find a company that made the conversion bracket for the caliper, I came across the WR3 bracket on Webike Japan and ordered it, it arrived in a few days to Australia, the workmanship and quality of the product is beautiful and the fit was straight forward with no problems at all, I highly recommend this product from Webike Japan. Steve Australia View detail
not sticking (e.g. to)
It won't stick unless you process it first.
Screw, Bracket, all sorts of things.
Difficult without processing technology
View detail
Fits: HONDA CBR600RR
Defective product. It was a design error. I can't believe you put this product out into the world.
Defective product. It was a design error. I can't believe you put this product out into the world.
First of all, the height of the screw receptacle for the ABS speed sensor does not match the OEM. I had to prepare a 5mm collar by myself to install it.
Also, when I tighten up the shaft to the specified torque, I can hear the set screw of the blanket and the speed sensor pulsar rubbing against each other. The OEM blanket has a 1mm protrusion on the wheel side, but this product has a flat wheel side, so I think the height is not enough.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XSR155, YAMAHA MT-15, YAMAHA XSR155, YAMAHA MT-15
The XSR155 does not come with it.
I have not checked other models, but if you want to install it on the XSR155, you will have to change the rear brake master or change the hose. Of course, there is no instruction manual for installation. View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z800, KAWASAKI ZX-25R
Ordered in 2021/October, still not here.
Ordered in 2021/October, still not here. View detail
nonconforming
I bought this to install on my Z650 '18.
There is a guarantee of conformity, but it is a non-conforming product.
In the picture, there are Z650-17UP and Ninja650-17UP, but the shaft diameter is different from ZX-25R.
There's no way it fits. (The compatibility of ZX-25R has not been confirmed yet) 。
Because I asked Motorcycle shop to install it, I missed the deadline to return it, and I am in the worst situation of losing money.
What is a conformity guarantee?
Guarantee?
If you are considering using it on a Ninja 650 or Z650, do not buy it! (Unless you have a replacement for the mounting part) 。
View detail
Perfect!
When I installed it, it wasn't sticky enough and it would lift right off, but after holding it down for a while, it stuck, and I've run it a few times and so far it's sticking!
It is Exactly because it is an exclusive product. The Logo sticker of the attachment was not put because it was a cheap feeling round!
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 250R, KAWASAKI Z250, KAWASAKI Ninja 250R, KAWASAKI Z250
If you are a webike, please contact us ASAP!
Order Number:W210915A1797
I contacted them to send me the missing product, what has happened since then?
I'm writing here because I can't press the return button and I don't know where to contact them because the return date is one month ago.
Can you send me the missing parts?
If you can't, I'll return it and ask you to return Gold.
I've been having trouble getting on for a long time.
Please contact me as soon as possible.
I've been using it for a few years now, and I've never had a problem with it.
View detail
I was satisfied
I felt that the color was a little too dark.
I am very happy with the product.
After that, I feel it is expensive in terms of cost.
View detail
I finally got the 150RR Rear Sets from Japan...
[How is it used?
I use it to run Winding.
Was the one you received as per Image?
It was not damaged and the rigidity was firm though there was some damage because it was made in foreign countries and the packing was lax.
Was the installation difficult?
Since it does not come with a single instruction manual, BrakeHydraulic Switchetc. must also be considered for purchase and installation.
Since it requires PRO-grade knowledge and skills, it is better to leave it to a specialized shop and be prepared for additional parts, but the labor cost will be high.
How was your experience with it?
The rigidity of footpeg and lever is perfect, but there are too many parts in the product.
[Included Parts:were they on?
As for the lighting of the stop-lamp, NORMAL is a limit switch, but in the case of this product, the OEM product cannot be diverted at all. It is difficult for the amateur because one instruction manual is not attached. It is dangerous for an amateur to do it by himself because it is necessary to have the skill to tweak the brake line.
[Was there anything that disappointed you?
I don't have a problem with it because I enjoy to put it on, but if you are a novice who can't tinker with motorcycle, you should leave it to a professional shop or don't buy it. However, I am satisfied with the quality of the product.
Other items that would be helpful
I think it was made in Malaysia, but the Instruction Manual should be included. Also, how to handle the stop-lamp should be advertised in advance.
View detail
You'll have to wait two months.
I ordered it on October 2 and it's been postponed twice and will be November 25. Maybe it will be postponed again? I suggest you don't order it here, buy it elsewhere! You won't get it! View detail
Fits: YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15, YAMAHA XSR155, YAMAHA V-IXION, YAMAHA MT-15
Cannot be installed→No support
Bolt is too long to install.
I reported it in detail. "Checking with Manufacturer." The last time I heard from
I haven't heard from him in two weeks.
When installed, the screw holes in the engine block will be crushed.
Be careful
View detail