Reviews
Beta titanium bolt (custom-made) TIDC-08025+ANO-MB (* maziora blue processing addition) (M8x1.25PxL30) was purchased. It was exchanged to bolt at the stay part of the back step. Although black painted processing was done by iron, since an original bolt ha
Beta titanium bolt (custom-made) TIDC-08025+ANO-MB (* maziora blue processing addition) (M8x1.25PxL30) was purchased. It was exchanged to bolt at the stay part of the back step. Although black painted processing was done by iron, since an original bolt has a possibility of rust generating somehow and maintenance seems hard, it was changed into the titanium bolt not rusting. The appearance is conspicuous by adding maziora blue processing. In general in addition, I had no maziora blue processing, but the color of titanium is surely a stainless material color, and is seldom conspicuous. Therefore, I was able to purchase by the estimate of custom-made product. I recommend to take an estimate. It is recommended. View detail
Beta Titanium Cap-bolt TISC-08050-B (M8x1.25PxL50) was purchased. The Bolt of the Step portion of the Back step was exchanged. The Bolt from the first was a Cap bolt of STAINLESS-STEEL material. Compared with the Stainles
Beta Titanium Cap-bolt
TISC-08050-B (M8x1.25PxL50) was purchased.
The Bolt of the Step portion of the
Back step was exchanged.
The Bolt from the first was a Cap bolt of STAINLESS-STEEL material.
Compared with the
Stainless bolt and a Titanium bolt, intensity is different.
In addition, Maziora-blue processing has a deep meaning, although appearance is good.
It gnaws and is prevented.
Since it is
, it is a recommended article.
View detail
It was used for F disk rotor anchor bolt. beta CHITANIAMU is 5 g in two. Since it is 12 per set, it is 30 g. A pure bolt is 90 g at one set. It is light in an authentic positive one being unexpected. It is this price because of only 60
It was used for F disk rotor anchor bolt.
beta CHITANIAMU is 5 g in two.
Since it is 12 per set, it is 30 g.
A pure bolt is 90 g at one set.
It is light in an authentic positive one being unexpected.
It is this price because of only 60-g weight saving.
It is slightly high.
But I think that it is worth investing by the smartness of appearance rather than a weight saving.
View detail
[Webike monitor] It is Mr. beta TITANIUM's elegance truly. Even if it combines with the titanium bolt of the company's products, probably because it is very accurate, an O ring gears to a smooth dramatically. Although it is weak as an important sl
[Webike monitor] It is Mr. beta TITANIUM's elegance truly.
Even if it combines with the titanium bolt of the company's products, probably because it is very accurate, an O ring gears to a smooth dramatically.
Although it is weak as an important slack stop function compared with the usual plate type, I think that it has achieved enough as a function.
(@M10 which is hardness to the extent that it can fasten somehow by hand) compared with the nut of a type, it is usually a great difference! I think that this should be used for a place with uneasiness by all means -- whichever it uses [ 笙ェ, however ], it is in notes -- as -- increase -- a bundle -- it is indispensable -
View detail
betaTITANIUM beta titanium Changed part of this titanium bolt It is a rear sprocket anchor bolt. M10x25mm 6 bolt size is greatly. so that there are many usage numbers It becomes lightweight and is operative size. By beautiful result of betaTITANIUM be
betaTITANIUM beta titanium Changed part of this titanium bolt It is a rear sprocket anchor bolt. M10x25mm 6 bolt size is greatly. so that there are many usage numbers It becomes lightweight and is operative size.
By beautiful result of betaTITANIUM beta titanium bolt, a nut turns very smoothly and it enters. It is about [ pleasant ].
Moreover, the bottom load of a spring was able to be made light.
View detail
Since there was an exactly good size by the product made from betaTitanium when looking for the flange bolt, since he wanted to use an under bracket bolt as titanium, it purchased. if compared with the goods of the other company -- the head of a bolt
Since there was an exactly good size by the product made from betaTitanium when looking for the flange bolt, since he wanted to use an under bracket bolt as titanium, it purchased.
if compared with the goods of the other company -- the head of a bolt -- a one size -- since it is small, it has been made more to the light weight.
Since it is hex form unlike the other company although meat omission of the hexagon-head portion is carried out, even if it licks the head which is a bolt should, it can loosen by a hexagon wrench! I think that they are the goods which were very rich in functional beauty.
View detail
Light beauty, high intensity. The benefit is unfathomable although the unit price is the big-ticket as special parts. Since it can be anyway used any number of times even if it changes. It is an excellent piece to use for the circumference of
Light beauty, high intensity.
The benefit is unfathomable although the unit price is the big-ticket as special parts.
Since it can be anyway used any number of times even if it changes.
It is an excellent piece to use for the circumference of a brake, or the circumference of suspension very much.
View detail
It used for the caliper of ST250, and the securing bolt of caliper support. This bolt was purchased in order to reduce the increase of weight by having exchanged for the caliper of the brembo. I think that the weight saving was carried out since i
It used for the caliper of ST250, and the securing bolt of caliper support.
This bolt was purchased in order to reduce the increase of weight by having exchanged for the caliper of the brembo.
I think that the weight saving was carried out since it was the weight below half of the bolt of normal.
Since the surface is finished finely, brightness is beautifully pleasing.
Screw accuracy is good and it can be due by light power just before this bundle.
Since there is no gaiety of appearance, if it asks for change of appearance, and that by which surface preparation was carried out to blue is purchased, I will think that it is good.
View detail
I think that utilizing for the further upgradability the genius which was excellent in the bolt using the raw material made from 64 titanium alloys or the nut, and demonstrating the effect fully makes machine performance sublimate. Is the fuel capacit
I think that utilizing for the further upgradability the genius which was excellent in the bolt using the raw material made from 64 titanium alloys or the nut, and demonstrating the effect fully makes machine performance sublimate.
Is the fuel capacity of the super cub 110 slight? It becomes 4.3 liters.
The par fuel consumption in the riding in our super cub 110 becomes [ l. ] like the following in 55 km /.
4.3x In 55 = 236.5 our riding, if the super cub 110 is made full oil supply, it will be said that the run below 236.5 km is possible about.
In the specifications of the super cub 110 by a honda, specific fuel consumption (km/l.) = 63.5km(60-km/h constant ground run test value) It is stated.
The super cub 110 will have the engine performance with it which can run 273.05 km to the run from full oil supply.
At our riding, it is the travel performance below 236.5 km.
The specifications by a honda are the travel performance of 273.05 km.
it was that the difference clear-comes out, there is and has noticed that 36.55-km or more thing travel performance is inferior to the specifications by a honda at the time of the second full oil supply of the super cub 110.
.
.
And the custom plan was simultaneously established by our super cub 110.
They are the specifications which the honda described. It became a proposition of customization of the super cub 110 how specific fuel consumption is made to resemble.
MONO on which it kept an eye as their being indispensable parts on that occasion is the product made from beta titanium, a titanium alloy, M8, a flange nut (#TIFN-08), and 4pcs.
It comes to be alike.
The small fellow was made to use as a conclusion nut of the driven sprocket (rear sprocket) of the super cub 110.
It is said that the weight saving of the individual (parts) to rotate has about 10~15 times [ of the weight saving of a state of rest ] effect.
not saying -- a thing -- if parts are replaced to above-mentioned M8 and flange nut, though it is more than equivalent as it is pure, 40% or more of weight saving can secure rigidity by a state of rest!!! Of course, when carrying out fastening to this, an important point screw lock becomes indispensable.
Engine performance which approximates the super cub 110 to face value is aimed at!!! The proposition which we planned to the super cub 110 is 250 km in travel performance in full oil supply.
(Reservation of the travel performance which enables achievement of the fuel consumption of 58.2 km/l!!!)
View detail
It was used for the front fork bottom bolt. Although it thought that the front became hard immediately after exchange, it changed moderation to recognition that the front improved the well, gradually. Instead, the uncertainness of RIYA has been fe
It was used for the front fork bottom bolt.
Although it thought that the front became hard immediately after exchange, it changed moderation to recognition that the front improved the well, gradually.
Instead, the uncertainness of RIYA has been felt.
next, you have to replace the bottom bolt of RIYA with 64 titanium -- if you get hooked ! since is high -- a wallet -- such -- !!!. if a price is considered although a thing is *5 -- *4 -- I'm sorry.
He gets hooked fearful these days on 64 titanium bolts!!!
View detail
As for the size of the front fork bottom bolt of W650, M8x35 is two. It is a cap bolt and M8x35 is two. This is a stock state of W650. The raw material was changed into the titanium alloy for this iron bolt. Whichever it chooses [ of anodi
As for the size of the front fork bottom bolt of W650, M8x35 is two.
It is a cap bolt and M8x35 is two.
This is a stock state of W650.
The raw material was changed into the titanium alloy for this iron bolt.
Whichever it chooses [ of anodizing or a standard (base finishing) ] by a user's hobbies and diversions, the cheapest product is a product made from beta titanium with the bolt of the titanium alloy material of this size.
Although the conversion situation was detailed in the picture, at the same time as it was able to obtain quite looks, the fun ride was also obtained by the ability to have obtained rigidity and elasticity.
Although the power of the axle shaft made from a titanium alloy did not know, possibly it was approached slightly.
.
.
In the case of W650, it is conversion of two mere bolts, but this is remarkable power.
.
.
When stress is added to the fronts at the time of braking and revolution, etc., road surface information mention feels it direct.
Result.
The characteristics of being easy to perceive turbulence of an action will induce linear riding, raising the straight line stability of W650.
The first purpose of the bolt conversion to this part is improvement in a safety margin.
There are metrization and improvement in appearance as the secondary element.
Honesty.
.
.
The conversion to the titanium-alloy bolt of the bottom bolt of a front fork is effective TSU!! In the case of W650, it completes by bolt conversion of two cap bolts of leaving M8x35.
the conversion to only two titanium-alloy bolts opens the door to a fun ride!! HONTOTSU!! it is uncanny -- ~!! Firm maintenance is supported and a front axle shaft,
Though the turbulence of the power of the stress added at the time of braking and revolution is controlled, disturbance is missed with the elasticity which obtained the spring element.
The above engine performance is titanium alloying of a bottom bolt.
For the time being, it is conversion of the bolt made from a titanium alloy of M8x35.
TSU these two bolts are effective truly!! Rather than saying that it is remarkable.
.
.
TSU which is recommendation in a solidly!!! Postscript.
If appearance further wants to improve and it will pad using the product made from a kitaco, and M8 spacer (M8 and outside-diameter phi13 mm-H=5mm), it is certain that the bolt with which anodizing was performed is conspicuous!! Please choose M8x40 (TISC-08040-B) for a bolt in that case.
View detail
It is blue although it is used for a bicycle! It is glamorous! Accuracy is uncanny more than it!! The bolt settled finely is pleasant ^o^.
It is blue although it is used for a bicycle! It is glamorous! Accuracy is uncanny more than it!! The bolt settled finely is pleasant ^o^. View detail
[M8x28mm P1.25] is used for concluding a front fork and caliper support. [M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad. In using it around a brake, 6 hole wiring
[M8x28mm P1.25] is used for concluding a front fork and caliper support.
[M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad.
In using it around a brake, 6 hole wiring hole processing (per one 945 (including tax)) was performed by the addition so that it might loosen and could stop and do in a wire lock.
Meat omission by the side of head circles is a hexagon socket, a hexagon wrench can also work now, the choice of a tool can spread, and the compact flange hexagon head bolt made from beta Titanium can raise working efficiency now depending on a place.
Processing accuracy is high and chamfering is performed also to the quite fine portion, and most cutting traces cannot be seen but it has become a very beautiful result.
The charge of a tool is also dramatically good and can apply torque firmly.
Since it is a product made from a titanium alloy, of course, it is dramatically lightweight, and it is that weight [ like ] which is like a product made from a plastic sensuously.
Ti-6A.I. Artificial Intelligence-4V of an alpha-beta alloy is adopted as a titanium raw material, and reinforcement, ductility, and toughness are high.
Since the drill hole for wire-locking also used the securing bolt of a caliper and caliper support as the bolt head with the type which has been opened in the whole surface (six holes), the wire lock of the slack stop was given, respectively.
Since metal cutting is performed one by one after pressing a raw material, the titanium bolt is carrying out very sharp and beautiful modeling, and fills a feeling of possession.
Since the reinforcement of a bolt is high, the fastening rigidity of each part also improves, and it becomes a weight saving although it is tens of g.
Since it excels also in corrosion resistance, a point strong against the dirt by many years past also serves as merit.
Only one point.
A dramatically expensive thing is a demerit.
View detail
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two. Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm. We are treating the straight cap bolt made from beta titanium (anodizing) now. .
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two.
Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm.
We are treating the straight cap bolt made from beta titanium (anodizing) now.
.
.
.
In rare cases.
.
.
To a change of air.
.
.
Transformation of the pinch bolt is enjoyed.
.
.
The flange outside diameter of a bolt head is phi16mm like [ the compact flange hexagon head bolt made from beta titanium ] a cap bolt.
The hexagon-head opposite side is 12 mm.
Furthermore, the design of the two-step style which can also use an 8-mm hex wrench for the hollow of a bolt head becomes a delightful bolt.
Although the product here is a bolt of the design which becomes a two-step style of an inner hexagon head and an outside hexagon head, when using it as a pinch bolt of W650, it will be concluded using an inner hexagon head rather than conclusion using 12 mm of opposite sides of an outside hexagon head.
In that case, the hex wrench which is not in the best pole ball is needed.
The best hex wrench which can be purchased in Webike becomes a hezagonal wrench stick of made in Mytho Roy, the product made from PB, or the product made from TONE.
Furthermore, if it says, L shape hezagonal wrench stick with a ball point will become the optimal.
To the sentence end.
.
.
Decoration parts with larger impact of the improvement in appearance than a function!! Although it may be considered so,
As a matter of fact, road surface flattery nature and dumping become a linear by concluding cfc TOSASU firmly, and a degree of comfort, handling, and breaking are also parts which change to a direct impression.
although KATACHI of a bolt and the manufacturer of a bolt are an individual's liking -- conversion of a pinch bolt -- honesty -- it is effective -- ~.
View detail
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt. (1): M10x65 made from a tachyon. (2): M10x70+ made from bright logic Duralumin washer made
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt.
(1): M10x65 made from a tachyon.
(2): M10x70+ made from bright logic Duralumin washer made from a tachyon (phi22mm).
(3): M10x70+ made from beta titanium Titanium washer made from a tachyon (phi22mm).
It is because I was pleasant for the reason for having tried many things to have had a difference of appearance in each in the bolt of a stand hook slider.
[Appearance of (3) may be the smartest after all.
.
.
As a place which attaches a stand hook slider to]W650, the place which we chose is a mount portion of rear suspension.
There are three advantages which treat the parts here.
chain - Chain cover - driven sprocket - Swing arm - Rear suspension etc. -- it is because a role of a protector (bumper) can be expected!! And,
There is also an auxiliary role of the step of a tandem rider and, moreover, there is also a role of the improvement in appearance!! However, equip with the stand hook slider made from an antlion (M10), and by bolt exchange of that,
Since honesty and surprised !! place are a place and a place where stress is added also functionally, that the atmosphere of appearance changes so far thinks that a titanium-alloy bolt is suitable!! Although the product name here is a radial caliper mount bolt,
Such usage also told a certain thing and performed the preparations brush.
How is Appearance of this picture??? I think that it is collected quite smartly.
.
.
Honesty and this customization are TSU which is self-praise!! If one was taken out to W650 and it has equipped with the muffler, on the motorcycle of the set muffler of rear one and 2 Sas,
TSU which is recommendation parts at the highest!! it is -- hello ~ and cool ~!! the suitable good at which it can look without getting bored -- that may be such customization -- ~!!
View detail
Since it was effective when the bolt of the brembo 4 pot casting caliper rusted immediately, it exchanged. Although the stainless was also considered, it was made the titanium about which he feels easy by calling it the circumference of a brake. (
Since it was effective when the bolt of the brembo 4 pot casting caliper rusted immediately, it exchanged.
Although the stainless was also considered, it was made the titanium about which he feels easy by calling it the circumference of a brake.
(Overspecifications ?) Since the pure bolt was a quite wretched bolt, appearance is quite good.
Since there is also still no between, the direction of rust is not known, but it will not rust, since it is titanium.
View detail
It uses for fixation of F caliper. Unless it says, other persons do not understand, but brightness also different from a stainless can be and be self-satisfied. It fastened as screw accuracy was also solid, and there was no uneasiness at the time
It uses for fixation of F caliper.
Unless it says, other persons do not understand, but brightness also different from a stainless can be and be self-satisfied.
It fastened as screw accuracy was also solid, and there was no uneasiness at the time of a lump.
View detail
Nanda? The true character of the metal body of the shape of KO of 4 mm of board thickness is a center stand stopper attached to the muffler made from a nojima for W650. Since this object is a raw material with magnetism, it becomes a raw material
Nanda?
The true character of the metal body of the shape of KO of 4 mm of board thickness is a center stand stopper attached to the muffler made from a nojima for W650.
Since this object is a raw material with magnetism, it becomes a raw material of a steel system.
Moreover, one cap bolt (M10 x 50 P=1.25) with a common bolt enclosed by the muffler made from a nojima is attached.
It was stated by the instruction manual of the nojima that a nut diverts an authentic positive one.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!!
First, polish for about 15 minutes will be carried out on the 1st, opening an aperture wide, carrying out a mask and latex gloves, relaxing to a sofa in a well-ventilated environment, and watching a tv!!
Polish for several days from the order placement to Webike to arrival.
It became BIKABIKA that there is nothing incompletely!! (2) : The aluminum spacer collar for M10 made from a kitaco (phi16mm H = 3 mm) is passed, and it is conversion to the compact flange bolt made from beta titanium (TIHC-10055-B)!!
The appearance which the fascinating blue to which anodizing was performed reflects in the center stand stopper which became BIKABIKA is glad!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and concluded in the compact flange nut made from beta titanium.
This compact flange nut is an excellent piece to the extent that it is surprised!! It groaned.
.
.
Beta titanium.
It is true!! Compact flange nut of M10 P=1.25.
A flange outside diameter is phi16mm.
A hexagon-head diagonal is 12 mm.
The height of a compact flange nut is 10 mm.
Miniaturization of a fearful like.
Therefore, the weight saving design of a fearful like.
Preeminent for accuracy!! Preeminent for appearance!! Preeminent for maintenance nature!! Feeling also becomes invigorating that there is nothing incompletely!! Postscript: In Webike,
When beta titanium products come to hand Since the sticker of beta TITANIUM was enclosed, the sticker was stuck on the center stand.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650. (1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-1005
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-10055-B),
Conversion through the aluminum spacer made from a kitaco (M10 and phi16 mm-H=3mm)!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and did conclusion by the compact flange nut made from beta titanium.
I say why the bolt of M10x55 was replaced through the aluminum spacer made from a kitaco to the center stand stopper attached to the full exhaust for W650 made from a nojima.
It is for making flush (TSURAICHI) the bearing surface which a bolt and a center stand stopper touch.
Since the bolt bottom did not touch a center stand stopper uniformly even if it inserts M10 v in a direct, the aluminum spacer was used as a washer.
Therefore, bolt length was made longer 5 mm than the thing attached to a nojima muffler.
For details, I think whether it can judge by a picture.
Equalization of sidewall is a promise of bolt conclusion.
A normal function is not obtained, either, if a bolt and a nut do not obtain a flat-surface bearing surface by Kami who ties a certain individual.
The individual which equalization of the bearing surface has not accomplished requires a spacer or a washer.
If language is added to a picture.
.
.
The flange outside diameter of a titanium bolt is 16 mm.
The outside diameter of an aluminum spacer is 16 mm.
The outside diameter of a titanium flange nut is 16 mm.
With the above-mentioned parts, normal conclusion of the center stand stopper made from a nojima is attained.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
Since mind was improved, the disk rotor bolt made from beta titanium was treated to the effect of the disk rotor bolt for kawasaki vehicles also to the address V125. Although it was a thing with GSX-R1000, 600 (K5~K7), GSX-R1300 peregrine falcon, and
Since mind was improved, the disk rotor bolt made from beta titanium was treated to the effect of the disk rotor bolt for kawasaki vehicles also to the address V125.
Although it was a thing with GSX-R1000, 600 (K5~K7), GSX-R1300 peregrine falcon, and the rotor bolt for B-KING, the address V125 has also been equipped.
A number is conversion of three.
The effect was seldom found.
.
.
Is [ low ] it operative on a scooter?
.
.
However, a blue rotor bolt suits the blue address V125 well.
Bolt head = Under phi17-mm bolt head = M10 copy = About 7-mm screw thread active length = M8 copy = About 13 mm notes: When having equipped with the rotor made from breaking, the address V125 cannot be equipped.
In the address V125, when replacing the rotor bolt made from beta titanium, in the case of a pure disk rotor, a limitation is possible.
View detail