Reviews
It's pricey, but I like Earls Gear.
There are many cheap STANDBrackets out there, but I bought this one because it is Earls Gear.
The price is high for what it is, but with the increased stability of the Side Stand and the way it looks, I'm somewhat satisfied!
View detail
I guess I could substitute something else, but it's cheaper.
[How is it used?
I use it to prevent the STAND from slipping into the ground and the motorcycle from falling over when parking on uneven ground, such as at a camping site at the end of a touring trip.
Was the one you received as per Image?
The material of the coaster is probably ABS plastic. The diameter is 160mm and the thickness is 6mm.
How was your experience with it?
It is sturdy enough to withstand even an FZS600 with a total weight of over 200 kg. There is a hole to put a string through, so it is good to hook the string to a handlebar or something to prevent it from being left behind.
[Points to note]
There are two protrusions on the top surface of the Coaster, and the STAND is inserted between the protrusions, but the distance between the protrusions is too wide, so the protrusions are not very useful. And since the top surface of the Coaster is slippery, it sometimes slides when I step on it with STAND. So I cut out a 5mm-thick rubber sheet, put it between the protrusions and fix it with superglue, and put the STAND on the rubber sheet.
How did it compare to other products?
There are products that can be used by mounting on the STAND side, but I decided against it because the ground contact area is too small and I am not sure about using it on uneven terrain.
Other items that would be helpful
Point of installation and hang:It is better to use a string through it to prevent misplacing it.
Opinion and request to Manufacturer:It would be better if the top surface of the coaster has a non-slip coating. Also, it would be better to have a bright color (White or Yellow) instead of Black, so that it would be harder to leave it on the ground.
View detail
Increased stability when parking
I purchased this to help cause my heavyweight GSX1300R HAYABUSA. It looks and feels good, and the bottom is cut at an angle for stability. Of course, there is no interference with the exhaust system. I thought it was a good stand high bracket. View detail
Fits: DUCATI SUPERSPORT 939, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER ICON, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT, DUCATI MULTISTRADA 1200 DVT S, DUCATI MONSTER 937
Parking bicycles in muddy conditions
I bought it to prevent it from tipping because the workplace where I park my bicycle is on loose ground. View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
Easy to get up.
AdventureMotorcycle tends to have deep Side Stand angles.
The Africa Twin is a heavy vehicle, and depending on where it is parked, it may take some force to raise it up.
This product raises the bottom of the STAND so that the relative STAND angle is softened and just easier to handle.
It also slightly increases the footprint of the STAND and provides a sense of security.
Great buy, a Commendation product!
View detail
Fits: KAWASAKI Z650RS, KAWASAKI Versys-X 250, KAWASAKI Z900 RS Cafe, KAWASAKI Z900 RS, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z900, KAWASAKI Versys-X 300, KAWASAKI Versys 1000, KAWASAKI Versys 1000, KAWASAKI Z650, KAWASAKI Versys 1000, KAWASAKI ZX-6R, KAWASAKI Ninja 1000 SX, KAWASAKI Versys 1000S, KAWASAKI Versys 1000SE, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Ninja1000 (Z1000SX
This will give you peace of mind.
Touring on a hot day was always on my mind.
That solves it, no more digging into the road surface!
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It's huge.
The body of the car leans a lot when STAND is applied& I bought it to try to secure the ground surface.
Installation is very easy as it only requires screw fixation while using the screw lock together.
After installation, the thickness of the Plate allows the vehicle body to stand up, and it is now possible to STAND stably even on uneven terrain.
However, it is huge.
View detail
It is still good.
This is my second purchase after CROSS CUB. It still gives me a different sense of security. View detail
Fits: YAMAHA MT-09, YAMAHA Tracer9, YAMAHA Tracer9 GT, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA Tracer 9 GT, YAMAHA Tracer 9, YAMAHA XSR900
Size is not correct.
It does not match STAND's Size.
The double-sided tape is attached to fill the gap, which I think is to fill the gap, and it is a poor spec. There are many other inexpensive products of this type on the market, but I bought this one because I trusted the brand.
I'm disappointed. 。 So far, the double-sided tape has not rattled, but there is no denying that it may do so. I know it is difficult to return the product since it has been used, but I would like you to take it back if possible.
It is a so-called disappointing product.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI Versys-X 250, KAWASAKI Z900 RS Cafe, KAWASAKI Z900 RS, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z900, KAWASAKI Versys-X 300, KAWASAKI Versys 1000, KAWASAKI Versys 1000, KAWASAKI Z650, KAWASAKI Versys 1000, KAWASAKI ZX-6R, KAWASAKI Ninja 1000 SX, KAWASAKI Versys 1000S, KAWASAKI Versys 1000SE, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Ninja1000 (Z1000SX
it's recommended
I was concerned about interference with the OEM Exhaust System, but the Large was sturdy. The slanted base also gives a sense of security in grounding. Although it looks good and is expensive, I am satisfied with Large and recommend it. View detail
Side Stand Bracket
Note the order of screw tightening. Tighten the two screws on the Motorcycle side first, then the outer Quantity:Tightening the 2pcs will attach without gaps. View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Pure, BMW R nineT Scrambler, BMW R nineT Urban G/S
Recommended by Dealer.
RnineT is made in Germany.
The side stand is shorter than that of Japanese motorcycles.
When stopping, it is a little easier to maneuver if you put on the geta because it collapses deeply.
I installed it when I took delivery of the car.
It looks a little bulky, but it is every time when the car is parked.
It is about 20mm, but may be a little convenient in a humble way.
You may also be able to find a SMART Side Stand for the 2021 RnineT.
(I don't know what year it is, but there is a SMART Side Stand on Net, not sure if it will fit a '21 or not, so I haven't gotten around to it …)
If anyone can help me understand, I would be glad to know.
View detail
Fits: DUCATI SUPERSPORT 939, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER ICON, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT, DUCATI MULTISTRADA 1200 DVT S, DUCATI MONSTER 937
To cope with soft ground
I bought this for my new MONSTER S2. I also use it for commuting to work, but some of the bike parking areas are unpaved, so I bought it as a precautionary measure.
There is nothing difficult about the work and it can be installed in a few minutes.
View detail
Feeling of security
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
Parking is now possible without worrying about the road surface.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
If you have a Center Stand, it is easy to install, but if not, you can install it while supporting the car body with your body.
View detail
Side Stand Extension
Looks great! So cool!
The OEM Product is a drill and requires drilling, so this is the one I chose.
The bank angle I was worried about was also covered from the top.
It's fixed Screw, so it's no different than NORMAL.
FLHTKSE will be Full banked.
Side Stand because the front side of the root is shaved off.
It does not matter at all if this product is installed
However, a lower price would be ◎.
At this price, a small Hexagonal Wrench for tightening screws
I thought it came with it.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
Side Stand・Extension
Installed on Z900RS.
Tighten Screw up or down, Quantity:Pair (for Left and Right) There is rattling in the
The top and bottom directions are resolved by applying 0.75mm thick Double-sided Tape.
Quantity:Pair (for Left and Right) For the direction, a 2mm-thick plastic plate was cut and inserted into the gap to stop it from rattling.
For those who can handle the above level or do not mind rattling.
View detail
Fits: BMW R1200GS Rally Premium Sport, BMW R1200GS-ADV, BMW R1200GS-ADV Premium Line, BMW R1250GS HP Premium Sports, BMW R1250GS-ADV HP Premium Line, BMW R1250GS-ADV Premium Line
This will keep you from getting stuck.
This is a standard product for BMW and the effect is outstanding. The quality is good and satisfactory. View detail
Installed to increase STAND ground contact area.
I had replaced it with Side Stand Assy until the previous vehicle, but there was a special Plate for CROSS CUB, so I installed it.:I installed it on top of 1pc. and coated it with Bond on the Bolt tip. I like the design and manufacturing. View detail
Fits: HONDA CRF250RALLY LD, HONDA CRF250RALLY, HONDA CRF250L LD, HONDA CRF250L, HONDA CRF250M
Fall prevention
When it rains and the bicycle parking lot at home is muddy, the normal stand naturally slips under the weight of the car and has fallen over.
Since then, I have buried the Block in the bicycle parking lot and parked my bicycle there.
However, I bought it because I thought it would be a bad idea to have a similar Situation outside of my home.
Now I can park my bike without worrying about location.
View detail
Solidly built and secure.
[How is it used?
Expand the footprint of the Side Stand to a larger area.
Was the one you received as per Image?
Street Image
Was the installation difficult?
If the Center Stand is set up, installation is completed with 4 Bolts.
How was your experience with it?
The side stand slightly raises the angle of the car body when parked, making it easier to raise the car body after boarding.
The installation area will be increased, so it will be possible to park stably even if the ground is somewhat soft.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I think the price is just a little high.
The construction is solid, so I can say it's worth the price in a good way.
View detail