Reviews
It attached to KSR by its original work stay. The circumference of rear one felt it refreshed and became smart. The size and the form match KSR (^^) Isn't it a grade which can be ordinarily used in brightness?
It attached to KSR by its original work stay.
The circumference of rear one felt it refreshed and became smart.
The size and the form match KSR (^^) Isn't it a grade which can be ordinarily used in brightness?
View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
Since it was an air cooled engine, it purchased for the purpose of engine durability UP and protection. honest -- change is not felt in physical feeling just because it attached this -- but UP of appearance and the sense of security was carried out ma
Since it was an air cooled engine, it purchased for the purpose of engine durability UP and protection.
honest -- change is not felt in physical feeling just because it attached this -- but UP of appearance and the sense of security was carried out markedly.
Since attachment was also easy, it was good to purchase.
View detail
The tank bag (touring mapple correspondence) suitable for SEROW 250 was looked for and purchased. 笆?if a belt is fixed to the frame on either side instead of the method of twisting around a sheet, respectively since the pipe of the frame passes right
The tank bag (touring mapple correspondence) suitable for SEROW 250 was looked for and purchased.
笆?if a belt is fixed to the frame on either side instead of the method of twisting around a sheet, respectively since the pipe of the frame passes right and left in the case of SEROW 250 although it attaches and there are two kinds of removal mounting arrangements -- perfectly .
It is not necessary to remove a sheet, and if it is as long as 2~3 minutes, it can attach.
Once it attaches a belt, removal on a destination is several seconds.
笆?It becomes in a size, and since it is compact, capacity is also restricted.
Probably, it will be better to be businesslike with the object for accessories.
Incidentally the single-lens reflex camera (with a standard lens) was settled somehow.
笆?Without removing the buckle by the side of this side at the time of oil supply, if a front magnet is removed and a bag is shifted to the sheet side, it will OK.
It is dramatically easy.
笆?The both sides of a good point tank are a few tank bags attached to a shroud type off vehicle.
The Shobunsha Publications touring mapple (the A5 version) is settled exactly.
Since it is small, it does not become the obstacle of riding by a standing position, either.
It is stable even when it is high-speed.
笆?a not quite satisfactory point (request) -- it is hard to carry out receipts and payments of a map for a while.
In order that this side side may open that the size of a bag is the limit of map size, where a motorcycle is straddled, it interferes with the body.
It is severe to take a map in and out of the waiting for a signal, etc. quickly (although it can do if it gets used --).
Moreover, since the lid portion of a main load space cannot be greatly opened even if it is a fastener full admission, receipts and payments of a load are hard to carry out it.
Into right and left or a lid portion, I also wanted the pocket to a slight degree.
Moreover, in the case of SEROW 250, it was better, when this side side also has a magnet and could be attached by four points (a buckle being assistance to the last).
As mentioned above, I think that it is a tank bag which can be used for the touring of an off vehicle on the whole although some dissatisfaction point reduced one * since there was.
He bought it and there was no loss.
View detail
Fits: SUZUKI GSX1300R (import), SUZUKI GSX1300 R ABS14-17, SUZUKI GSX1300 R
It changed to the air filter of DNA. It could blow compared with normal and stage fright became good. A suction area also has force in the inhalation sound at the time of acceleration widely. Four reasons are very so [ maintenance ].
It changed to the air filter of DNA.
It could blow compared with normal and stage fright became good.
A suction area also has force in the inhalation sound at the time of acceleration widely.
Four reasons are very so [ maintenance ].
View detail
If there were details of an accessory, he did not need to buy jets vainly. It is satisfied with quality.
If there were details of an accessory, he did not need to buy jets vainly.
It is satisfied with quality.
View detail
Where a helmet is put on a mirror by having attached this helmet lock to the handlebar, it came to be able to carry out Locke, although it was hard to use the place of the pure helmet lock bad and it was troubled. Since a hook is only stuffed into loc
Where a helmet is put on a mirror by having attached this helmet lock to the handlebar, it came to be able to carry out Locke, although it was hard to use the place of the pure helmet lock bad and it was troubled.
Since a hook is only stuffed into lock release and reverse without a key by turning a key at the time of Locke, it is easy.
Convenience receipts and payments can be carried out without a stress! Since attachment is also only shut with + driver, it is easy.
It is recommended.
View detail
It is most important that it can use even place [ narrow ]. It is large activity also at an inner dirty and narrow garage. (It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
It is most important that it can use even place [ narrow ].
It is large activity also at an inner dirty and narrow garage.
(It is quite obvious if I have a picture seen) If it gets used, use by itself can also be performed in comfort.
View detail
It purchased in order to mainly carry out torque management of an oil drain. Since the high torque value firmly fastened with delicate low torque since the measurement width is 6 to 30 cannot be measured, it cannot respond to all the numerical values
It purchased in order to mainly carry out torque management of an oil drain.
Since the high torque value firmly fastened with delicate low torque since the measurement width is 6 to 30 cannot be measured, it cannot respond to all the numerical values in a service manual.
It is a thing not too bad as user-friendliness.
View detail
Although it can remove easily, cautions are required so that it may not hurt, when reusing. Since the grip is too thin, a little thicker one can operate it safely certainly.
Although it can remove easily, cautions are required so that it may not hurt, when reusing.
Since the grip is too thin, a little thicker one can operate it safely certainly.
View detail
Since the motorcycle which has ridden is the serviceability worst, exchanging plugs also suffers troubles... When using this plug wrench, plug exchange could be performed to the smooth!! Since power can be firmly applied even if it makes it slanting, even
Since the motorcycle which has ridden is the serviceability worst, exchanging plugs also suffers troubles... When using this plug wrench, plug exchange could be performed to the smooth!! Since power can be firmly applied even if it makes it slanting, even if the circumference of a plug is confused, it can remove easily. View detail
It is compact and easy to keep it. It purchased to adjustment of valve clearance. Since it can use bending even place [ narrow ], it is good.
It is compact and easy to keep it.
It purchased to adjustment of valve clearance.
Since it can use bending even place [ narrow ], it is good.
View detail
It is used for desorption of the foil bolt of a car. Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out. It is
It is used for desorption of the foil bolt of a car.
Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out.
It is found useful when fastening a thing which will be troubled if the crack of the nut made from aluminum, etc. is attached.
Although durability is also used by two tire change (studless summer tire) + exchange [ one / brake fluid ] per year per year and is frequently dropped on the concrete of a garage, it hardly has a crack as the photograph.
Although 3/8DR is used for maintenance of a motorcycle in many cases, I make a torque wrench dock with this (1/2DR), and am using it for a fasten lump of foil.
View detail
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make. Since plating processing of comment and all is carried out, compared
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make.
Since plating processing of comment and all is carried out, compared with the KTC products of a rough form, it is dramatically beautiful at satin finish.
- Since knurling is carried out, it is easy-to-use as a skid at the time of already turning and carrying out.
- I think that it is quite strong structure since it did not fracture even if it applied quite unreasonable torque.
- A price is quite cheaper than KTC products.
Since KTC is also made now in China, since the company of the canada was making this product make from a singapore etc. by OEM, quality had uneasiness, but does it seldom change?
Rather, the quality of plating is a top all the time.
View detail
In the old vehicle, the basis of the fixed idea that a short pipe matches well, and the moriwaki short pipe were purchased. - I think that it matches well considerably as expected [ looks ]. However, since I think that there are tastes, it is each
In the old vehicle, the basis of the fixed idea that a short pipe matches well, and the moriwaki short pipe were purchased.
- I think that it matches well considerably as expected [ looks ].
However, since I think that there are tastes, it is each.
I think that the set part of an exhaust pipe something is touch good with a beauty curve.
It is anxious about the rest in whether from now on rust will come out.
- Sound idling is quite quiet.
When it turns in the state where it stopped, it is good touch to a lower sound of BUON.
But it is only pure +alpha when it runs.
If it turns to up, there will be good sound, but sound volume is a little smallish.
- The engine-performance low speed was lost faintly.
But the touch by a pure low speed which was slow in action is lost, and I feel that it becomes easy to ride on good touch.
Even Kami turns shapely truly.
However, it is slow by 6~7000 rotation.
Since its own motorcycle may be bad as for this, it is whether to become helpful.
I see synthetically and think that it is a quite good muffler.
The person who is asking for power up and sound-volume up of Bali Bali may be x.
When a cheap short pipe is low-speed SUKASUKA, or is explosive sound roaring or you try to buy the good muffler of a stainless or titanium, it is expensive.
It is the engine performance of there there and is a price of there there.
Maintaining the balance in the good meaning, I think that it is a muffler which a hand tends to take out.
View detail
For the time being, appearance was astringent and thought that a parenthesis was good. If sound is with a baffle, it will hardly change to normal. When it removes, low-pitched sound is comfortable. It is seldom the worried last sound volume.
For the time being, appearance was astringent and thought that a parenthesis was good.
If sound is with a baffle, it will hardly change to normal.
When it removes, low-pitched sound is comfortable.
It is seldom the worried last sound volume.
The sound in the first low speed of axel rotation is whether to become troublesome if it is a midnight residential street.
View detail
Since it was the bride's motorcycle, the muffler which is not so noisy was chosen. a yoshimura -- since the yoshimura was thought to CB as favorite me and the one piece of the company was attached also to the former motorcycle, the price made into thi
Since it was the bride's motorcycle, the muffler which is not so noisy was chosen.
a yoshimura -- since the yoshimura was thought to CB as favorite me and the one piece of the company was attached also to the former motorcycle, the price made into this is also cheap -- since it carries out, and it rusts immediately to a sound peculiar to steel although it is very satisfactory, management is put in order and its way is good -- coming out -- the shin.
But it is a very good muffler.
View detail
Fits: SUZUKI GSX1100S KATANA (KATANA)
Although used in about ten years, a design, sound, etc. are still satisfaction. In the automobile inspection the other day, if sound was loud, sound-volume measurement was carried out by ?, but it was completely OK. It seems that most aged deterio
Although used in about ten years, a design, sound, etc. are still satisfaction.
In the automobile inspection the other day, if sound was loud, sound-volume measurement was carried out by ?, but it was completely OK.
It seems that most aged deterioration cannot be found.
It is a yoshimura truly.
I think that it is a product about which he feels easy and which can be used for a long time since it carries out by a manufacturer also about repair.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
It is with a shortcut oil pan to the sound (at the time of an automobile inspection measurement 94db) which does not become a nuisance to the neighbors, and is the engine performance of there there. The obstructive catalyzer took the side of the vehic
It is with a shortcut oil pan to the sound (at the time of an automobile inspection measurement 94db) which does not become a nuisance to the neighbors, and is the engine performance of there there.
The obstructive catalyzer took the side of the vehicles before emission control.
since -- hollowing -- use.
An effect is a cinch (^v^)
View detail
In the future, DISK is considered. It offered in the future by using a 199-mm stainless kit and choosing drum support this time, since it was tight pocketbook. It was saved by compatible parts.
In the future, DISK is considered.
It offered in the future by using a 199-mm stainless kit and choosing drum support this time, since it was tight pocketbook.
It was saved by compatible parts.
View detail
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch. A tool and stay interfere in a design frequent also as means in the case of air-bleeding. If this point is improvable, I will think that it is better.
Since it was cheap as a set of tank stay, it purchased, but it is too rough touch.
A tool and stay interfere in a design frequent also as means in the case of air-bleeding.
If this point is improvable, I will think that it is better.
View detail