Reviews
No problems
Used for GEAROil cap, normal use. View detail
Use of different tools
This Torque is available in a variety of sizes.
You can turn even the tightest places that cannot be turned.
It also supports Torque with the middle of the Bolt sticking out.
The Band at the base of the AXIS Labs Slip-on Silencer can be turned without removing the Cowl.
View detail
I'm just saying it's easier to do without.
I used it on a Clutch Wire that had become reluctant. I'm not sure if it's a good idea, but I think it's a good idea. It's a must have for me because I'm a bit of a pain in the ass. It is a must have for me as it is very cost effective. View detail
Suitable for a wide range of sizes
It is convenient to use for a wide range of sizes for the Hose of WaterLine and Fuel line. It can be tightened firmly and can be used without worrying about liquid leakage. It is easy to tighten and loosen the Hose Band with its excellent workability. View detail
It's essential for air extraction.
This air bleeding tool is essential for the maintenance of hydraulic brakes and hydraulic clutches. It is easy to use with Oil Resistant Hose. View detail
It's easy to use, but you'll start sweating from the Hose part soon.
Purchased in conjunction to get in tune.
It was easy to use, but it makes me sweat right out of the hose area.
I'm not sure if the Hose is properly Gasoline resistant.
It's not a problem, though, because I don't use it often.
View detail
You can do without it, but it's better if you have it.
If it's 650 yen, it's convenient to have one if you buy it while you're there and get free shipping.
The Clutch Wire was cleaned with Parts cleaner, lubricated with CRC556, and finished with for CableGrease spray, and the Clutch was lightened.
View detail
Pretty solid.
It's very sturdy and strong because it's only a shock driver. The powerful torque can loosen even the hardest and most stubborn Screw. [Contents] I'm also happy with it. View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S, SUZUKI Address V125S
Poorly made.
I was relieved to install and use it as a KN project product, but
The engine stops suddenly while the car is running.
When the power went out, I checked it out.
The connection between the Cable and round terminals (Crimp) was lax and Cable was missing.
I was worried, so I checked the Crimp part of all four locations.
All of them were lax on Crimp, and when I pulled them, Cable was missing.
I fixed Crimp and used it myself.
If you are going to install it, you should check the Crimp part.
View detail
It keeps the work area clean.
There are two types of Axel warmer, one to pull and one to put back, and by all accounts there's no gap to point the Nozzle through, so I think this is now a necessity, whether it's WAKOS, CRC, or whatever it is, it's a necessity for a motorcycle that's out in the field. View detail
Used to branch the Hose
I used it because I needed to change the handling of the Hose when I replaced the Radiator-.
I used it mainly for the part of the Hose that branches out, and it has been used without any water leaks.
If I had to say, this Joint itself has a Large size, and I felt that it is quite heavy when I installed it.
View detail
Necessity of maintenance
Scooter drivetrain maintenance essentials
We can't start without it.
But it's hard to use it for anything else, the fate of specialized tools …
I think I'll use this on Sunday to trade the Weight Roller for the Belt …
View detail
I'm glad I bought it
It is used to remove the bolts that are attached to the bolts
I'm glad I was able to get it off without any problems
The details are cheap, and the material is slippery and difficult to use with bare hands or military hands
View detail
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
I can use it
Oil Measurement Acceptance Purchase
It can be used without any problems as other people have written
It also includes a memory for calculating the mixing ratio, so you can use it to make mixing oil
It seems to work
View detail
You will receive a different shape from the picture
The shape is completely different from the one in the picture, so it's useless It's the same name, but with the model change, it's changed to something completely different I'm not sure if this is a good idea or not, but it's not a bad idea If you buy this, you will lose money View detail
You will receive a different shape from the picture
Actually, the shape is completely different from the one in the photo, so it's not useful It has the same name but seems to have changed to something completely different with the Model change The shape of the blade is also completely different, so it would be a loss to use it View detail
Ideas are good, but
As a result.1pc. nor did it complete the work. the TireValve was moved directly up (vertically) I'm not going to be successful with the quality of this tool because I can't pull it If you don't increase the rigidity of the tool, there is a risk of injury from the recoil If you can increase the rigidity of the tool by yourself, you can use this Ideas tool View detail
Knkikaku
Yes, simple work can do many measurements. Yes many versions Meet the needs of people who are not comfortable to work hard. View detail
Jungle
Yes, it is easy to do many measurements, with precision, can easily find fit. Can measure cc Mm can be measured inexpensive, yes, many jobs. View detail