Reviews
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA XMAX
Popular with Tandem
【What made you decide the purchase?】
Where it can be installed cleanly on the purchased Top case
【How was it actually used?】
It is popular among my daughter that the back does not hurt even in light clothes in summer
【Mounting was difficult?】
Since the specified hole opening position is already shown on the top case side, in my case I drilled a hole with a woodworking cone and just attached it with the included Screw. Very easy.
【Please tell me the installation point and hang】
As it seems like Material to lick Screw Mountain, Screw should not over tighten
[Is there anything I was disappointed about?]
Urethane department is also solid, so no particular
【Hope for Manufacturer - Please let me know if you have any improvement points]
I am happy that you can make it a little cheaper
I think that it may be possible to have Set sales already installed like GIVI
【Have you compared items?】
Top case type of GIVI
[Others]
Rider itself has no benefit, but it is recommended for those who have the opportunity to tandem
View detail
GiviOutBackTop Installed in case
I bought it for Tandem. It was easy to install because it is mounted with Double-sided Tape. But I'm worried if I can peel off.
A little more, as long as the price is cheap!
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
To B 47
It is hard to understand in the photograph but attached Backrest to B 47.
I was surprised to see that it was soft and different from what I saw.
Drill with holes according to the attached pattern paper and stop with Screw. Easy if you have a tool.
View detail
Bargains from other Manufacturer.
To install TANAX's Tool Bag and Spec. I purchased it for change. It is favorite to say that the bar is not too high just 1 inch with the same thickness as Handlebar.
Black painted Luster also has a sense of quality. The only disappointment was that the adhesive at the moment of fixing the end cap of the bar was easily removed. So I fixed it with a strong adhesive of Soft Type.
In my case, because it is the purpose of installing the Tool Bag, I do not attach the rest pad like a picture.
I think that it is hard to attach to the car body because the bar is unitary but it is inexpensive and inexpensive compared to other Manufacturer's items so it is recommended for those who are considering purchasing Backrest.
View detail
Backrest installation
It is easy to install anyone because it just places the hole of 6φ together with the hinge on the outside of the V47Top case and the position of the attached paper on the bottom of the top cover..
We also recommend the thickness of Backrest just right..
View detail
A little sense of security to Tandem
【What made you decide the purchase?】 Reliability of Yamaha Brand and reassurance at Tandem
【How was it actually used?】 Even if you do not put a person behind it will not collapse like Design.
【Was it difficult to install? (Hard parts case)】 Any item
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
[Is there anything I was disappointed about?] There was not so much Size as big as Large
【Hope for Manufacturer - Please let me know if there are any improvement points; I like the shape with this, but I think that it is still better if there is another design
【Have you compared items?】 nothing special
[Others] I did not think about this item when I bought CYGNUS, but I bought it after buying it as saying that I want a child. As a result, it became a good product to buy.
View detail
It was a product better than expected
I bought it with V47. I attached the mount for drilling and installed immediately, but I could Drill without Gap at all. It is safe to secure the mount firmly and keep the four corners at SEROWTape. I do not hesitate to recommend Drill to the first cow. I used Screw lock in consideration of loosening by vibration.
I'd like to give my daughter as fast as possible.
View detail
Custom made ◎
Manufacturer by saying that there are few stocks
I was worried, but daring to buy
Correct answer, I have a lot of Tandem runs
Foot is floating from footpeg during acceleration
I felt that I was driving in front
After installation we can drive safely
It seems to be comfortable
I am satisfied with the appearance.
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
It sounds softer
I bought it because it is said to be compatible with B 37. Installation can be done easily according to the instruction manual. It is softer than I thought it was a touch feeling, so it seems to be appreciated by those who are Tandem. I think that there is better than there is none at all.. View detail
Installation is super simple
Just fix it with 4 Bolt to the Side Arm fixed to the car body.
There is a feeling of security with firmness, and feeling Fit with the car body is also an OEM feeling.
☆ has 4 because I wanted Bolt to use Black to make it unremarkable.
View detail
If it is a bit cheaper
It is for E450. Case opens easily because it is Plastic, hole processing is essential.
When I got my daughter the other day, it was because Box hit my back and it hurts so I thought it was expensive but I bought it.
If you install, cut off the mount written in Italy, paste it on Case and open a hole from over it OK.
Diameter is M6. It was 5, but when I tried to grab the M6, it fitted without problem.
Screw Because I could not see the hole, I thought I was going to get over it, but I was relieved to go straight in unexpectedly.
(About 15 minutes in the whole process)
I will think that the back did not hurt, that it was easier and that the investment effect was effective.
I will have VANVAN active during the transfer from now.
View detail
Quite tricky to install but manageable. An added comfort for the pillion. Be sure to check your pillion once a while as he/she might sleep back there.
Quite tricky to install but manageable. An added comfort for the pillion. Be sure to check your pillion once a while as he/she might sleep back there. View detail
![PCX125 Backrest Kit [Type2].](https://global.webike-cdn.net/images/reviews/757/00001000757L.jpg)
Fits: HONDA PCX150 ABS, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125 HYBRID, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Fixing was ez as A B C,all equipted could b used as a back rest and also a rear luggage box bracket.Multi-purpose and very rigged!
Fixing was ez as A B C,all equipted could b used as a back rest and also a rear luggage box bracket.Multi-purpose and very rigged! View detail
It has attached to GIVI V46 by BMW R1100R. If there are even tools, such as an electric drill, since the paper pattern is also contained, it can attach without it taking 30 minutes. -- me -- intentional -- directions -- some of phons -- it attached
It has attached to GIVI V46 by BMW R1100R.
If there are even tools, such as an electric drill, since the paper pattern is also contained, it can attach without it taking 30 minutes.
-- me -- intentional -- directions -- some of phons -- it attached downward.
It is because he wanted to unite with the Line of a lid.
the position which is equivalent to the back depending on the mounting angle of a Trunk is delicate -- かもしれませ -- if ~ backseat is specification, I get Aikata to come and consider that it is [ a feeling of a Fit ] higher to decide a position by on-site doubling.
View detail
[Webike Monitor] At the time of the Tandem touring, it attached so that a Passenger might not get tired. In order to be unable to say anything since oneself cannot feel, but for human being who rode on back to say, if there is nothing wh
[Webike Monitor]
At the time of the
Tandem touring, it attached so that a Passenger might not get tired.
In order to be unable to say anything since
oneself cannot feel, but for human being who rode on
back to say, if there is nothing when it is, I will think in general that there was an effect as expected by if very well different at the unexpected time.
If those for whom anything does not have a tool about
attachment since a drilling process is required do not make
preparations but it purchases, or will not be found very much just for a moment.
View detail
[ -- the Webike Monitor ] -- that which the way which existed says although you may not be. SPI Logo does not stick. It is disappointed only there.
[ -- the Webike Monitor ]
-- that which the way which existed says although you may not be.
SPI Logo does not stick.
It is disappointed only there.
View detail
Although you may not be, it is that which the way which existed says. SPI Logo does not stick. It is disappointing only there.
Although you may not be, it is that which the way which existed says.
SPI Logo does not stick.
It is disappointing only there.
View detail
Fits: その他 E68, その他 E36NJ, その他 E45NJ
E45 was renewed. When a backrest is attached to a top case, the motorcycle looks a tourer immediately. It seemed that it was not disreputable for tandemers, either. However, it is somewhat expensive..
E45 was renewed. When a backrest is attached to a top case, the motorcycle looks a tourer immediately. It seemed that it was not disreputable for tandemers, either. However, it is somewhat expensive.. View detail
Since the paper pattern is also attached, drilling is also easy. The comment of tan DEMA are also very best.
Since the paper pattern is also attached, drilling is also easy.
The comment of tan DEMA are also very best.
View detail
When a tandem was carried out, even a little Kon had a crevice between the back and a box. It is the favor of this backrest and is crevice dissolution. It seems that it becomes possible to also give the waiting for a signal, and it became quite ea
When a tandem was carried out, even a little Kon had a crevice between the back and a box.
It is the favor of this backrest and is crevice dissolution.
It seems that it becomes possible to also give the waiting for a signal, and it became quite easy (^o^) Although attachment requires a drilling process, since the location in which a hole is made is put in an instruction manual, if it is used, a hole site arrangement is easy.
(^_^). It gets bored with making a hole immediately with an electric drill.
I made the hole with the drill of the one size down from instruction manual specification.
the direction opened at least in this size -- yes, it is touch.
(*^_^*). However, there is waiting for arrival of goods and it may be kept waiting so long.
View detail