Reviews
I installed it in ninja 1000
M8Bolt size ones with ninja1000's Tandem Footpeg
It attached to the root.
As impressions change only by attaching, I think that it is perfect as a handy one point decoration.
I thought that it was easier to install as it was easier to install, but after mounting it ran about 15000 km but still remains without falling out.
It can be recommended as a handy decoration.
View detail
Easy Dress-up
Easy to install, it will be a little Dress-up. However, other people are also saying, but I can not deny the sense of overcrowding. Also, let's order the size carefully. I arrived a little smaller than I thought. Although it installed in a place different from the schedule, well it is feeling that it is good with that.
View detail
Quality has Rose
I attached it because the head of Bolt of Uniqlo plating color is noticeable when Pannier caseMount is attached.
Some things do not fit unless they have to be pushed strongly with your fingers "Scauper" And there was something felt lightly, I felt quality with Rose. It is an impression that it seems that it is just getting off by vibration.
400 yen is too expensive for the four pieces of Plastic like this!
View detail
Unnecessary Screw filling up
I removed the Left Side Mirror for commuting Scooter as it gets in the way because it slips through the traffic jam, but I tried using it for filling in the remaining M8Screw hole. It has a burr and is plugged into the Screw mountain when inserting it so that it can not be taken easily. I think that it is very convenient because it helps to protect Screw holes which are no longer used.
However, it is slightly troublesome as the head is Small when you remove it.
View detail
Fits: HARLEY-DAVIDSON Sportster Family, HARLEY-DAVIDSON softail family, HARLEY-DAVIDSON dynamo delta, HARLEY-DAVIDSON Touring Family
At One Point
I installed it on the poster and can install easily, I think that it is quite good as One point but I feel better if the price is a bit cheaper. View detail
LevelUp
Although I was concerned about purchasing the same POSHLicense Plate HolderSet for MT-09 before, I was wondering what it would be like Cost in 4 cups, but I made a purchase this time. I feel a sense of unity with mounting Cap. View detail
PoshCap Bolt Cover
PoshCap Bolt CoverChampagne gold
Satisfied with Cost performance.
Purchase for Bolt's Rust prevention.
Good for one point.
Recommendation.
View detail
Cap Bolt Cover
PoshCap Bolt Cover
Water accumulated in Bolt and purchased for preventing Rust
Champagne gold is very beautiful and satisfied.
Cost performance is also a good recommendation.
View detail
Ideal for blindfold!
Tail and Blinker are integrated, so there was a hole not used when exchanging with regular Blinker, I was concerned.
I searched for good blindfold at home center etc, but it was hard to find and was in trouble.
If you are browsing Webike happen to find it immediately purchase!
Of course it was a good blindfold at Just fit.
View detail
Preliminary purchase.
Stock got lost, so I bought it. I think that it is more durable than the thing of the plaque, so this Bolt cover is all Material : I am wearing Aluminum stuff. When installing, RubberRing is hard and does not fit exactly, so I attach a little Silicon grease. View detail
I wonder if I can fly by vibration
Cap of Handlebar Post of GSX - S1000 flew by vibration, so I bought this, but if inside diameter is a bit bigger Large, I can firmly insert it, but I feel a little loose.
I wish I could not fly again ....
View detail
I like Motorcycle - - -
As well as getting on Motorcycle, I like Large as well as many things to tamper with, I often search for Big's Custom Part. We have noticed this BottleCover- when we are searching variously to purchase Number-plate Holder from Wei Big.
If you attach a Number - plate Holder, this too - - And it clicked.
It is a small part, but it became a part that I can not afford to Custom customers. In addition to M6, there seems to be M8 and M10, so I'd like to install it as needed in the future.
View detail
It is for postage adjustment....
It can be used something so shipping fee adjustment (Lol)
Although it is quite expensive compared to adjustment
It becomes a habit to use with Cap Holder and Set of the company
Is it okay, or, is it a decorative
If you dare say something good
Handlebar Clampetc. Against iron cap bolt
If it is attached, rust by aging can be prevented somewhat
Is it raining a little in that hole?
Is it about?.
Although it is a fashion, it is certainly just a lid so it's expensive
There is Image.
Even when you take a suspension on Cap bolt of the suspension (How fast is the highway cruising speed?) I think that I am doing it firmly because it is not removed.
View detail
I do not know.
Although it is before opening it has scratches like the view.
Worth 1,000 yen in 4 cases - - - How is that?
Bolgarage's Bolt cap is enough.
View detail
It is necessary for American!
After tightening Cap bolt with Hexagonal it rusted and it looked awful and it looked bad, but if it is attached, it will be shiny.
Cospa is also good so please do it again.
View detail
To prevent rust
I am on the XL 1200 C SPORTSTER 1200 883 N but I feel that rust is easier to raise than domestically. Rain water is Bolt (Hex) Purchase as soon as it gets stuck in the hole of. View detail
Beautifully Dress-up Iron Bolt like Mizukura
We bought it for mounting around Bolt around handlebar which is easy to see when riding in Motorcycle and around Engine which can not be Stainless bolt strength strongly.
【What made you decide the purchase?】
The Engine 's Mount Bolt is made of steel and it looks shabby, but Chromoly and Titanium' s Bolt is expensive, and if you exchange it easily to Bolt of Stainless Steel, it will cause corrosion due to the potential difference and it is uneasy in the strength part of the beginning I tried it because there is, I found this item and tried it for trial.
【How was it actually used?】
Material to Cover : Since Rubber's O-ring is installed, it will be fixed to the extent that there is no worry of falling off even when it is attached, and also when pulling out it will also snap off simply by lightly pulling the fingernail and plugging it.
【Please tell me the installation point and hang】
Although it may feel unexpectedly when Cover is inserted, it is no problem even if putting it without hesing because it fits off finger nails easily when removing it.
[Is there anything I was disappointed about?]
nothing special.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It's a bit expensive so it's more than the current price / I think that it is easy to align if it is about 3.
【Have you compared items?】
nothing special.
[Others]
I thought that it was a halibote until I installed it, but I think it seems that luxury feeling has increased somehow when I installed it.
Especially since inexpensive Motorcycle like MT-09 I often stick Bolt kind, I recommend Bolt cover like this.
View detail
KITACOConveniencePartsK-CONBolt cover (For 12 mm across flats)
Using this KITACOConveniencePartsK-CON Bolt cover, you will be transformed into a high class for your own Motorcycle to be misplaced.
This KITACOConvenience Parts K-CON Bolt cover 1 pc. Because the price of stuff is not an idiot, so if you install it a number it may be natural to become pretty (Lol)
This KITACOConvenience Parts K-CON Bolt cover (For 12 mm across flats) Is 1 pc. It is about 70 yen per price, but if you try hard on the Bolt heads of various parts of Motorcycle and try harder it will be better for Parenthesis to be worth the effort.
This KITACOConvenience Parts K-CON Bolt cover (For 12 mm across flats) In addition to 10 mm for opposite side and 14 mm for opposite side, we also need to work hard..
When you decorate your Motorcycle with this KITACOConveniencePartsK-CON Bolt cover, it will be very Parenthesis as I mentioned above, but after about a year and a half we will be faded by ultraviolet degradation and deterioration will proceed We will recommend that you exchange it with a new KITACOConvenience Parts K-CON Bolt cover before becoming poorly odorous.
Also, if you would like to install this KITACOConveniencePartsK-CON Bolt cover at the beginning of Bolt, which will be turned frequently, add this KITACOConveniencePartsK-CON Bolt cover to Bolt's head 2 / If you put it down to about 3 it will be easy to remove and turn the bottom Bolt.
I, this KITACOConveniencePartsK-CON Bolt cover to Bolt 2 / It has never been lost or dropped just by covering 3. Please do not worry.
As this KITACOConveniencePartsK - CON Bolt cover is ideal to update at once every about a year and a half, I will use this KITACOConveniencePartsK - CON Bolt cover so that it will be free shipping every time you shop with Webike. I make up for the price and try to buy it little by little.
However, this KITACOConveniencePartsK-CON Bolt cover does not reach the footsteps of Bolt who was given an Anodized Treatment, and we are not good at installing it to the place where Engine or heat rises.
With regard to its installation location, after running on Motorcycle for about 10 minutes after hanging on the Engine, if you touch Bolt with your fingertips and Bolt at a place where the temperature is not burned even if it is hot it is almost like installing this KITACOConveniencePartsK-CON Bolt cover Large I'm strong..
(Please note burns when checking. )
.
View detail
★ ★ ★ Bolt On Decoration Late ☆ ★ ★
【What made you decide the purchase?】
Among products similar to Bolt decoration covers on the market, Bolt cover of this KITACOConvenience Parts is the product with the highest quality and easy to use, so I bought it.
【How was it actually used?】
If you attach it to the Bolt to be decorated it will be as beautiful as you can make it as if you were decoding late.
【Mounting was difficult?】
Since it is only covering the target Bolt head like Cap, installation
It's very easy and it's not hard at all.
【Please tell me the installation point and hang】
If you can put it straight in parallel to the Bolt head of the target, it enters straightforwardly, but if Cap is oblique at the time of entering it is hard and it is hard to enter, please put it straight correctly before it breaks.
[Is there anything I was disappointed about?]
It is not a story to be disappointed, but it is not strong for ultraviolet rays and direct sunlight, but it is weak.
Although it is not expected to be naturally cracked indeed, it is exposed to direct sunlight, ultraviolet rays and wind and rain, the color naturally disappears and the underlying white comes out.
【Hope for Manufacturer - Please let me know if you have any improvement points]
If you cover and cover the Bolt to be decorated, you can fit firmly to the back, but if you try to remove Cap for turning Bolt it will crack at such times.
Also, because it fades due to direct sunlight, ultraviolet rays and wind and rain, we want to replace the fading terrible Cap.
In order to do so, we always have more than one inventory per Size, so if you can lower the selling price as much as possible, we are more thankful that it is easier to keep it.
【Have you compared items?】
I considered exchanging each Bolt with Bolt of Anodized Finishing, but considering maintaining the strength of the joint, I think that this KITACOConveniencePartsBolt cover is a reasonable and appropriate Decoration Rate Items.
[Others]
Bolt Each one of these heads is covered with this KITACOConveniencePartsBolt cover, but it takes a lot of numbers, but this KITACOConveniencePartsBolt cover has three types, 10mm for opposite sides, 12mm for 14mm and so on, so I / 12mm / Only 14 mm Bolt heads are decoration late using this KITACOConvenience PartsBolt cover.
.
View detail
Trivial Custom ♪
I attached Green Light's Cap to the Bolt that is mounting the Handlebar according to the car body color!
Originally Bolt here had no Cap, so we used to protect Bolt and dress up - - -
I think that the price is a little expensive, but I do not have any other complaints other than that.
View detail