Reviews
Caliper support
DAYTONACaliper support Normal. View detail
Fits: KAWASAKI NINJA 250
Mounted on EX250L
It is for the current NINJA, but the thickness is 7mm different from the previous EX250L (1pc.) and OEM, but it went on relatively easily.
I have only done a 40km test run around town with the old Crab installed, but there doesn't seem to be any problems.
I think the thickness increases the strength of the product.
Things are good.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R
Low price, but not bad.
Brake PadsThe outer circumference needs to be shaved a little less than 2mm, but much better than OVER's 4mm.
The construction is more delicate than the OVER ones, but there seems to be no problem.
View detail
Fits: KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Why so much?
It is good that it can be mounted on either the top or bottom, and it is well made, but it is disappointing that you have to shave 4mm off the circumference of the Brake Pads, so MinusPoint View detail
Fits: Others for Φ30 Fork
for Brembo
I was worried about installing a Brembo caliper, but decided to buy this one.
I wanted to buy Black, but there seemed to be no sales? I wanted to buy the Black one, but there seemed to be no sales, so I bought the Silver one.
It does not look bad. The included Stainless taper bolt is a nice touch.
View detail
Fits: SUZUKI address V125, SUZUKI address V125
For Big rotor
Install the OEMCaliper support by biting it between the OEMCaliper support and the Fork.
The following dedicated Bolts were purchased and used at the same time
https://www.webike.net/sd/21346412/
View detail
Almost for MT-10
It is for YZF-R1, but it cannot be used with Normal wheel, not because of the Support, but because the Caliper contacts the Wheel, so even if you use other Supports, you cannot install 2 pot Caliper except some. 。 The MT-10 Wheel, which is almost the same model, does not have Wheel fins like the R1, so it is likely that the Normal wheel can also be used. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000
Rear brembo conversion
2/3 the price of those made by AGRAS
Unless you are very particular, ACTIVE is the best choice.
The texture is Black Anodized, which matches the color of the Swing Arm without any discomfort.
View detail
Fits: SUZUKI Address V125SS, SUZUKI Address V125S, SUZUKI Address V125G, SUZUKI address V125
Bracket for 200mm discs at an affordable price
Any concerns, cautions, or advice when purchasing
오차없이 정확히 징칙 가능 좋아요
----------------------------------------------------------
Any Concerns, Cautions, or Advice when purchasing
It is good to be accurately without error.
Powered by Google Translator
View detail
Fits: KAWASAKI Z125 PRO
For Crab type Brembo installation
The front brake was not working well, so we decided to replace the brake caliper.
Should I use a KITACO single push 2-pod or a Crab type Brembo? After much deliberation, I decided to go with the Crab type Brembo. For this reason, I purchased this Caliper support. I am satisfied with the Caliper support because I was able to install it without any problems and the brake works well now.
View detail
Fits: HONDA Rebel 500, HONDA Rebel 300, HONDA Rebel 500, HONDA Rebel 300
ABS error.
I bought it from a private importer before WEBIKE handled it.
The ABSSensor warning light always comes on around the 100 km/h mark.
It seems that the ABSSensor mounting position is gapped enough to be visually confirmed.
I ended up replacing it with OverRACING's (or rather waiting for it because I was on a production waiting list and couldn't get it) and the problem went away.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
For Z900RS
To install brembo new Crab on Z900RS.
This was the only supersupport available until a short time ago.
The price is relatively high.
The air can not be vented as it is when it is subscripted, so it is necessary to use Fashion.
Downward is not dignified, and the Hose will be longer.
It can also face downward.
4 stars because it is expensive.
View detail
Fits: SUZUKI GSX-R1000
Easy to use
The Instruction Manual said that colors were available, but the one that came was not, and when I contacted Active, I was relieved to be told that the new one did not have any colors. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM
Might have to change.
I purchased this for the installation of the front disc on the over
So far, I've been wearing Takegawa supports.
Before attaching, I checked the actual car and found that there was no clearance.
I bought it because I thought I would have to change the support....
The thing itself is a beautiful Black with 4 bolts included.
I was able to install the disk without any problems.
View detail
Fits: SUZUKI GSX 750 S 2, SUZUKI GSX1000 S, SUZUKI GSX1100 S
Is it because it is used in conjunction with an external Wheel?
Used to install brembo 84mm Caliper in combination with GALE SPEED TypeN.
I am not sure if the problem is on the Wheel side or on the Caliper support side, but I needed a 2mm shim to get the Caliper center out, which was better than having to minusOffset the Caliper, but I think it would not be possible to use this with the OEM Swing Arm and Brake. I think it would be no good to put only this Caliper support in the OEM Wheel if it is used with the Wheel that can be used with the OEM Swing Arm and Brake.
The Caliper support itself is built reasonably well, but it is not recommended for those who cannot arrange for the production of color and shim, or who cannot come up with the means to deal with and reconcile them unless everything is done perfectly with Bolt On.
Fortunately, the pad location matched Rotor, but basically the product is not worth the price.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA YZF-R25
Does not fit the former yzf-r25 with upright Fork.
Bolt of Caliper support interferes with OEMfloater.
It is not possible to cover the back of the Support with a washer as per the Support installation instructions.
The images in the Instruction Manual are also too small and white-black, which is the worst because it is hard to understand.
I will repurchase per Large person and OverRACING.
If you have been able to install it, or if you have the correct method, I would be grateful to know.
View detail
Fits: YAMAHA YZF-R15, YAMAHA XABRE, YAMAHA XSR155, YAMAHA V-IXION R155, YAMAHA MT-15
This is for 320mm Rotor.
It was for 320mm, but the Rotor I chose interfered with the Caliper. I had to shave off the part where it hit.
To begin with, the XSR155 Big rotor is not available without importing it, so you need to be prepared for a lot of things.
The details are on YouTube. We hope you find it useful.
https://youtu.be/myATZbuZZe8
View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM
OVER×SUNSTAR Support for Brake Disc
4,5mm thick OVER×SUNSTAR] Exclusive for Brake Disc
It will be brembo4podSupport.
And it is for JC61-75! JC92 is not available!
Please note that it is usually easy to make a mistake with Support for Rotor.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100
When installing the Brembo caliper
I purchased this product to install a Brembo caliper.
I was able to install it without any problems and am satisfied with the quality and shape of Anodized.
The color was Black to match Caliper.
View detail
Fits: YAMAHA FZR750R, SUZUKI GSF1200S, SUZUKI GSX1300R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SF, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI GSX-R400R, SUZUKI RGV250Γ, SUZUKI RF900R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GS1200SS, SUZUKI BANDIT400
To install Brembo caliper
I bought this to install a brembo 40?Pitch caliper.
The texture and precision are perfect.
Black to match Front fork and Caliper.
View detail