Reviews
good-looking
Color-coded by Size, it is easy to find the Size you need when working.
The high strength and precision of the Torque allows the Torque to be applied firmly without tampering.
The price is high, but well worth it.
View detail
Easy to use
The tip is sharp, and a light tap is all that is needed to firmly attach the mark.
If the Mark is shifted, the Drill hole will also be Large.
This product is very accurate and helpful.
Once you buy one, you won't be replacing it.
It is better to buy a good one from the beginning.
I can recommend this product.
View detail
watchman
I always buy this product.
It's expensive, but the tip is sturdy and fits the screw.
Very easy to use
We do have some thicker Grip products.
The force is easily applied when tightening, which can lead to overtorque.
I like this one just as much as the other one, which can be tightened just fine.
Grip has a distinctive smell, so tastes vary.
View detail
If you are looking for Caliper Overhaul, this is the 1 pc
There are many kinds of this kind of pick tool, but I think this form is the easiest to use for Caliper's Overhaul.
Scauper quickly into the Seal groove, twist to flip the Seal, then pull it out and you're done.
If you are working hard with Precision Driver and others, please Recommend this.
I think it's worth more than the price.
However, I think it's a bit pricey.
View detail
Just fit
I bought this for my Carburetor Pilot Jet.
It was Just fit on a Mikuni BS34 Pilot Jet.
The tip of the blade is Straight to some extent, so it can reach the bottom of the Jet.
There is a slight rattle when turning, but I don't think the Jet will chip or anything.
It would be perfect if the thickness of the cutting edge was another 0.1?
The width is Exactly.
View detail
Expected
The hardness, the bite, it's great.
I have a preference, but I'm the first of this kind of Bit.
Some people may think it's too hard and will damage the Bolt, but I use it with the softer Snap on depending on the application.
View detail
I bought it to adjust my glasses. I love it!
I bought it to tighten up my little Screw from Glasses.
I love it, I've never bought anything else from PB products.
This is the only way I can tell, but the common Chinese DriverKit looseness is not here, as it should be.
View detail
It's marked for electric power!
It can be used as an extension of the Bit although it is for electric power.
Originally, it should be aligned with Driver, but it's aligned with Bit and the length is not enough. I recommend it when.
However, it's a bit wobbly because it's spliced in.
View detail
Good accuracy
It is Firmly in the shape of a star with precision.
Because the appearance is also Colorful, and it is hard to rust, I think that the cost performance is better than buying a bad Bit. It is.
However, the first purchase Cost is high
Also, it's not compatible with the Bolt for theft response because Ana is not available.
View detail
PB is good
It doesn't have that distinctive PB smell!
If you use a lot of blades with one Grip, you can get a lot of blades
It can be changed into various drivers
View detail
Grip and Quantity:Set
Replacement Swiss Grip Screwdriver Handle and Quantity:I bought it as a set
I had to use a bit, so this will be a driver
Bit is cheaper than buying a bunch of Blade's
View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
Easy to use
The best and easiest to use Bit holder.
If it is a BitSingle Item, it will roll over, so the Holder and Quantity:I bought it as a set
There are a couple of them in the toolbox.
View detail
For automotive tools
Carry Bit and CompactRatchet for on-board tools
I'm using this one from Bit holder
The difficulty is that Hold is a little loose, so Bit comes out easily
View detail
When you get used to it, you can distinguish size by color
This is handy!
When you get used to it, you can distinguish the size by color, so the work efficiency went up Also, it simply makes the look of Garage more gorgeous
However, the color itself is a paint job, so it will come off after years of use Even if you treat it roughly, it doesn't peel off so much, so it may be excellent
View detail
Ease of use as expected.
Purchased for Carburetor OH. Satisfied with ease of use as expected.
There is only high, it is also convincing that it is expensive.
However, this Driver's Blade is a Taper type, not a Type with a famous step.
Type with a step is "Swiss grip" It is Type.
View detail
Hickory handle is easy to grasp.
Head diameter 22? Head length 75? Full length 270? Mass 167 g and Small, but it will be useful if you work in a small place. Previously, I used Praghan of Orange made by Snap on from total plastic, but it broke with ParaPara while I was not aware and became unusable and I fell in love with this Hickory handle and bought it. View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I think that Bit of PB is good construction.
I like PB's Drivers, so this time I purchased only PB's Bit. I would like to make every driver I own own PB! "There are quite a lot of PB products that Webike can not purchase." So, if you can improve, I am grateful... View detail