Reviews
The best
This is good!
It's easy to install, and also looks good!
It is okay not to introduce it to my friends
However, Rubber is too thick to use as a Washer.
Whether you buy a new one, you do not have to worry about it
Float stone
View detail
Truly Nojima build is good. I'm glad I bought it.
As a slip-on silencer it is expensive, but the texture of Silencer and Bracket, this build will make this price cheaper.
I think that the car body installation is also exactly, colors are also very suitable for the car body.
When Titanium's burned color is attached, further upscale feeling will be up..
I also tried other Slip-on Silencer, but Blinker melted due to exhaust heat despite being a Fender Eliminator. This Exhaust System has an exhaust port at a position where exhaust is hard to interfere with Blinker, so you can use it with confidence without worrying about it.
Japanese Vehicle Inspection Correspondence is Idemitsu Idling When I think about it is as quiet as OEMExhaust System and it is helpful to think about your neighborhood.
As you turn it will sound good as it is. I heard the suction noise of the super charger I felt it just fine volume.
View detail
I am satisfied with Large change.
Existing Exhaust System is overkill, so I replaced it quickly.
The manual is easy to understand, and I installed it myself.
Since Gasket can not be diverted, it is better to order it together when purchasing the Exhaust System.
It is a feeling that sound is like this because of.
Design is Psycho ー.
View detail
Very good.
I use it with NojimasTitanium full exhaust installed in CB1300SC40.
User For approaching noise checking at the vehicle inspection, I was a little worried, so I went to the User vehicle inspection at this Baffle.
The result was 92 db and was quite acceptable as the volume was suppressed considerably.
Although the sound quality did not change, I was able to suppress the volume considerably.
Large satisfaction with good shopping.
Things I do not have in other ShoppingSites and OEM Parts Number are available, so I am thankful for Large change.
I would like to continue using it.
View detail
Sound with luxury feeling and tone, Sense of good Large people Sound
I was wearing BEOT's Slip-on Silencer, but I was concerned about Mischief sound and chose NOJIMA. The sound is good and the appearance and the material also like luxury and I like it. View detail
I feel Volume.
Volume I wanted to make a feeling and purchased it. It will be Wet Carbon. Installation is easy, but OEMBolt needs to be replaced. Fashion It is highly productive. Depending on individuals, there may be some gaps, but I think every product is such a thing. I feel that Parts is warping a little bit about it. So I think that shock durability is a concern, but because it looks good it was good to purchase. View detail
I feel Volume.
I purchased it because I wanted Volume feeling around the Front of DAEG. Material : I purchased Carbon.
Carbon is Wet Carbon. Although it is basic Bolt-on, it may get Gap depending on some individuals. Fortunately for me it fits. Although Bolt needs to divert OEM and change places, installation is very easy. The point which is worrisome is where the Parts are warped when fixing, so it becomes a matter of concern whether it will be broken by something impact. Parts that are more fashionable than performance but I think that it was good to purchase.
View detail
The appearance will be tightened much more
【What made you decide the purchase?】 Because the body was black, it was not too loud, not too quiet, with NojimaDLCTitanium being the most ideal in appearance, and because it was Sale.
【How was it actually used?】 It looks better.. Also, compared with OEMExhaust System, it is lighter so it is easier to handle Motorcycle. There are individual differences in sound, but maybe it does not cause annoyance to neighborhood?
【Was it difficult to install? (Hard parts case)】 Although it is not difficult, I had a hard time to remove the OEM (Lol)
【Please tell me the point of installation and hang (in the case of Hard parts)】 Although it is Slip-on Silencer, the tool is not cheap. (Lol)
[Is there anything I was disappointed about?] It is not for now. Parenthesis better than I expected!
【Hope for Manufacturer - Please tell me if there are any improvement points】 Price is a bit ... a bit more ... (Lol)
【Have you compared items?】 BEET, Earls Gear, YOSHIMURA
[Others] It was a good shopping.
* Optional items can be filled in as much as possible
View detail
It is the most suitable Exhaust System for DAEG
First, if you compare the weight with the removed Normal muffler, is it about half?
Titanium is a bit lighter, but with Stainless Steel this is enough.
Assembly was also easy because the quality accuracy is also certain.
VOLUME is also not much different with NORMAL and enough car inspection will be Large durable.
It is because I wanted to wear this Megaphone Type Exhaust System if I decided to purchase DAEG.
Even though other companies have Megaphone Type, Nojima's best is Parenthesis.
View detail
Good quality
Spring strength also has no problems, appearance is also Stainless and good. It purchased this time due to the issue of free length, but there is no problem at all compared with other companies! View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX14R, KAWASAKI ZZR1400, KAWASAKI ZX14R
Exhaust System Required for Center Stand after replacement
I think that it was from other places, but I think that it was the most simple.
I am exchanging the Exhaust System with Slip-on Silencer, and I also use Center Stand, so I am using it.
It is a small part that I can not notice unless I say it, but I think there is enough value to put on it.
View detail
If it is the 14R's Full Exhaust System it is determined by this!
I decided to worry about 3 months or so.
Other companies also have Full Exhaust System at Japanese Vehicle Inspection Correspondence, but it seems that this is the best in Pipe diameter, volume.
(There seems to be some people who do not pass because the volume is due to vehicle inspection Limit - - - )
I did it by myself but it took about an hour and a half from the place to remove Cowl to the completion.
I do not understand performance honestly.
However, the result measured by Dynamo - - -
NORMAL → 187PS
Nojima → 195 PS
became.
Because Motorcycle has Power, you may not need to worry too much.
As a result, appearance, Sound was good and I recommend it!
View detail
Packaging box was sturdy and dampening material was generous. Every part was individually wrapped. Fit and finish were top quality. No problem at all at installation, because precision was very high. Sound was deep low bass, really love it! Louder than
Packaging box was sturdy and dampening material was generous. Every part was individually wrapped. Fit and finish were top quality. No problem at all at installation, because precision was very high. Sound was deep low bass, really love it! Louder than stock, but not annoying. Did not need any carburetor adjustment at all. View detail
Smoke Screen
Since Nojima's Exhaust System is attached, I want a unified feeling of Aftermarket parts manufacturers and Screen purchased Nojima
I think that Simple design is selling anyway rather than saying that this screen is windshield effect.
So it may be unsuitable for people looking for Other Company Product in search of Large Screen than OEM. I feel a bit smaller than the OEM.
It's Recommendation for those who like it because it looks Cool!
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03
It is an Exhaust System that reliably powers up with a quiet Sound.
【What made you decide the purchase?】
At first glance it seems to be flashy but it matches exactly when you install Design & Coloring.
【How was it actually used?】
PowerUPUP throughout the region and lacking in the singing phrase of Manufacturer called 3 horsepower UP at Peak time.
The valley of Torque near 6,500 rpm of NORMAL is also resolved and it blows up to Beauty from the bottom to the top.
【Was it difficult to install? (Hard parts case)】
Once you do hypothesis once on the whole it is not that difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Spring hook is mandatory. Spring is quite hard so Radio pliersetc. Do not substitute with.
Always replace OEM Gasket recommended by Manufacturer.
[Is there anything I was disappointed about?]
The sound is a little too quiet. Especially when Idling is almost the same as NORMAL.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Picture of Instruction Manual is a little sloppy and hard to see.
【Have you compared items?】
I got lost as SP Tadao but I decided Nojima at Silencer's Line & Graphic.
[Others]
I feel the sound quiet a little, but it is easy to get on without getting tired, the power also rises and I am extremely satisfied.
View detail
To MAJESTYS リ ア ARA's Silencer
In Baffle attached to Re-ARA's Full Exhaust System, PassPass and noise are mixed, I bought it because I disliked it.
In NojimaBaffle, since the inside of Baffle is made up of a long Pipe, Passaph noise peculiar to Baffle has disappeared. I am satisfied.. Also the inner diameter is about 30 π, so it is thick, so coming out is not too bad. Still it sounds silent and is good.
★ Because it feels that the price is high ★ There are four evaluations.
View detail
Good quality
Punching part is 5 mm and wall thickness is 1. It seems to be 0 or more.
Welding of Punching and Body is also well done.
Punching is molded into a Ball shape but the material is beautiful without deformation. A beautiful paper of Pipe is attached and overall
I have a long-lasting feeling. There is no silent effect. I feel it sounds softening things. Can not create your own
View detail
It was good to sell!
When installing Silencer of Universal, intermediate Pipe connecting Exhaust pipe and Silencer became necessary.
Exactly good outer diameter and bending Material : I found a Stainless Steel Pipe, but I needed a Spring hook to connect with Silencer and Exhaust pipe.
When searching with Webike, there are two companies handling, both of which are Material : 10 pcs with Stainless Steel. It was Set. For this reason I bought this cheaper product.
I welcomed Spring hook to Pipe at a welding shop who was indebted (Red circle in image).
By the way, I cut off the green arrow by myself with Thunder.
This Spring hook has no problem at the time of welding, after that, even if you actually apply Spring, I am satisfied because there is no problem.
However, Quantity : 2pc. I only needed Set but 10 pcs. What is only Set.. It was the best if there was a small quantity of packaging.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX14R, KAWASAKI ZZR1400, KAWASAKI ZX14R
Exchange Exhaust System and still use Center Stand
ZX-14R has Center Stand reception on Exhaust pipe of OEMExhaust System.
When changing to an external exhaust system,
Like most OEMs, most Muffler makers do not attach the receiving part of Center Stand to Exhaust pipe.
Therefore, I think that it is necessary to have Center stand stopper like this product.
If you do not use Center Stand, you can remove it, so we will not use this item,
Since it is convenient to have us, we want to use it as is, I bought it.
Installation is just a thing to be caught in the Gold item at the root of Spring of Center Stand.
Installation is easy, but Center Stand's Spring is very hard, and it's about Large strange to return.
After installation, it does not interfere with the Exhaust pipe of the outside exhaust system, and Center Stand can also be used on OEM street.
However, as you can see the product photo, the Center StandBody and this product are in direct contact with and stopping, so contact noise will be generated when you flip up.
At first I tried a little bit, but Exhaust pipeetc. I have not hit, so there is no problem.
Although I got used to it (Lol)
View detail
NOJIMANojima (SAITANIYA) Injector Cover
NOJIMANojima (SAITANIYA) Injector Cover
I bought Carbon because I wanted it. Manufacturer inventory has arrived so it arrived in 3 days. I made Cut more than half but making was good.
View detail