Reviews
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://global.webike-cdn.net/photo/impression/d2/d26495501ce6cf5604137be96b85b447L.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
Very good
I have not fallen yet, so I do not know the strength, but I think Cospa is good.
However, if you wear OffBoots and step on Brake pedal you surely interfere with the Guard below.
Of course, Brake can stepping on, but it will be interfered one by one.
Ordinary Boots may be Large sturdy.
View detail
Fits: DUCATI MONSTER1100, DUCATI MONSTER696, DUCATI MONSTER796
I think that it is a very good product if it judges by the price.
Please note that in the conformance chart described in the Catalog, MONSTER S2796 is not fitted together with Shaft length both before and after.. Since Front interferes with Axle, Shaft length is not enough in reverse. View detail
Included Parts : Shortage
MT-07 (2018) A ride. There was no problem with the installation of this product. However, the cap cover of the hexagonal screw that fixes and fixes the product was not included. Inquiries, about 3 weeks waited for the answer "Although the front has a cap, since the size of the left and right screws are different, the cap is not originally attached because it is the rear" And.... Hmm?... It was that kind of feeling. If my eyes are decent, the product picture has a cap attached. What's more, what's included in the same product for the front for accessories and for rear for not included? "Takaka cap is about" Did it seem so?. There is no item that is supposed to be there.... Although there was sense of incongruity in answer content, I thought that there was no decent answer, no correspondence, I give up more than this. Even if it is a product made in a foreign country, how about just passing along the answer received from the manufacturer.... However, indeed I am sorry if there was no cap for the rear, so I think if you can post the presence or absence of the screw cap cover included with other MT-07 rides purchased this product. I think the product itself is a good one. View detail
If the structure is similar Motorcycle ? ? ?
It is Xake Wash with XSR 900 (RN 46J type) I used it. Since Base is MT - 09, it can be attached without any problem.
As for the effect, it can not be confirmed because it is the product whose true value is demonstrated only after falling over. As much as it does not happen to the extent that it exerts its effect ^ ^;
If it raises the difficulty strongly, the Nut for installation is 13 mm Nut which is not much used in domestic cars. I hope I had it, but some people do not have it ~.
View detail
It is lengthy
The length of Shaft? Is not at all (Lol)
There are around 35, but in fact it is 30?.
I bought only Shaft at the nearby Home center
It looks like Fashion
View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Installation precision Highly likely to work I do not want to take care of me
Radiator Water pump, etc. It seems to be protected if it is a minor fall, but it is not uncommon though Engine Guard ... I personally recommend it View detail
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://global.webike-cdn.net/photo/impression/0a/0a817932181b55f12d3a313366d1fd73L.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
The cheapest in Set of Upper Lower for DCT
There are few alternatives for DCT.
Installation is not difficult, but anyway Engine Mount's Bolt is hard!
Since it is burned by heat and fixed, we recommend spraying penetrant beforehand
Double-end WrenchQuantity : I pushed with limbs using 2pc and got relaxed
Temporarily assembled and noticed but close to Filter lid for DCT
Circular Rubber is attached but Rubber can not be turned on as Filter lid can not be removed.
Although there are pictures in the instruction manual, Bolt which removes it because there is no instruction particularly with arrows
It was hard to understand.
It is more efficient to leave NORMAL's Under Guard first.
I watched it in other people's videos but because the wall thickness of the overhang of the engine is thin
It seems that there is a hole in SlipDown at the riverbed gravel.
It was helpful for LowerGuard selection criteria this time.
It is Large enough that you can go home and move home. The price is also cheaper than other manufacturers and it is saved
View detail
![Upper + Lower Crash Frames [Upper + Lower Crash Frames]](https://img.webike-cdn.net/catalogue/images/41365/CF68KD_pict_1487323627846841_web_TS.jpg)
Fits: HONDA CRF 1000L Africa Twin DCT - black
The cheapest in Set of Upper Lower for DCT
Choice this product because there are few options for DCT
I installed it myself. Please refer to the following
Instruction Manual is Large miscellaneous photo so trial and error on installation position
NORMAL's Engine Mount and LowerFrame's Bolt, Nut are hard anyway
It was the hardest penance.
It is irritating with a miscellaneous tool. Let's use chitin and Double-end Wrench!
Rubber is attached near Oil Filter for DCT
I removed it as it disturbs the removal of Filter cover.
Surprisingly the hole position fitted perfectly as it was overseas goods It is almost nice feeling
View detail
I think that Design and features are also good products
Since there was a point, I bought it at almost half price
Since it is an overseas product, it was reported that it was waiting for 3 months but it was handy in about 1 month ,,,
Because it is made abroad, Instruction Manual was sloppy,
While referring to the small number of parts and installation of other products on youtube
Work ends in about 10 minutes.
Screw was a bit long, but no problem.
It seems that you can expect better functions as well.
View detail
Fashionable and practical
Speaking of Frame slider is a simple color Material : Where there are many DURACON items, various colors can be selected with the combination of Body and Cap?.
My Motorcycle is a type 2 R1 and a little old SS, and while compatible items are disappearing from Lineup of Aftermarket parts manufacturers companies, this product was a wonderful existence.
Although I do not know the original effect unless it overturns, I think that it is not bad as insurance meaning and Dress-up.
View detail
![Crash Frames Engine Guard [Crash Frames]](https://global.webike-cdn.net/photo/impression/35/355369e984a30c3e793f0b934d1ff4fcL.jpg)
It is good for price.
We walked around to VULCAN 400 S. Installation was a bit painful but it was possible to install without problems. I thought it would be better if there was a manual on Japanese sentences. View detail
Compared to competitors' products, COSPA is reasonable
BMW I mounted it in S1000R 2017
Mounting is easy because I only tighten Shaft from Both Sides with Nut
Shut is not stopped because Shaft is short though Nut with a rotation angle stop is attached
I am sorry it is exactly as long as 5 mm longer
Nut 's Cap is included as well as COSPA is good just to improve it
View detail
![RDMOTO Center Stand [Center Stand RDMOTO -]](https://global.webike-cdn.net/photo/impression/54/54f538b2f93ead64217ae67f5d992866L.jpg)
Second Type Model Optimal Center Stand for TDM 850
I was looking for Center Stand for Second Type Model TDM 850 and found that I got this product.
Arrived in about two weeks after ordering, installation started on the spot, and the work was completed in about an hour.
Although it is a simple design, since STAND is easy to hang, it is Large satisfied.
The only dissatisfaction point is the signal wait etc. When the STOP footpeg touches the Left foot when stopping at.
View detail
It is not as strange as Design but it is good without Large
Can be mounted without Cowl processing, looks too flashy GOOD
Although it is the installation with bite the Bracket, the making itself seems to be robust
Slightly short, there is anxiety that Cowl is partly rubbing when it collapses.
Handling Instruction Manual is only English version, there is no explanation on mounting method
WhiteBlack picture after installation and contents Parts Number of points only.
Aluminum Color was included but perhaps to resolve the shortness mentioned above
I think that it is unknown because there is no explanation. Because it was thin and conspicuous because of the color of Aluminum and it was uncomfortable
Made it over. I'm fine at least, so I want Black to match the thickness to the diameter of Body
Also, you have to remove the OEMStainless bolt and use the attached Plating bolt
I am anxious about rust etc. because I am using Stainless Steel at OEM.
View detail
Can not be installed at all - - - -
Perhaps a completely separate model was sent - - - Front was patchy, but here Bolt's Length is too long and Slider Body both do not match the shape of AxleBolt at all. In the first place, only Package has a Vinyl bag, and ProductNo is not mentioned, otherwise for Front has no manual entry. Since the Front could be installed without difficulty, I tried to open it and try to install it, but it was useless. Since I opened it all out, it will be impossible for me to return it, I will fall asleep. From next time I would like to have product management solid. The image was for Front and Garbage that could be attached for Rear w View detail
for Front is perfect
It is used for 2017 YZF-R6. Easy to install! Material is satisfactory, Large is also exactly good. For installation the 14 mm Wrench is Quantity : 2pc is required. The manual is English version but I do not think that it is necessary. The problem is for Rear - - - View detail
Fits: MV AGUSTA BRUTALE675 , MV AGUSTA BRUTALE800 , MV AGUSTA BRUTALE800 DRAGSTER RR, MV AGUSTA RIVALE800
Before using Rust - - -
By saying Large type Motorcycle for the first time, I felt Risk of standing gift, so purchase.
Protector that conforms to Brutale 800 is few, and only this product or OEMOption only compatible goods could not be found.
OEM Product is so expensive that it is appreciated to be able to buy Protector at this price.
Since all necessary items for installation are complete, it seemed possible to install if only a tool was prepared.
However, it is worrisome that Screw is pretty much rusting even before use. Is it such an overseas product?
View detail
It was a failure.
Since you can not open the Oil level gauge when you install it,
Oil There is a necessity to remove for every replacement.
Personally I could not use it at all.
Will not it be okay to buy those who do not have the problem in the above.
View detail
Reliable feeling in case of emergency.
Rear's Axle Slider Guard probably thought that it had no effect as I expected, but I thought it was better than not attaching it pleasantly. I think that it is good to refresh the appearance. View detail
It looks good.
MT-09 (2017) Mounting on.
Because it interferes with the Cover next to the Radiator, it can not be installed as it is.
I made Color and built it somehow.
By all means this shape is good, I think that you can purchase those who have confidence to process and install them somewhat.
View detail