Reviews
Looks OK
I'm not sure if it's a self-satisfied, good looking product or not, but it's not large, and it's a very nice and customizable product All the Instruction Manual was in English version There is a diagram of the installation of the "M" and "M", so anyone can understand it just by looking at it View detail
Fits: YAMAHA FZS 1000 Fazer 01-05
It appears to be a very old stock item
I don't know if the Motorcycle is old, but it seems to be a very old stock item
I bought Gold, but it's not glossy at all, and it's clearly not Gold
It's very disappointing I should have used something like Black with no color influence
And the worst part is that the Nut hole is unusually small, and the 13mm Socket The wrench does not come in
I've fixed it with radio pliers and turned the Body, but it's not completely tight Anxiety
I had to grind the 13mm Socket with Grinder to make it tighter But no matter how thin it was, it just wouldn't fit Give me back my Gold!
I regret that I could have used a domestic Universal Product
View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
The quality is too bad
Installation is easy with a bolt on and a torque wrench 。 It seems to work reasonably well
However, the quality is too bad! The paint is flaky when you press your finger on it, but there are pieces of steel in the PipeGuard Caracalla And sound 。 I can even hear it while driving 。 At first I thought it was a noise from the motorcycle itself, so I had to check it several times while riding was 。 I have been using various products from overseas parts manufacturers, but they are not as good as the domestic ones I've never seen such a bad product, even though it's not the standard
I installed it because I couldn't make it on time for touring, but if it's as cheap as the above, it's good If you are a person who is not a fan of the
They also accept returns, so if you're not in a hurry, give it a try
View detail
I couldn't install it because the Shaft was not long enough
The general comment is correct, the Shaft is not long enough and comes out of the insertion slot on the other side of the closing I'd like to.. It was not long enough to fit As you can see in the photo, it's only this length that comes out, so it's just a matter of fixing the Bolt The Screw length is insufficient; check with HondaDREAM I ended up returning this product and replacing it with a similar product from Ditna View detail
Is that about right?
I've seen other people's imprints and it looks good
I bought it The price is so cheap
I installed it as soon as it arrived
Quantity:Pair (for Left and Right) The hole in the Bolt that attaches to the bar does not fit
Get this Site to replace it as soon as possible
I did, but the Manufacturer responded with
This Bolt doesn't need to be worn to be strong
No problem, he said
Then why did you start using the Bolt to fasten up?
Are you there?
Is this how it's done?
It was a cheap purchase
View detail
I'd say it's an 80 (^^)
Initially, two months' waiting time for the order (>_<) In response to Ue-Big's reply, (do I have to wait that long? I'm giving up.) I'm not sure what to think However, it arrived today, June 10th, and I'm relieved to hear that it's arrived today I'm so relieved that it arrived so quickly! 。 Well, it was the end of an early day of work today, so I installed it while painting it, which was easier than FRONT I put it on once to try it out, checked it out and painted it What's inside is SliderGuardQuantity:Pair (for Left and Right) WheelShaft PenetratingBolt (one piece each) Bolt cap (one piece) One of each, Quantity:Pair (for Left and Right) (Wrong dimensions) This is the English version of the instruction manual 。 Put PenetratingBolt in from the Exhaust System side and Tighten on the Chain side (with SliderGuard of course) de re-tightening I used two Ratchets, one side was 13mm and the other side was 10mm After that, put the Cap on and that's it If you don't paint it, it will be done in 10 minutes I will do the test run now View detail
Fits: YAMAHA MT-07
I don't know if it's the right year, but it's 58 points
My MT-07 is a 2018 model, but the installation (which seems to be common to ALL MODEL) is It's very simple, but it has a drawback:you have to put one of the wheels from the Left into the WheelShaft SliderGuard and co-tightening Shaft together, and Right I apply SideSliderGuard and tighten the Shaft, but I don't know why Do you think that the Right Side is tightened at an angle...? Is the pie in the wrong place? The point is, Guard's pie is too big,...do you want him to bite the gold in the seat? Or do you want to cut it down, or...? I chose the latter, and I sharpened it I used electric tools for the time, so it's not so bad It's a perfect fit It was fixed perfectly I tightened both bolts, and then covered with the catsuit The test run was done, but it is OK When the mileage increases, I want to tighten the bolts View detail
65 points
I bought it as a SliderGuard, do you like the Design? I couldn't say for sure until I came, but the color BESE Black Plate BLUE It was quite beautiful and I liked it The reply said two months for delivery, but I was surprised that it came within a month, installation was easy! However, it took time to remove the FrameBolt of NORMAL because it was hard I removed the FrameBolt and put in new parts It's a little difficult to position the Plate It is the end It's an easy task if you 。 I don't want to be a part of this, but I'm happy with the design, the colors, and the way it looks View detail
It is cheaper than FOR JAPAN MODELManufacturer
It's cheap to buy both front and back, which is the FOR JAPAN MODELManufacturer I'm not sure if you can afford it, but I think you can buy it, and the large size of the protector part is good Material also seems to be strong
As for the installation, both sides of the Shaft are cut in a groove, so tighten them up equally You need a hang to I welded a nut on one side to prevent it from turning
View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Precautions
I am embarrassed to say that I have been standing around a few times since purchasing the MT07
Fortunately, there has been no damage to Large so far, but I bought it for the future!
It is easy to install with the Rear Stand
The installation itself is not particularly difficult
It uses a Hexagonal Wrench, so if you don't have one, you need to purchase one in advance
It is safe because it can protect the water pump area under the waist of the engine, especially on the Right Side Is?
View detail
Cost performance good
It guards the lower part of the tank from falling down
I never thought I'd be able to experience its effects within a round of purchase
I never imagined it would happen Crying
It's easy to price
A cheap Fog light was also installed
View detail
Cospa is expensive, but I'm not so sure about the price
With the attached Bolt, it is a little short and cannot be installed I thought about returning it, but I bought a little long Bolt at the nearby home center and installed it is just one more thing, two longer, and the installation is Smooth, but I wonder why View detail
I'm not happy with the installation
To go ahead with the results, it seems to have come off while driving and was lost
The pedestal and the Slider are separated However, the engine mounting bolts hit the engine mounting bolts before the seat surface and cannot be completely tightened Mm
I think this is because of the design of this product, but I think the design is wrong
If you use it, don't forget to apply Screw Lock and check for looseness on a regular basis
View detail
Rdmoto engine guards
Excellent product, easy enough to install with basic tools, looks good. Shipping took a while, but webike communicated very well. View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
I don't know about the Crash performance because I haven't crashed it yet
It took me about an hour to install it, and it looks great It is refreshing and I'm happy with it, I don't know how strong it is at crashing yet View detail
I am satisfied
I've been wanting a Center Stand on my poorly maintained TDM 850 They were all over $3,000.00 I would recommend this product as it is cheap and easy to install
The method of installation is to put STANDBase between the Footpeg Plate and STANDBody Just use Split Pin to hold it in place
The work took about 30 minutes
View detail
If you're looking for a good costumer, this is it
I don't know how effective it is because I haven't fallen over yet, but it seems to protect me well because of the large size It is
I don't mind, but it also comes with a Bolt cap, so if you can see the head of the Bolt, it looks tacky You might be happy with the way you feel
Best of all, it's cheap
View detail
Almost satisfied
For the installation, I translated it (although there were no instructions for typing it in here, I can see it in the picture We managed to get it installed, and it's solidly accurate, so we shouldn't have any problems with it, except for the fall-guard I have a feeling the Handlebar will be grounded first, but I won't know how far I can go until I roll over Because Protection only 3 points
It seems to be less expensive than the other products, but it's a good quality, so it seems to be a good value for money
The long screwdrivers are attached with lock nuts from both sides, but I don't know where they are attached It was hard to tell. We'll just have to balance the screw out and see how it comes out
View detail
I bought it at a special sale, so it was a great costumer!
I had the Motorcycle shop put it on before delivery It was 2km from delivery and it was the middle of winter + Brand new Tire + Left turn + crosswalk White Line SlipDown in combination with White Line SlipDown (xox)
In combination with the Engine Guard, which is installed separately, it did a good job It was not able to reach Large Clutch lever bent, but (^^;
In terms of the amount of gold purchased, the costumes are not too bad
However, according to the motorcycle shop, it seems to have been installed to the Limit, so be careful about looseness and such It's only subtle to the point that I was asked to put it on
View detail
Good
Ibuy it because it on sale. so I try this one. When I receive it. I feel it is heavy, the condition is good. it is very beautiful. I like it very much. View detail