Reviews
The parts were as expected with a more custom look and feel.
Because the Installation Manual was in English, I installed it by intuition with reference to the photos.
I think it takes about 30 minutes to install if you can read the manual.
We recommend that you install it as a walking stick to prevent yourself from falling.
View detail
Fit?
I was going to install it on a 2005 CBR1000RR SC57, but
Shaft length is too short to fit.
The Screw mountain of Shaft must be applied to Tap.
I bought it because I like the design and I will find a shaft at home center that fits the length and install it.
View detail
The color and the shape are elegant.
NORMAL is Material:Because of the plastic knob shape
The security concerns are undeniable.
This product, which uses Hexagonal Wrench, avoids the mischief of bad boys and
Anodized's tones are not vulgar, and it's a good addition to the color scheme.
View detail
Fits: SUZUKI BANDIT1250
Just in case.
I purchased and installed it to protect it in case it falls over. It's easy to install and gives me a sense of security. Fortunately, it hasn't fallen over since I installed it, but I am satisfied with it. View detail
Just in case.
I purchased and installed it to protect it in case it falls over. It's easy to install and gives me a sense of security. Fortunately, it hasn't fallen over since I installed it, but I am satisfied with it. View detail
Insurance for protection in case of emergency.
I bought it for the training of figure 8 and Gymkhana in the trunk training as Rider, I installed it and ran several thousand? I installed it and ran a few thousand? Fortunately, I don't fall down, but it's worth it if you think of it as insurance for protection. View detail
Just in case.
Engine Guard is a Material:Although the Slider of Plastic was used, the scratch was made in the Engine crank cover by standing on the side stand. As an insurance policy, it is a reassuring weapon. When I installed it, I had a little trouble only with the Left Side (Clutch Side), but other than that, I could easily work with general hand tools. View detail
I love it!
I'm using it on a '15 cbr600rr. for Front's and I put it on my rear! I don't know about the effect as I haven't fallen down yet, but I like it as a dress-up part. View detail
Crash guard with the best costumes
The delivery time was a month or two after I placed my order, but it was worth the effort to purchase these very high quality parts. The instruction manual is very simple, but it includes pictures so you can install it intuitively. There was no problem with the installation and it was easy to install. I don't know how well it works because it's not mossy. It is not mossy and I don't know how effective it is, but I think it protects the Radiator. View detail
I like it.
I installed it on my 2015 reverse car and purchased it as a guard in case it tipped over. I don't know how well it works as it hasn't tipped over yet, but I like the Design. View detail
Costa Rica!
I bought it with Front.
It's like a walking stick that you can't fall on.
It's a good thing you don't have a chance to play an active role, but if you get a scratch on your Front fork or Swing Arm, it's not easy to fix.
The same product is also available at the Manufacturer of the FOR JAPAN MODEL, but the quality is better. It's very expensive!
This one is inexpensive and the quality of the look and feel is perfectly fine.
It's hard to say how much protection it offers until it's mossy.
View detail
Costa Rica!
I bought it with Front.
It's like a walking stick that you can't fall on.
It's a good thing you don't have a chance to play an active role, but if you get a scratch on your Front fork or Swing Arm, it's not easy to fix.
The same product is also available at the Manufacturer of the FOR JAPAN MODEL, but the quality is better. It's very expensive!
This one is inexpensive and the quality of the look and feel is perfectly fine.
It's hard to say how much protection it offers until it's mossy.
View detail
Just in case.
I bought it to reduce Damage when I was standing on my feet. The Instruction Manual is the English version, but the pictures are included so you can install it intuitively. It is a very simple and conspicuous installation. View detail
Installation gives you peace of mind.
It took a bit of time to get it to me because it was ordered from abroad, but it arrived safely. It was very well packed, but the quality was excellent:Pair (for Left and Right) Both of them were scratched and the paint was peeling off. I had a bad feeling about this, but as I expected, the dimensions were not accurate enough to easily install it. I have to widen the bolt holes to fit the bolts and the quantity:Pair (for Left and Right) It is a long Bolt that is connecting the Original is a normal Bolt, but the one that comes with it is a long Bolt. This is a double-sided nut with a screw on both ends. In addition, because this nut has a resin in it to prevent loosening, even if you turn it from Both Sides, you can only turn one side. It screws in and out. When I tried to change to a normal nut, the Pitch does not fit instead of the MScrew. Also Quantity:Pair (for Left and Right) The center of the welding nut of the joint part of the joint part of the Bolt cannot be screwed in because the center of the welding nut is out of alignment. It was such a difficult work, but I think that the person who can do some processing can install it. It looks very compact and sturdy. It seems to protect the engine in the unlikely event of a fall. View detail
Cover at Front and Rear
For SpindleGrip to keep Damage to the Smallest Limit in the event of an accident It is used as a crash protector and can be installed on both the front and rear wheels I feel like we have a system in place to
The black color is comparable to the black body of the car, and the design is excellent I think it is Installation can be done easily with 13mm BOXWrench I referred to the photograph of the installation example attached to the product description column of the Web I am very happy with the performance I would recommend this product as a precaution against crashes, which should not happen It is
View detail
It's gone
I went touring for the first time after the installation, but one of them came off and was lost It's exactly as described in the Instruction Manual, and the BoltBody is still intact Only the black part of Rubber? View detail
Current MT09 cannot be mounted on the short bracket
The current MT09 has a short bracket and cannot be installed. I think it is defective It's a shame, because it's only about a year old, so I guess I'll just have to give it up View detail
I'm not sure if the colors match
I bought it for dress-up, but I was a little concerned about the color difference from the other KTM colors It is
It's a bit of a hassle to take off the hexagon
View detail
Fits: YAMAHA MT-09 TRACER
I'm glad I put it on the Rear, and the Front too
It's for MT-09, but you can also install it on the Racer 900GT without any problem
I installed the Front as well because I liked the way it looked on the Rear
Installation is easy with two 13mm Socket wrenches, but you can use a little bit of One Side If you don't tighten it more, the length from Nut will be snarled
I don't know what Protection is, as I've never actually sledged
It took me about half a month to deliver it, but I'm happy with it because it's a good cosmetic product
View detail
ProductBody is zero, Included Parts:Bolts? No
ProductBody is 0 good, Included Parts:Bolts are ? No M10×60mm 1.25Pitch 2pcs M10×70mm 1 .25Pitch1 pc
M10× 75mm 1.25 Pitch 1 pc (Bolt to mount on vehicle) All 4 pcs Inaccurate, cannot be screwed in, Material:I bought the Stainless Steel at the nearby Screw shop By the way, it cost me 2013 yen for 4 pieces
View detail