Reviews
The effect is Large-Thick, though not noticeable Custom.
As shown in the image, extend Rebel's shorter FFender by 14 cm.
It fits just right in terms of shape, not so much that it disrupts the original design.
If you are not an owner of REBEL, you may not even notice that it is installed.
A fixed pin is included in the package, but I am not confident enough to drill a hole in the Fender.
Double-sided tape is the only fixation.
This will reduce mud splash etc. to the Radiator area to Large width, which will also make maintenance easier.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Meter panelFilm
The Meter was applied to the Meter without wrinkles as long as the dust was removed cleanly. View detail
Fits: SUZUKI V-Strom 250, SUZUKI GSX250R
So-so.
I bought the Motorcycle new and it was scratched from the start.
I was worried that I wouldn't be able to apply it properly and neatly, but I was able to apply it in the same way as I do with my smartphone. Once I was able to put it up well. Sweat
I don't know about durability, etc. yet, but this time I put non-glare on it.
If there is deterioration, etc., another one. [Color] I will put up a Clear.
View detail
Fender removal was requested by DREAM.
The description here says it is easy, double-sided tape only, but it also says that if it has Small cherry biz, it needs to be fixed. When I bought it, it was attached beautifully, so I was not sure what to do with it, but I wanted to install it neatly, so I tried to find a way to remove Fender, but this was quite Large strange. So I took it to DREAM and had them remove it and put it back on again. The price was only a few thousand yen.
I degreased the surface, installed it with double-sided tape, cured it with masking tape, and then decided where to drill the holes. I think it is better to drill the holes inside the corners of the fender to prevent cracking and bending.
The effect is outstanding. I know a lot of people get their Radiator dirty from mud bouncing off even the slightest puddle, but with this on, it doesn't get dirty at all!
View detail
Fits: YAMAHA YFZ-R7
It's normal
It is different from the ones sold on Amazon. So the size is exactly Large and sturdy.
If this were a glass or something like that, it might have received a better evaluation, but it is just a transparent resin film.
Why am I worried about durability (weather resistance)?:1 Set of 2pc.
Well, considering the risk of accidents, resin is probably appropriate.
It is easy to work with, and unless the area is very dusty or dirty, I think it will stick beautifully.
As the previous poster said, it still seems overpriced.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
I want to get it right...
Since the film is flimsy, it easily deforms and bubbles can form in the area.
Also, the film on the main panel is slightly large, so the edges are inevitably raised.
A glare film is included, but this is not recommended for safety reasons as it makes it difficult to see the Meter.
It is a little better to buy a cheap Film from Amazon (Side Panel Film is Large here...).
View detail
Fits: SUZUKI V-Strom 250, SUZUKI GSX250R
I wonder if it's a problem with the "Skills"...?
Products are available in unglazed and glazed quantities:1 Set of 2pcs. One is a VERSION in 6 languages, and it describes how to dry install, but I tried but could not remove air bubbles. I tried but could not remove the air bubbles.:The 1pc. instruction manual English VersionVERSION had a translation (enter here for Wet installation instructions) at the bottom of the first page on the back. I thought, "This way! I tried spraying a very small amount of neutral detergent in the water, but again, I could not get rid of the air bubbles. Moreover, the adhesive strength seemed to have weakened. I read that the air bubbles would naturally disappear after a few days, but after a few days, I went for a run. (Temperature 20°C, distance 150 km) I couldn't even get any sign of the bubbles going away at all. Is this a problem with Skills? View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Meter panel protective film to protect from scratches
Asking PRO to protect the Meter panel just in case it seems to fail to stick.
The workmanship is good, but I am not very satisfied with the overall cost performance, including the labor cost.
About the contents of the product, 2 FilmQuantity:It is a Set, but Antiglare is not necessary and two Super clear cards are fine.
If you fail, there's always the next time ….
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
Price suitable
It was put up at the same time as the car was delivered.
All Quantity:It comes in a set so it can be applied right away.
I don't think air will get in unless it is very messy.
However, the visibility will be adequate.
Do you want to see the OEM intact and clear, even if scratched?
Do you want to endure the visibility and continue to ride in peace?
Can it be scratched in the first place?
I feel safe. (Insurance for the mind) I chose the
View detail
I was able to fit it without that much discomfort.Large sturdy, even for a 2017 model.
The color of the Fender is matte black, so I was able to install it without much discomfort. I worked with the Fender installed on the side, but it is easier to work with the Fender removed. If you want to use the fixed pin, you need to drill a 4mm hole so that you don't accidentally stick the tire in. I haven't done any real wet weather driving, but the Fender is extended and seems to work well. It was installed on a 2017 RC90, although it is not correct in terms of fitment. I bought mine because this one had a faster delivery time, but only at my own risk. 4 Pins were included, but I'm using 2 for now and seeing how it goes. View detail
Fits: Others
Waterproof Cap
I am satisfied with the Socket itself, but the size of the attached waterproof cap is smaller than the body, so I could not use it. View detail
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
I don't want to mess up my Rear shock.
I installed it because I was concerned about the mud that would roll up on the rear shock. The texture is good with no difference in appearance from the Rear Fender. The installation was easy with double-sided tape, but it is necessary to use a drill to install the pin to prevent the pin from falling off. I think it is necessary to install the pin because the edge of the pin was slightly lifted after about 2 weeks. View detail
Fits: HUSQVARNA Vitpilen 701, HUSQVARNA Vitpilen 401, HUSQVARNA Svartpilen 701, HUSQVARNA Svartpilen 401
Before the scrape gets in.
I purchased this for Svartpilen 401 2021.
The Meter surface of this MODEL is a MATERIAL that could easily be scratched if rubbed with sand and dust.
If anything goes wrong, it will be a very noticeable area, so it would be good to deal with it as soon as possible.
While Film seemed to be firm and thick enough to protect it, its strong resilience gave the impression that it was a bit difficult to apply.
After applying the first sheet, I realized that it would work better if I positioned the corners, lightly fixed the position with masking tape, and then started peeling off the backing.
It's a micro-small bubble, so that's good, but I plan to do so the next time I reupholster it.
Since it comes in a two-pack, even if it fails a little, there is peace of mind knowing that there is always a next one.
If it were a little cheaper, I would give it a perfect score.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Should be put up at the time of a new car.
It also comes with a fine outer bag, a dust remover Seal and CROSS when pasting.
I don't understand why glare and Antiglare are combined, they should be sold separately.
The edge treatment and shape are highly accurate, and the Small anti-scratch effect is outstanding, so I wanted to put it on when the car was new.
I don't know about durability. If it is bad, I will add a note.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
For LCD protection
[How is it used?
Paste into MainMeter
Was the one you received as per Image?
Street Image
Was the installation difficult?
It's a little difficult to stick it so that it doesn't get air bubbles.
How was your experience with it?
There is a sense of being protected.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: BMW C400X, BMW S1000XR, BMW S1000R, BMW R1250RS, BMW R1250R, BMW R1250GS, BMW M1000RR, BMW M1000R, BMW F900XR, BMW F900R, BMW F850GS, BMW F750GS, BMW S1000RR, BMW S1000RR, BMW F900GS, BMW M1000XR, BMW R1300GS, BMW R1200GS, BMW F800GS
The size was perfect!
It arrived soon after I placed the order. I ride a C400X and my wife rides a C400GT. [Color] With Clear [Color] Quantity in Smoke:I installed the two sets of 2pcs. on each of them. I was able to apply it to both units without any air bubbles, and I feel that the meter is now easier to see. I am glad that I purchased this product because the dirt on the meter can be easily wiped off. View detail
I was able to charge the battery normally.
We used Rocket3gt's Standard Equipment, Heller Socket, to charge our phones.
This is just an imprementation after using it for a short distance to check the operation.
The phone (Android device USB-C) charged well.
I am concerned that the Heller Socket may come out due to vibration or bumps because of its loose insertion.
The Rubber cap is also a little loose and I am worried that it will be blown away by the wind.
While the Heller Socket is inserted, it glows Blue, but with rocket3, you can't always see the glowing slot due to the angle of the rocket.
I would not want to waste power consumption, even if it is very weak, so I think it is unnecessary for me.
Also, you can't (or don't want to) leave it plugged into the Motorcycle at all times, so you need to carry it with you.
In that case, I think it would be helpful if the size were a little smaller.
If there are any changes in the evaluation to match the actual conditions of durability and a little more severe use, we would like to reflect them at a later date.
At this time, we have determined that the product is cost-effective with no fatal product defects.
View detail
Fits: DUCATI Panigale V4, DUCATI Streetfighter V4, DUCATI Diavel V4
Great
I like that it comes in two types, Antiglare and Super clear. It was easy to apply. View detail
I was able to do this without removing the Fender
Front Fender cannot be easily removed.
Therefore, it was necessary to devise a way to keep the Drill tip from hitting the Tire when Drilling and to keep the Extender in close contact with the Fender.
From both SIDE of the Fender, a thin chi board was inserted to protect the Tire and to compress the Ex-Kender.
It is a good idea to use masking tape during drilling to avoid scratching the Fender.
Fender is quite stiff.
View detail
Fits: YAMAHA YFZ-R7
Scratch prevention!
Meter surface was commented to be easily scratched
I purchased and installed it since it is a new car.
Seat is Quantity:1 Set of 2pcs.
Other, Surface Cleaning sheet×Quantity:1 pc.(same as anti-fog for Glasses?)
ditto mark Cloth×Quantity:1pc.
ditto mark Stretching pattern paper (Material):(Plastic)
Instruction Manual (Translation (please enter here))
View detail