Reviews
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS 660, APRILIA RS 660 LIMITED EDITION, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA SHIVER 900, APRILIA TUAREG 660, APRILIA TUONO 125, APRILIA TUONO 660, APRILIA TUONO 660 FACTORY, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
It does not fit TUONO 660.
I was looking for a Fender Eliminator for my TUONO 660 and ordered this parts because it has the same shape as the RS660. However, when I opened the box and temporarily assembled the parts, I found that the bracket was too long and hid the tail lamp. It would be impossible to install without cutting and drilling tools.
It would be good if we could confirm in advance whether installation is possible or not.
View detail
Texture is not good for the price.
I bought this product because it is a pooch, but the ATEC
We were out of stock and had no choice but to go with this product.
The installation is Exclusive Design but it does not look good.
View detail
I'm disappointed.
It was Pooch's Brand, and ATEC was sold out.
I had no choice but to choose Puch. The product was crappy for the price.
I am sorry to hear that.
View detail
Puch SIDEDownForceSpoiler
In conclusion, it is absolutely impossible to install it properly.
If the pattern paper is Quantity:I also had trouble with only 1pc.
And the pattern paper is not Exactly to match the top?
The location will change by about 5 cm depending on whether you want to adjust it to the bottom or the front or the back
The procedure is different if you refer to the Webike Product Page video for installation
In the video, Plate is applied first, and after 24 hours, Rubber rubber is placed over it.
Product was sent already installed!
This is because the Plate is located behind the Rubber Rubber.
Rubber rubber like Toilet's SUPPON will rebound like Spring and interfere with installation.
I looked it up on the Net and found that those with strong final strength have weak initial strength.
We are a GarageHouse, so our cars and motorcycles are both heated and cooled in the house!
Compress and paste for 1 minute at room temperature above 28 degrees Celsius or
I tried and tried, but it was impossible.
Emon sold separately (amon) Ultra Strong Double-Sided Tape (for Bumper, Spoiler, etc.)
Buy Strong Fixing Type White 25mm×width 2m×length 1.14mm×thickness 1.14mm 3910 for outside of car and
I machined and installed it.
The product is quite straight and is to be mounted on a curved cowl.
It's not so much that it's attached as it is that it's forced to be attached with Strong Double-sided Tape!
The shape does not fit the side cowl of the ZX-10RR at all.
I'm inclined to say that it's a 2021ZX-10R/ZX-10RR exclusive part.
ZX-10RR looks straight but Cowl is quite curved
It doesn't fit at all, especially the Right Side is almost floating.
If this is what you're talking about installing, I'm pretty sure it applies to all other Manufacturer's Motorcycle's.
Whether it is YZF-R1M or CBR1000RR-R, it is possible to paste it!
At the moment, I've driven about 50km to try it out and it hasn't been removed.
It looks cool, so that's good.
View detail
Fits: BENELLI TRK 502, BENELLI TRK 502, BENELLI TRK 251
Individual differences?
Benelli TRK251 2021 model year.
I shaved it down and put it in.
View detail
(It is not impression.) since the connection method was not known, I had you let it use this column -- it is the field engineer who did the impression contribution of the > impression person-in-charge Mr. point to the goods. Although it thought th
(It is not impression.)
since the connection method was not known, I had you let it use this column -- it is the field engineer who did the impression contribution of the > impression person-in-charge Mr. point to the goods.
Although it thought that two or more photographs could contribute and the text was written, there is a part where only one sheet is made to correct the text to in part since like.
-- It is unclear.
a photograph -- like -- of a muffler and a tool -- photograph -- like -- -- please delete.
View detail
Fits: YAMAHA YBR125, YAMAHA YBR125 CUSTOM, TRIUMPH SCRAMBLER, TRIUMPH THRUXTON, TRIUMPH THUNDERBIRD, TRIUMPH THUNDERBIRD 1600, TRIUMPH THUNDERBIRD SPORT, TRIUMPH THUNDERBIRD STORM, YAMAHA SR125, YAMAHA SR250, YAMAHA SR400, YAMAHA XJ600, YAMAHA XJR1200, YAMAHA XJR1300, TRIUMPH BONNEVILLE, SUZUKI SV650, SUZUKI GSX750, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1200
I guess I'll have to choose a design.
I had it on my SR, but it doesn't look right.
I think DucatiMONSTER S2 or Triumph would look good. Or a domestic NAKED.
good point
The windproof performance is high.
It is highly universal.
The design is very large and fits many kinds of cars.
Installation is easy.
A bad point
It is not suitable for some car models.
I think it's a good product as a windshield, although it was a mistake for me. If you have a NEO CLASSIC car, it will definitely look good.
View detail
Fits: SUZUKI V-STROM 650, SUZUKI V-STROM 650 A, SUZUKI V-STROM 650 XT
be torn
I installed it, and it was good parenthesis in the carbon style, but at the point when I ran about 5,000 miles, it cracked about 5cm between the Fender part and the Chain case part. View detail
Accessories missing
When I checked the product after it arrived, I found that the attached parts were missing and could not be installed. Lack of inspection and confirmation of the product before shipping is a problem. View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, HONDA CBR1000RR FIREBLADE SP2
Too inaccurate …
It doesn't fit where it should
The supplied bracket and the supplied screw won't fit, if it doesn't fit the OEM parts What do you mean, the parts you sent don't match up with each other yet?
One Nut is missing to begin with …
It said installation difficulty EASY 40 minutes and it's true
I gave up easily after about 40 minutes
Have the others been followed?
View detail
Fits: BMW R1200RS, BMW R1200RS, BMW R1250RS, BMW R1250RS
Impossible to install.
Since the goods have been sent, I entered work to install, but the position of the Screw hole was Gap and it was impossible to install. Since the position of the hole is empty at the position of the indentation of Screen, it can be thought that all the lot of this product can not be installed, rather than the position of the hole being Gap only for the product sent. It is not thought that it is a special item. Is it a design mistake rather than a defective item?. View detail
I am disappointed.
Windproof performance is perfect, and I think that it looks good with the Forme of Ninja 1000.
However, two discontent points.
First, the attachment protection Seal is very bad. It can be torn quickly and the position of the hole is fundamentally Gap.
It is disastrous that air enters when you repack it to forcibly align the hole position..
I wanted you to be more conscious here as it is a visible part.
Next, if you fully lock the Handlebar with Screen in the lower row, Lever and Screen will interfere (!)
I got scratches in the hit part here..
Honesty, I want to return with Objection Level.
I thought Quality was high for Purch's products, so it was disappointing this time.
View detail
Bought the worst
Within 1 month after purchase
Trying to change the Variable Screen
The axis broke after moving it.
The third time it gets broken
I can not trust making.
Because it will be broken soon
It is better not to purchase.
View detail
Fits: DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Pouch Racing Screen
Because the installation is only Bolt of OEM
I get Wobble.
View detail
Disillusioned with suitable making
First purchase overseas products. Because it is a simple thing, I can understand Manufacturer's commitment.
Mirror Bracket's Bolt Quantity : Pair (for Left and Right) Although we only take two places to change and exchange, the position of the hole is the same as OEM, but the angle of the hole is totally different. So I will not get in the right position any way.
Although I wore it in a floating state this time for the time being, I do not know the difference even when driving ...
Once you have time, shave it to be at the same angle as the OEM with a round gold fillet.
View detail