Puig Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Puig

07 Aug 2023

Kick Stand Extension

Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT

Japanese Webike user

4/5

Side Stand For prevention of sinking

The parking lot where we stopped for touring was gravel, and although the MT-09 with only the Side Stand did not fall over, it was quite unstable because the Side Stand was stuck in the gravel, so we installed it as a safety device.
I would have preferred to have it in black, but the upper plate is stainless steel, so I wondered if that would be cost-effective. I was looking at the instruction manual and found that the Illustration of the Parts was wrong as in the case of SIDEWing….
If you have seen the instruction manual, you should not read it carefully, because it will confuse you.

However, I think it is still a little expensive, perhaps because of the weak yen, so if you are likely to encounter gravel parking lots or scorching hot asphalt on your touring, you may want to consider the risk of not being able to drive due to damage to the clutch lever in case it falls over, and the cost of replacing the lever. Considering the cost of replacing the lever, I think it is a good idea to install the clutch lever as a precautionary measure.
* View detail

Puig

08 Jul 2023

Rear Fender

Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25

Japanese Webike user

5/5

Isn't that good?

Installation is very easy, and the pictures in the Instruction Manual are easy to understand.

2017 MT-03. delivered last week and went for a quick run to break in the car, but it got muddy.
It looks like the previous owner went with a Fender Eliminator, but I didn't notice it when I bought it, because all I cared about was Engine and Position.

I haven't ridden on it yet after installation so I don't know how well it works, but I like the way it looks.

I think the price is too high, as I've seen in other people's impressions. View detail

Puig

26 Jun 2023

New Generation NK Screen (SPORT)

Fits: HONDA CB1000R NEO SPORTS CAFE, HONDA CB1000R NEO SPORTS CAFE BLACK EDITION

Japanese Webike user

4/5

Installation and Impression

◆Motivation to purchase
I am happy with the 2022 CB1000R Black Edition, but I have two concerns.
Wind pressure is too much.
Meter is hard to see.
The running wind pressure may be Level if you are used to riding a NAKED, but it is hard for me who has been riding a Cowl car for a long time. It is tiring to drive.
The Meter is almost a full LCD Unit, but it is difficult to see when light hits the display surface. The condition with the sun on its back is the worst, and the west sun is devastating. You can't see anything at all.
We knew that Screen was the one that would solve both problems, but until now there has been nothing for the Minor change type CB1000R. We also knew that it would not come with one for pre-MyChain.
I like the design and have no choice but to buy it.
Thanks Webike for handling it!

Installation
The conclusion is simple.
A hexagonal No. 3, 6, or 8 tool is all that is needed, but a hexagonal wrench will not work well with the handle. Ratchet wrench and an extension of about 10 cm are required. 27N-m and Quantity:A Torque wrench that can be set would be ideal.
The Instruction Manual is in Spanish and English version, but this is not a problem as the Illustration is easy to understand.
In the Instruction Manual, the first step is to remove the Mini Cowl from the Standard Equipment of the EUROPE Specification car, but of course my Japanese Specification car does not have one. I was nervous that I would have to use the Arm for this Mini Cowl, but I did not use it, so it was a large sturdy Arm.
I was surprised to find that the bolt on the Screen is No.6 while the Bolt on the CB1000R is No.8. I was worried that Puig might have misplaced the Bolt, but the screw diameter was the same, just the size of the large head of the Bolt was different.
The only thing to keep in mind is that the Screen must be installed with all the mounting bolts loosened, since the Arm is mounted at an angle to the side of the Motorcycle, and since the Arm is three-dimensionally bent, everything must be perfectly aligned to fit. However, this allows the Bolt to be tightened to keep the parts in place and prevent them from moving against each other, even though the Motorcycle is attached to the Arm in only two places.
Conversely, the angle of installation cannot be adjusted.

◆Impression
As for the driving wind pressure, it reduces it wonderfully. You can see it even at street speeds, and it is extremely effective Large at highway cruising speeds. I will never go back without the Screen.
Meter visibility was also effective. In situations where the sun is in the front, visibility is clearly increased. Even when the sun is on the side, the light is blocked up to the direction indicator light located at the top. (I bought the Dark smoke, but if you are more concerned about light blockage, you could choose the Black.)
However, it had no effect on the light from behind. This is because the Screen is angled to reduce wind pressure, and the distance between the Meter unit and the Screen is too large for the Meter unit.
However, I am satisfied with the Large size because the points I was concerned about could be improved in the Large size and I like the design.
Thanks Puig! View detail

Puig

24 Jun 2023

Racing Windshield

Fits: KAWASAKI NINJA2 Helmet50RR

skooby

5/5

Genuine Puig Screen for Kawasaki Ninja 250R

This was a screen for a Kawasaki Ninja 250R as they wanted adark screen for touring. The look of the screen was exactly what they were looking for. They are reasonably priced and the fitment is perfect with what we read from reviews for his model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket touring front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's dark smoked colour is a superb screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail