Reviews
It makes a huge difference in the ease and cleanliness of the work!
I thought it was the right decision to buy it, even though it looks chubby.
Using this, I was able to apply it neatly without the need for water application.
View detail
To remove Dust Seal
[How is it used?
Fork oil leakage on HUSQVARNA TE250i after Enduro race and off-road driving, sometimes after washing the car.
RiskRACING SEAL DOCTOR Seal Doctor to take Fork's Garbage. Dust Seal Remover I bought this product to get a Dust Seal at
Before I bought this product, I had to carefully remove the dust seals with a slotted screwdriver, but with Remover, I can easily remove the seals and clean the forks much easier.
The price is inexpensive and I highly recommend it to Off-road riders.
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the band holder from ProTools, made from a steel construction with a PVC coating over the band to help improve it's hold. About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts. Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the band holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job. Difficulty of installation: The process to install takes a few minutes, place the band holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made band holder from ProTools that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Good for fixing when machining or fabricating Parts!
[How is it used?
I bought this for fixing when making parts for out-of-print cars and other parts fabrication and parts machining.
Was the one you received as per Image?
It is heavier than expected, quite sturdy and solidly built with no rattles, etc.
Was the installation difficult?
Bolt holes are provided for mounting on a workbench for easy fixation.
How was your experience with it?
It is very easy to use despite its compact size.
The small Vise can be securely fixed without shaking even when processing grinders, which is dangerous. It also makes it easier to file small parts, which greatly improves work efficiency.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have no complaints as it is very easy to use for the price and works beyond my expectations.
▼ I think it is such a useful tool that I wish I had purchased it earlier.
View detail
Read the instructions for use and use tools correctly!
This tool is ideal for brake fluid replacement.
A Base is also included to prevent the Tank from falling over.
Fluid can be firmly removed by applying a certain amount of pressure.
However, care should be taken not to apply too much pressure, as the Tank may dent and break.
Since brake fluid is considered industrial waste, please dispose of the waste fluid after replacement at the nearest service station, motorcycle shop, or PartsShop.
View detail
I think the sound is too loud.
It's enough to do a little muscle training? The weight of the machine is about 1,000 pounds.
The operating noise is noisy, perhaps louder than a motorcycle engine running at full speed.
If the electric Tucker is as good, you might as well go for it.
View detail
Not sticky and easy to use
[Purchased for.
I replaced the Blinker with an Other Brand Product, but the wiring was more exposed than I expected, and although I think the product is Large and sturdy, it looked ugly, so I bought it for protection and to fix the appearance.
Impressions of use
While the Vinyl Tape on the market is sticky and not heat resistant, this one is not sticky and sticks to Beauty without stickiness, and it is also heat resistant, so it is perfect for wrapping Motorcycle wires and such!
It was very easy to work with because it was not sticky and I could take it off and rewind it again if I felt I had made a mistake.
Thanks to Wiring, we were able to hide and protect it very nicely, so if you are in the same situation, please give it a try!
【Review】
Cosy, no complaints!
Wiring is now clean!
View detail
For Parts Cleaning
[How is it used?
Used to clean Engine Parts of vehicles under Restore.
When I watch Restore videos, they all use a similar Brush, so where do they sell it? I was wondering, but when I went searching I found a few that are normal.
We purchased this product, which was relatively inexpensive among them.
Was the one you received as per Image?
It is just the right Size as shown in the picture.
Also, although the bristles are firm, I personally felt that they could be a little firmer. I personally felt that it could be a little firmer.
How was your experience with it?
The PVCNylon bristles, however, are not as firm, so it is somewhat difficult to remove stubborn dirt.
I think it is sufficient to remove ordinary dirt.
The hairs did not fall out during use.
[Points to note]
If you do not choose the right place to use it, you may scratch your car.
How did it compare to other products?
I used to do my best with Tooth Brush, but it was small and sometimes took quite a long time.
I felt that this product would be more suitable for use in non-narrow areas, etc.
【Review】
It was easy to use and inexpensive and necessary and sufficient for cleaning Parts.
Personally, I thought the hair could have been a little firmer.
View detail
Fine car wash good
It seems to be suitable for fine car washing.
Will use for next car wash.
View detail
Purchased to measure fork oil level
Used only to measure Fork oil level. It is not difficult to handle. View detail
stain removal
I wanted something with a good spatula-like shape and some strength to remove bad stains, peel off adhered parts, etc. I found this one and bought it to try it out. The length, shape, and feel are good. The shape is quite sturdy and stronger than what I expected.
I would have liked something thinner that would be a little more flexible and bendable, but I thought this would work.
View detail
Screw Cutter
I use the ratchet type for re-tapping screw threads that are out of alignment and for drilling new screw holes, because it is easier to use.
Although it is used only occasionally, it is useful in many ways to have 1 pc.
View detail
It takes patience.
After about 2 laps, there will be a little gap between the rim and the tire, so you can insert the tire lever and pry it out. View detail
It was simultaneous purchase with an MDF rim stripe. If this gauge is used, it can stick really simply and finely. I thought that what is necessary was just to use a rim stripe and a set since it is not high.
It was simultaneous purchase with an MDF rim stripe.
If this gauge is used, it can stick really simply and finely.
I thought that what is necessary was just to use a rim stripe and a set since it is not high.
View detail
Fits: Others , その他
Can be used without problems
There were comments that the Light was dark and difficult to see, but it worked fine for outdoor work during the daytime. View detail
Works great for washing narrow crevices!
[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.
Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.
How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.
As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.
[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).
*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.
View detail
Convenient for bore upetc. engine tuning!
It is useful when replacing the Gasket during engine tuning such as bore up, clutch replacement, oil cooler installation, etc.!
Old gaskets stick to the surface and are difficult to remove, so a cutter blade or similar tool is used to remove the gasket, but a scraper is more beautiful and quicker for detailed work.
The price is not so expensive, so it would be good to have one in the family.
View detail
Convenient to have
I bought this because the Cowl claw on my CT125 is hard.
It is very different without it.
I was able to remove the hard nails without breaking them.
View detail
Heat resistant and easy to use!
We used it for Joint protection of SensorWiring near the Engine, where normal Vinyl Tape would melt due to heat.
It is not sticky like regular Vinyl Tape and is smooth and easy to use.
I didn't know this product existed until now, but now it is really useful.
View detail
DAYTONA Syringe Kit
About quality and texture - Top quality. The syringe has a durable plastic housing that can be reused many times even when exposed to brake fluid. About the feeling of use - When removing and adding brake fluid from the master cylinder I like to minimise the chance of brake fluid being spilt on my paint work and this syringe and hose kit suits my needs perfectly. Products to buy together - The brake air bleed set from Daytona is perfect to purchase together with this syringe kit so all your brake bleed needs are covered. Difficulty of installation - The syringe kit is easy to assemble from the included items and even easier to use to extract and inject whatever fluid is needed. Cost performance and comparison with other products - With the inclusion of the hose and zip tie I find the syringe kit good value for a product that can be reused multiple times and comparing to the other kits available here on Webike, it's also the best value. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - The included hose is only 15 cm long, so depending in your intended use it might also be worth adding some additional hose to your order. View detail