Reviews
Fits: TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS, TRIUMPH DAYTONA 765, TRIUMPH STREET TRIPLE 675, TRIUMPH STREET TRIPLE 675 R, TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA 675, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS
Pay attention to compatible car models
I bought it from the agency official Site, not Webike. But it is quite vicious, so I will post it here as well.
We made inquiries in advance and purchased the product after receiving a response from the representative that there was no problem.
I started from the Brake Side, but the Bracket of the Sensor did not fit. I couldn't install it...
So I sent a question to the distributor and moved on to the Shifter side.
I'm looking at the assembly drawing. "I guess I'll have to change my Shift rod... I was working on it while thinking what to do, but during the sub-assembly, I felt something wrong and discovered that it was physically impossible to install.
As expected, I put in an Objection to the agency, but the first reply was Just follow the assembly line and you'll be fine. Reply to the effect that.
I've also attached a picture of it ……
I finally got through to them on the phone and they told me that the product I ordered was discontinued and that they had sent me a new product after the Model Change. Of course I didn't agree to that.
And the conformity confirmation of the manufacturer side is not taken, and I'm going to borrow a vehicle from Triumph now to check the fit. I got a false information. Is it wrong to think in common sense of Japan even if it is through an agency...
It's also a Large thing to check if there's a precedent for your purchase.
The movement of the product itself is smooth and the processing is careful. It is a pity because I also liked the appearance.
View detail
Fits: MV AGUSTA F4, MV AGUSTA RIVALE800, MV AGUSTA F3, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE 10-15, MV AGUSTA F3
Good
I used it on my F4-BRUTALE.
Design or good.
Quantity:Pair (for Left and Right) Since it can be removed separately, it is convenient when you use the Rear Stand.
View detail
Fits: MV AGUSTA BRUTALE 10-15, MV AGUSTA F4, MV AGUSTA RIVALE800, MV AGUSTA F3, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA F3
I bought this to put on my F4-BRUTALE.
It's pretty good
One Side is independent, so it is convenient when you use the Rear Stand.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX636, KAWASAKI ZX10R
Clutch SideLeverSwitch interferes
The brake lever is fine, but there is a problem with the clutch lever, so I gave it a 3 star satisfaction rating.
The protrusion to push the clutch lever switch is too large even though the car model is supposed to be Exclusive Design.
If it is not processed, the Lever adjustment function will die and LeverSwitch will always be pressed, so it will be impossible to start the engine in 1st gear.
If the protrusion is shaved with a stick file and adjusted, the problem will disappear, but the purchase of the person who cannot do the processing is not recommended.
View detail
Fits: BMW S1000RR, BMW S1000R, BMW M1000R
Fitting is perfect.
It is a little longer than NORMAL.
The Bracket part of the Chain Cover is more solid than other manufacturers'. 。
I think the product is perfect.
View detail
Fits: DUCATI PANIGALE 1199 R, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299
That's the exclusive product
When the Cowl mirror is moved, it is the Plate which blocks the NORMAL installation hole. Well, if it is said that this price is cheap with mere Aluminum Plate, it is not cheap. However, if it is thought that it makes by oneself, after all it is a thankful commodity. Because it is a special product, the screw hole position etc. with OEMBase plate is almost no problem. Although the texture falls a little when compared with DucatiPerformance of the ridiculously high OEM, because there is only Red alumiteSpec. here, I think that it is good for the person who does not want to make it conspicuous by making Cowl the same color as possible. View detail
Fits: KAWASAKI ZX-25R, HONDA CB650R, HONDA CBR650R, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA X-ADV, KAWASAKI Z125, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z1000, TRIUMPH STREET TRIPLE S 660, KAWASAKI NINJA 1000, DUCATI 848, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 939 SP, DUCATI MONSTER 821, DUCATI MONSTER 1100 EVO, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER 848
Beautify your Engine with Aluminum Cut-out
I used it on my HYPERMOTARD821, the Ducati is a beautiful looking bike, it's a pleasure to ride but it also has a unique look and design. We want to make sure there are no gaps even in the most ordinary places. This is the OEM Material:It's a beauty that can't be compared to the tasteless plastic filler cap. It also increases the sense of luxury. View detail
Preparation for Bar end mirror
Purchased on the recommendation of others.
I'm considering repainting it in OEM colors because the shape is good, but the color doesn't match slightly.
View detail
Great product
Makes chain adjustments a breeze - just loosen the axle and give one click to each adjuster and re-tighten axle. Job done. Product is very well made and I will be putting them on all my future bikes because of how easy it makes adjustments. View detail
Fits: KAWASAKI NINJA 250, KAWASAKI NINJA 400, KAWASAKI Z400
Great product
The Fender Eliminator is great for achieving a tidy and short tail. The product is well made and fit for the bike. The only problem is that it it a little bit long for the licence plate of Hong Kong. Otherwise it is perfect. Recommend to anyone who want a clean shape of bike. View detail
Very good
Fit for Beauty. Bolt stop from the back. View detail
A must-have for circuit driving
This cover is used when the OEM Mirror is removed during Circuit driving.
I'm sure the aerodynamic drag will be reduced and the time will be reduced by Comma 0.0. lol
View detail
How many pieces are in the box?
Body is Quantity:1 Set of 4pcs. but
This is a Quantity:1 Set of 2pcs. so you have to buy 2.
It would be nice to see it listed in the product Page.
View detail
The most suitable anti-drop for BMW's new S1000RR
The anti-fall appearance is simple, and the installation does not destroy the overall feeling, which is the most important. The anti-fall itself prevents damage to the car body by reversing on the spot. Other prominent anti-fall shapes are really ugly, and they are also anti-fall on the spot. This function is sufficient, even if it is anti-fall when riding in reverse The lever is not very useful. I can trust the quality imported from Italy. This brand is also quite famous among the modified parts. Good stuff, buy it! ---------------------------------------------- Fangshuai simple appearance, loading not undermine the overall sense, this is the most important. Popular brands in itself is proof of in situ reverse the destruction of the body, other protruding shape of the popular brands really ugly, as are anti-situ reverse, this functionality is enough , then reversing to ride even drop resistance bar effect is not large, the quality is imported from Italy I trust that this brand is quite famous in the inside modified parts. Good stuff, buy it! Powered by Google Translator View detail
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE S 660, YAMAHA MT-03, YAMAHA MT-25, YAMAHA FZ1, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675, KTM 125 DUKE, KTM 250 DUKE, KTM 390 DUKE, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09
It's a quality bar Weight, though not too assertive.
I put it on my 2020 R1.
good point
Easy to install, just tighten the screw.
It is not overly large and can be casually dressed up with good quality.
A bad point
Well, since it is small, it is lighter than the OEM Bar End.
So the vibration may possibly be increasing.
I'm not sure how to do that, but I think you can add Weight using something other than this Parts. I think.
I think it's only for people who want to add weight while doing dress-up easily and casually, so
If you're the type of person who wants to make a statement, "I'm wearing Glaringly! For those who want to make a statement, or for those who think that a lighter bar weight is nothing.
I think it will be the Parts that does not meet the will.
But well, I've driven about 1000km with it on, and I'm not that worried about vibration.
If you like the Design, you can have it.
I liked it.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA MT-10, YAMAHA YZF-R1M
It is a stylish Slider.
I put it on my 2020 R1.
good point
The texture is good. It is also easy to install because you only need to tighten Screw.
Anodized is also clean and does not look like it will come off easily.
It can be tightened rather firmly, so, well, I think it's better than nothing.
It is also Point high that it comes with front and back at this price.
A bad point
The Axle Slider of another Manufacturer or OEMParts is fixed with the Shaft penetrating through the Wheel, but this is not the case with Quantity:Pair (for Left and Right) I'm not sure if it will protect me in case of a fall (or if it will fly away).
However, because it seems to be able to protect me enough if it is a thing and a low speed and a standing scald that it will be few to be taken care of, it is probably the product of the dress-up strength that says that I want Slider for the time being but also want to be fashionable.
By the way, I'm saying this and that, but I'm a Rye TEC believer and I like it.
View detail
Fits: MV AGUSTA F3 800, MV AGUSTA F3 675, KAWASAKI ZX-6R, YAMAHA TRACER 9 GT, YAMAHA YZF-R1 M, SUZUKI GSX-R750, SUZUKI GSX-R1000R, YAMAHA MT-09 SP, MV AGUSTA F3 ROSSO, BMW S1000R, HONDA CBR600RR, KAWASAKI Z900RS CAFE
Rye TEC Fluid Tank cap
I like it. It's only self-satisfying, though. View detail
The finish is messy.
The surface finish is textured, dull and wound. View detail
Very good
Looks Refreshing . I like the fact that there is no Bolt on the surface. View detail
Very good.
I think the texture and fitting are both good. View detail