Reviews
I used WasteGold
It does not fit in Lever due to lack of elasticity
Even if you make it slippery with the Parts cleaner, it will tear at the dumpling at the end of the lever
It went to the Garbage box within 2 minutes of opening it
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
Shoddy stuff that's not worth talking about
When I installed it, I dipped it in water according to the instruction manual, but as soon as I completed the installation, one of the ends was torn off It's gone Maybe there was a small scratch on the item or something 。 By the way, there were no scratches on the brake levers because the car is new 。 I bought it for its good looks, but it was the worst piece of crap I've ever seen 。 If you want to remain as a Custom PartsManufacturer for many years to come, you need to make sure you're ready for the future Get your head out of your ass and make sure there's quality control! View detail
I tried to install it and it was torn and it was useless.
It broke at the time of putting in the round part of Lever's tip.
Parkari I do not slip at all even if I buy it.
Grip is Pro Grip of Large justice
Lever grip is ...
As a result it has been split without terminating it.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
Lever grip
Brought it to use better grip for brake lever and clutch. Not easy to install. During install need use some trick to put in lever. Comfort and nice looking View detail
Once received the goods.
Once received the goods. Good quality products are very easy to install. Affordable and fast Easy to use. One color in use and very good packaging. One set of 2 pieces, both left and right, but the logo removed very easy and sticky. View detail
Once received the goods.
Once received the goods. Good quality products are very easy to install. Affordable and fast Easy to use. One color in use and very good packaging. One set of 2 pieces, both left and right, but the logo removed very easy and sticky. View detail
Grip
This is the second time buying this grip. Good feel on the lever. Nice material and the feel on the grip on brake or clutch improve. More response on brake tap on fingers. View detail
Good for vibration countermeasures
Grip is also made soft material, vibration is not transmitted to hands and it does not get numb and it is saved.
Also in the summer winter, there is not much heat from Lever.
The interval between Grip and Lever is slightly short, so my fingers will hit you, but I think this is unavoidable.
I think that the price is somewhat higher, so I think that it is better to buy it at the time of Sale etc..
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is good ♪
Even with Dress-up to Lever Motorcycle's image changes pretty ♪
Installation is not particularly difficult, but there may be a little hang.
I have been using it for about 3 months, but it seems to be okay for the price as well ♪
View detail
Lever Grip 06-08-3029
SP TAKEGAWA(Special Parts Lever Grip 06-08-3029)last round, black order Come to try and feel that the foam material is good quality, soft and durable, but the screen has some peeling according to usage. At a satisfactory level so decided to order it again in blue. SP TAKEGAWA (Special Parts Lever Grip 06-08-3029) Last Round Black Order Let's try to feel that the foam material is good quality, soft and quite resistant, but the screen is somewhat peeling by the use. At a satisfactory level, I decided to order again in blue. (translated by Google Translator) View detail
It's the worst.
This product is in the Lever insertion part before use and defective at the time of molding (Rubber's poor running) There is
I will rip at the same time I put it in.. I did return processing earlier, but what will happen.
View detail
Pleasant Clutch, Brake operation
I used it for Lever of GORILLA. Although I bought it by appearance, the car body looks on a top ranking on myself with ease of use and car body color more than it seems.The durability runs about 5000 Km but I am satisfied because it does not cut at dirty position , The difficulty is that it will be able to take with the null null if it gets moisture in the rain, but you can safely travel if you pay attention and I think that Lever will not become cold in winter and it will also be a measure against some cold weather. View detail
Get cold
It's hard to get in, so when I paint Bead wax in, I entered it very easily.
However, after putting in, slipping too much will wrap around it unless you wipe it off.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is a good feeling ♪
3KJ - Attached to JOG ♪
It looks good as it becomes Race ish ♪
It was easy to wear a little bit of water wearing and slightly squeezing ♪
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
I like the feeling of use.
It will be the second purchase. I purchased it with double-sided tape because it failed to install on the clutch side at the time of the first purchase, but I used it by sticking with double-sided tape, but I decided to re-purchase because I lost it while driving. Although it was described in the manual to insert the product using only water, it was difficult to wear it with this, and because there was a great possibility that it will be cut again, it is easy to slip on the product and the lever end part I tried installing it by blowing a little silicone spray so as to make it easy to install. However, after installation, if you do not degrease with a parts cleaner or the like, it will rotate with Zuzzle every time you hold the lever. View detail
If you would like to change the appearance of Lever, please.
Purchase to reduce coldness from Lever in winter. However, there was hardly any effect in the outside air temperature 1 ℃ ~ 2 ℃. However, by covering Lever, I am satisfied with self-satisfaction as to whether it is a bit fashionable. Also, when Liding touch is not wearing Riding glove, Lever touch thinks that there is no sense of roughte than bare hands, as long as there is Sponge.
View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It does not correspond to the thickness of Les Bar End.
As I saw that I was out of impregnation before, I put water in Parts and Lever according to the instruction manual and as a result the Brake side finally succeeded after installing on a day when the temperature was high , Clutch side has expired. The cause is due to the fact that the elasticity is small, but it is forced into the thick bar end.
As a result, we attached a thin double-sided tape on the inside of the Parts and fixed it in a form to fix it in such a way that it made it inconspicuous. When considering purchase, I think that it would be better to prepare for it to expire.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
I have run out when installing.
Since there are times when Lever is hot such as summer, I bought it. I included ample moisture and installed little by little, I was surprised it was torn down. Because it is a high item, please give me a more rugged product. View detail
This Manufacturer is white
After using Grip of ALCAN hands, it became interested in the thing of the same Manufacturer and purchased this.
Although it is a casual fashion, there is no way for performance to complain.
The indentation of the part where the finger is caught is JUST and the finger in the state without attachment Quantity : It is easier to do when attaching than 2pc brackle so it is easier for Brake and Shift change.
Although it is Small Parts, it is a dish that seems to have a tremendous Large thing in its Small Suspension.
But, if you compare the operability
Inevitable in thick Winter Gloves .... Well it seems that way.
View detail
To counter the coldness of the fingertip
Installed in XT660ZTENEREOEMLever.
It's Square like Chikuwa.
Installation was really Large strange. Even if it got wet with water I was not able to put it easily. Lever It does not even round the tip of the tip.
- I made a kitchen detergent with water that was dissolved
- Even if you try to bare it with bare hands, because it slides for detergent, wear gloves
- The Lever tip fits in guts while spreading the Sponge
- Then rotate it gently and screw it in
- Afterwards rinse it with fresh water generally, dry it and make it. (There should be some detergent, but it will be disintegrated in a while)
= About usability =
Since the area around the finger became fluffy, at first it was Clutch / I could not grasp the feeling of Brake 's operation feeling, drawer' s feeling. You might as well avoid avoiding sudden clutter driving.
In addition, although I ran in the cold wind, I felt the effect was certain. The finger tips will be difficult to cool down. I felt that Aluminum Lever had been taking a lot of body temperature so far. It's Level that you are going to be the last, but it was nice to install.
View detail