Reviews
The position of the FrontCamera for the DRA RECORDING system.
Mistuba Sankowa EDR-21Gα for FrontCamera.
At first I thought about installing it directly on the light cowl.
It doesn't feel right somehow.
This Light Bracket fits nicely and I am very happy with it.
View detail
Good performance
The performance of the Body itself, including Camera performance and durability, is very good, but loading and saving videos takes a fair amount of time. View detail
For those who want something short.
ArmMaterial surface was pear-shaped and textured
The Standard Type I bought and owned a long time ago was smooth.
No spring, so be careful not to drop the phone when removing it
Installed with Damper as a vibration reduction measure.
Photo shows Quad Lock installed (Damper included)
and Standard Type length comparison.
The only difference is that the shorter arm makes it harder to adjust the mounting and dismounting, and the larger arm makes it harder to adjust the mounting and dismounting.
View detail
For Touring!
I purchased the RAM Mount for my Touring. I bought this product because I also needed it to mount on my vehicle. I like that it is a short type so it doesn't interfere with the meter area. The quality of the product is better than I expected and I am quite satisfied. View detail
Can be securely fastened.
Used to secure to Stem.
Used with DAYTONA Stem Mount.
I was able to fix it firmly.
XMount
Short arm
Using DAYTONA Stem Mount
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
This is so convenient!
I was worried about installing a TMAX because it does not have a bar handle, but this is perfect. The combination uses a Rek Mount and Quad lock. View detail
Excellent combination with Quad locks.
I use it in combination with Quadlock's Ball type. It is a perfect match. The screw part is a bit large and looks a bit tacky, but it will be hidden when the phone is attached, so I think it's fine. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Also applied to X-ADV.
I could not confirm the compatibility of the X-ADV RC95, so I bought it with no luck, but it arrived with no problems at all.
There is very little vibration.
View detail
Very good!
Recommendation!
It's more stable than sticking a Camera on the Fender, and it prevents the Number from bending!
The Camera can be installed in 4 different positions, so it will fit any Large car model!
It is a great recommendation for motorcycles that don't have a place to put it!
View detail
Fits: Others
Garbage
WiFI connection does not work properly.
Works properly to begin with. (Recorded) local
...I found out it was broken.
I connected it as per the manual and the battery went up.
Dishonest response when contacted by Support.
Not worth buying.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Mount with SS
Excellent functionality for use with SS, the detail workmanship is crude, but that's just because it's a foreign product. View detail
Universal Product. Slightly processed
Since this is a Universal Product, some ingenuity is required.
There is a problem with the angle of the camera, but it can be bent and modified to fit nicely.
View detail
Wind Cutting sound of the Dora Recorder was so bad that I put it on.
The Wind Cutting sound of the M760D was so bad that I put this product on to try it out.
It is not for the M760D, but it came on without any problem.
Even a child can do it because it is only attached with double-sided tape. (Lol)
Before I put it on, it was beeping even when I ran at about 40km/h.
The video is running at about 60km/h, but there is no Wind Cutting noise to be concerned about.
The effect is quite good and recommended.
View detail
Also available as for Front.
Used for NMAX for Front.
It can also be used for FrontCamera by replacing the rings and Bolt & Nut.
The "for Rear" is not usable as it is because the outer diameter of the Camera is different.
The Bolt for this product is Torque.
View detail
I'm happy with the sufficient length.
I installed it on my WR250X
I have also installed a ZETA Handlebar and was able to install it without any problems.
Removing, attaching, and changing angles is very easy, as all you have to do is turn the lever.
View detail
Lens is slender. 6 months OR distortion or condensation when driving on roads with temperature differences.
When you cross the Hakone Pass on Route 1, the condensation orLens is distorted.
The first time I was able to get an initial response, but it happened three times in a row.
Just passing through Hakone Pass on Route 1 or near Ashikaga SA on the Tomei Expressway on a day when there is some temperature difference can break it.
It is vulnerable to condensation and should not be bought.
If it is only for town driving and mainly driven in places where the temperature does not change much, it may be Large sturdy.
View detail
I bought the Repair item because I only needed the front.
When it comes to cost performance, Quantity:Set purchase would be best, but
I bought the forward CameraSingle Item because the rear Camera and other parts are wasted.
The images are only information about the installation of the system in such a place.
I went to DIYCenter and bought a 1.5mm thick AngleBracket of a board for about 100-200 yen. Buy an AngleBracket about 1.5mm thick.
Drill a 6mm hole in the Motorcycle Bracket to tighten it together, and paint it black.
It seems that double-sided tape is the basic method of attaching a bracket for a camera, but I was a little worried about it.
Tie Wrap was also fixed.
View detail
Fits: Others
I think Motorcycle needs it.
[How is it used? It is only for use in Touring.
Was the one you received as per Image? Yes.
How was your experience with it? I used to be forced to use a product for car use, but I think Motorcycle should use Motorcycle-specific products.
[Points to note] There is no Monitor screen on the Body and all checks are done on the phone.
How did it compare to other products? The price is higher than other Chinese products, but we understand that it is because it is a JAPAN product.
Other items that would be helpful
Point or hang of installation/Items to be purchased together/ Opinions and requests to the Manufacturer You need to download the app to your phone.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Easy installation on zx10r
Installed on Motorcycle as I am addicted to my phone.
RAM Mount's are easy to install.
Simply remove and replace the Bolt on the Stem.
It is equipped with a locking agent, so it takes a lot of strength.
View detail
Wish I had switched to this earlier.
It is TORQUE 5G and it is just the right size. Just by clamping it, even if it is a little rickety, it doesn't gap at all. It is as expected from Ram Mount. View detail