Reviews
Halfway to use in Motorcycle
The concept of wearing the Motorcycle instead of attaching it to the Motorcycle itself is good, but there are some questionable points in terms of usability.
The point that it only operates for 3 hours or the low waterproof property seems to be fatal.
I can't Check images, whether it's incompatible with my iPhone or my settings are bad.
Many times I was disappointed when I saw what was recorded.
View detail
Good camera mount, high quality that lasts!
The RAM Mounts designed for the GoPro do not come with the GoPro thumbscrew or the stainless acorn nut as depicted in the photographs. Instead, they ship the GoPro adapter with a nylock nut, a tiny machine screw, and a washer expecting this to be used in lieu of the GoPro thumbscrew. One can easily re-use their thumbscrew, but the Acorn nuts have to be swapped over from leftover GoPro mounts or purchased, but they are not retained in the RAM GoPro adapters! This allows the nuts to be easily lost. The rubber balls on the RAM mounts combined with the stout center assembly are the biggest selling points of the RAM mounts. It puts the other brands to shame! However, I am not a big fan of the sheet metal screws used to attach the ball assembly to the base. I could understand if it was lean manufacturing to reduce the number of specialized adapters, but almost all of the RAM mounts use the ball assembly. It would have been more secure and practical to produce an integrated ball assembly for each of the bases. That way I could still swap between mounts but bypass the need for the 2 sheet metal screws that could strip out the plastic or fail over time. I would have liked to see the ball assembly integrated into the suction cup mount. I also would have liked to see the thumbscrew included, or at least provide an acorn nut or nylock nut that is retained in the plastic GoPro adapter. This way the end user can simply reuse the GoPro thumbscrew without digging around for extra nuts. The machine screw included with the RAM mount is a smaller diameter that isn't as secure as the GoPro screw, and as a result the included nylock nut (which is too small to retain in the housing anyhow) has a smaller thread diameter that does not allow the use of the GoPro thumbscrew. It's almost as if RAM designed the GoPro adapters as a secondary after thought. I do like the twist lock suction cup mount. It provides a sturdy camera mount on glass or smooth surfaces, and the double socket arm is very secure and adjustable. Overall: 4/5 stars. I don't like how RAM included the GoPro adapter without proper hardware. The use of sheet metal screws to secure the ball assembly to the base is also cheaply done. It should have been integrated from the get-go and still allow for lean manufacturing principles. Otherwise it is a very solid mount. View detail
stable and without shaking
I put RAM MOUNT Gopro ball mount 1" and RAM Mount short arm palstic in the DJI action camera and installed it on my Ducati StreetFighter 1098. During driving the RAM MOUNT is very stable and without shaking. View detail
Ram Mount Ta Bagーs
Purchased to fix Smartphone Holder on Separate handle
I found it very easy to use because it can be fixed anywhere with Pipe!
It can also be used to fix the Camera to the Mirror, making it highly universal.
View detail
just in case
I put it on my new Motorcycle because I was rear-ended. May it never see active use…. View detail
I would recommend it.
I had always wanted to install PMC's Stem Steel Emblem, but I had given up because I had installed a DriveRecorder when I took delivery of the car.
I found this product and bought it immediately, Camera position was fine, easy to install, and I am satisfied with the large change.
View detail
Fits: Others
Mistuba Sankowa Motorcycle DriveRecorder - EDR-21α (GPS)
It is made by a Japanese manufacturer.
Well-made and secure.
View detail
Helmet mount reconsidered
[addendum].
I was pondering how to mount it on the helmet, but when I checked the body weight, I found that drivepro20 was slightly heavier than DDR-S100. I did not check enough.
If the simple bracket included with the drivepro20 is attached to the helmet, the weight of the drivepro20, including the bracket, will be slightly lighter than that of the DDR-S100 attached to the helmet, but the level of weight will be almost the same. However, the Level is likely to be almost the same.
I was disappointed because I was thinking of something lightweight in consideration of the burden on my neck. It is inevitable because I did not check enough. For the time being, I would like to use it attached to the car body.
View detail
For HelmetCamera.
I bought it because the DAYTONA DDR-S100 I was using for Front was going bad.
When I first purchased the DDR-S100, I used it attached to my helmet, but after a long ride such as a touring trip, the weight and air resistance made it hard on my neck and shoulders, and sometimes left me with fatigue the next day or later, so I changed to using it attached to the car body. However, since I have a cheap CHINA 2-Camera DriveRecorder attached to the body, I wanted to use a sub-camera attached to the helmet if possible.
The conditions for purchase were:reliability to work properly in case of emergency, high image quality so that the number of vehicles passing nearby can be read, and small type lightweight so that it can be easily operated even when attached to a helmet, The candidates were Transcend's drivepro20 and DAYTONA's M777D.
In terms of price, drivepro20 can be purchased at a lower price, but M777D comes with RearCamera. Both cameras have the same built-in Sony STARVIS for image quality, but the M777D has a brightness of f1.8 while the drivepro20 has a brightness of f2.8. Other, M777D does not have GSensor, and drivepro20 can be used while charging, but it does not have a waterproof charging cord. After comparison, we found that the M777D is inexpensive, the RearCamera is not necessary because we intend to use it attached to the helmet, the Lens can tolerate a little darkness because we rarely ride at night, the GSensor is better, and the DAYTONA has difficulty connecting to the iPhone and Wi-Fi, I chose drivepro20 for the following reasons:DAYTONA is difficult to connect to iPhone and Wi-Fi, there is information that settings cannot be made from the app, and waterproof seems to be manageable with some ingenuity.
I installed drivepro20 on my vehicle and used it for an early morning ride. Since I was in the neighborhood, I used the drivepro20 on battery power, and it ran on battery power for less than 2 hours. Of course, I was able to record without any problems, the picture quality was as expected, and the brightness was a little dark as expected.
The bad thing is that GSensor seems to be quite sensitive, and even with the setting set to Low, it reacts to the slightest vibration, causing the camera to record Events. I think it might be robust enough for helmet mount (Large), but I think it is necessary to turn off GSensor when installing it on a car body. Also, as I knew in advance, it is not activated when the power is turned on like a normal DriveRecorder, but it needs to be activated by switch operation, so you need to be careful not to forget to turn on the switch.
For use while supplying power, I purchased an additional OptionPower Cord for the M777D and used the outer cap part to make a waterproof cable. I would like you to sell WaterproofCable as an option since it is possible to use it while supplying power to the device.
I am now considering how to attach it to the helmet, and I expect that it will work as intended since it is much smaller and lighter than the DDR-S100.
View detail
Fits: Others
Just in case.
We installed it because it gives us peace of mind in case of emergency.
I didn't really want to put it on to look at it, but ….
View detail
I could use it for akeeyo's drareco.
Installation was also possible on akeeyo's AKY-958N.
However, there is no flexibility in the Screw tame.
Since I also added DAYTONA's Fender Eliminator, I chose "for Left", but "for Right" seems to work fine too.
View detail
I used TaBrettHolder in my car.
It is easy to install and easy to remove. I drove 300 km with the MINI TABrett Holder next to the glass in my car and it did not fall off nor did the Holder drop. I think the adsorption is strong. However, I purchased it for a vehicle, so I do not know what will happen if I install it on a Motorcycle cowletc.:Since it is Plastic, I removed it when I got home because I think it will deteriorate if it continues to be exposed to sunlight. View detail
RAM Mount U-shaped Clamp
For now, I am using it for both GSX1300R HAYABUSA and GSX1300R HAYABUSA.
I will buy another one for CT110 HUNTER CUB later, but I also bought it for CT110 HUNTER CUB because I was worried that I would not be able to use it without Navigation.
The angle of the clamp is not that much of a concern, but I appreciate that I can install it without worrying about the angle, and since it is easy to remove except for the clamp, there are no problems other than a little bit of hassle for now as a dual use.
Even with vibration, I still haven't broken the Camera on my iPhone XS for Navigation.
View detail
I would have liked to have continued to sell BS−10
I replaced my BS−10 that I had been using for less than 4 years when it failed.
I considered the successor model, but it had improved functionality or was considerably more expensive, so I had to settle for the BS−8c.
This is the popular version that omits Wi-Fi, GPS, and Others.
Well, that being said, the minimum requirements for a driverless camera are met, so I think this is a good thing if the price is acceptable. However, what I would like to see improved is the reliability of the Adapter−? I would like to improve it, but what I would like to see improved is the unreliability of the Adapter & minus;? The most important thing to remember is that the camera is not a "real" camera, it's a "real" camera, and it's not a "real" camera. I don't use it in Helmet, I fix it in Handlebar with Option Parts.
I have to use BS−9b to mount it on my Helmet, because the Helmet mounted Adapter− moves easily and I have to adjust the angle of view with my phone using Wi-Fi every time I use it. For now, I'm using it as a connection until I install the M company's body-mounted DVR.
View detail
Short is the best.
I purchased the Short Type because the standard was too long and difficult to handle. I like the quality and feel of the product. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
I think it's all settled in nicely.
I think it's all settled in nicely.
The regrettable part is that
It comes with Screws for installing and fixing the camera.
It would have been nice if it was the same color as the Body anyway.
Silver on Black stands out
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Ideal for mounting Pipe Handlebar
If you are installing a RAM Mount on a Pipe Handlebar body, this M8BaseBolt is the perfect replacement for the Handlebar Clamp Bolt.
There is no need to worry about mounting gapping due to vibration. The M8BaseBolt can be mounted on a handlebar clamp, so there is no need to worry about space limitations.
View detail
Easy and long time recording of the driver's recordings.
I had been hesitant to purchase a recording device for my Motorcycle because of the price point and the continuous recording time, but when I found this product That's it! I did not hesitate to purchase it.
We found the recording quality to be clear enough for 1080p. The included 32G MicroSDCard theoretically allows for 5 hours of recording; if your Motorcycle has a USB power port, you can use the included USB power cord for longer recording.
I used the included Handlebar Mount to secure it to the handlebar, but in my case I used one of the included SpacerRubbers to secure it to the 27mm diameter section (2 included). The mounting and dismounting can be done with one-touch, so there is no need to worry about theft.
The instruction manual states that various operations can be performed with a smartphone using Wi-Fi, but currently the app for that purpose is not available and the user is instructed to use an alternative app. Since this is an emergency universal app, detailed settings are not available. The smallest necessary operations, such as checking recording status and playing back recordings, are possible. I gave up on this area because it is not Japan.
At the time of writing this impression, it has only been about one month since purchase, so I do not know how durable it will be for long-term use, but at this point, I am happy with the purchase.
View detail