Reviews
Well made, look good
I recommend this product and would buy again, superior to other brands. I would have liked to use bearings or some high-cost detail ... since it is not very económica. View detail
Buy again
GALE SPEED's Wire Clutch Holder is the second one from the ZX12R of the previous car Purchase
I bought an MT-09, and I was going to replace it someday, but the $100,000 benefit Gold was decided So I ordered it
I know the quality of the product, so I didn't have any doubts
However, in ordering around April 26, Webike's order page says
"In stock at partner warehouse, shipping on the 28th I was told that
The subsequent email confirming the order said it would ship on May 19
If you ask It's May 19, since the order is for Manufacturer Assembly He said
But it actually arrived on April 30
I guess they have fewer staff due to the influence of Corona, but they should at least manage the inventory properly Let's
View detail
Weight of the Clutch is reduced by about 40%
I got to know this product on SNS, and I called the president of OhnoSpeed and asked him about the effect directly
I am grateful for the president who is very enthusiastic about Katana, old and new, and was eager to consult with me
I have arthritis in the base of my left thumb, but the Normal clutch is too heavy and I can't get through traffic and the It used to be a pain to run long distances, but after installing this product, the weight has been reduced by about 40% Clutch operation is now a breeze
It is well made and has a wide range of adjustments with no wobble, and will be a great fit for many people!
There are two types of this product, and it will be used for Master Cylinder of Brake in the future if you want to replace the brembo with a brembo, the holder part is the NORMAL color:I chose the Gray one
If you're like me and don't plan on replacing your brake master cylinder, you can use Holder You can choose a limited edition Black with a Black part
Spare lever is priced at 6,000 yen (excluding tax and shipping)
I highly recommend this product to people who are considering their first customization of the New Model Katana You can
View detail
Lightness Satisfaction
The OEM Clutch is very hard, and it's too much to hold the Clutch lever, not only for city driving but also for city driving I found this product when I was in the market Ohno Speed's exploration of KATANA is great from the User's perspective It is a product of no doubt, recommended View detail
The difference between the NORMAL and the rest is obvious
Earlier, Wire and Relay's Arm were installed and were pleased with the lightness, but When I added the LightClutch holder of Ohno Spade, it becomes even lighter It was an even bigger surprise I wish it was a little cheaper, though View detail
It has reduced the burden on Clutch
Since I changed the brake master to Gail, I changed the Clutch holder as well With NORMAL, my hand was getting pain from Clutch fatigue when I ran long distances, but NORMAL The change to 34→32 has lightened the burden a lot Looks are not a NORMAL non-issue, of course! View detail
It will be very light.
It's for gsx1100s
I am using it on gs1000
The price was expensive so I bought it pretty well
One word of comment is very good
Armetc. I am using it together
For Arm only Clutch out of etc etc. There was also dissatisfaction
It was resolved brilliantly
ArmQuantity of yrp : Set Clutch lever AdvantageClutch board Clutch reinforced We are using lightweight countermeasure parts
Recently when holding a Clutch of NORMAL's gs 1000
I reconfirmed that it has changed to half force strength once again
gs1000. Every time I meet the owner of gsx1100s, the goodness of Lever
Explanation
It is true that saying that prices are cheaper after price
There is no doubt that it is a part you do not regret once you buy it!
View detail
Fits: Others
The width of Clutch meat widens → Long time to grab → Tired of hands → get used to → ask what you bought for yourself
L29 (Short lever) Although it is a feeling of use, it is honestly subtle. Besides the events of the general comment, the cause of exhaustion is Lever too thick, I think that it is also in the position to put your finger, but even though thoughtfully mistaken, I gave up because it is Wire drawing after all. I did not match Mini bike. Also there is hang in the installation of Lever side Wire Stopper (Although it is written in the Instruction Manual, it is insufficient, Pivot gets little by little as you make Lever outwardly and it can be laid out Line).
Self-assured world of parentheses only (I should have done to Berlin).
I got caught on the top of the Lever part with kohken, and wanted to make it the simple is best, unnecessary thing.
View detail
Fits: Others
Since it is a high product, let's buy it after seeing the real thing
Large Light weight, rigid feeling, no wobble, smooth operation. The color of Lever holder was settled in Titanium, I liked Large. However, Small scratches are seen in Lever and Black of Adjuster, and politeness is not felt in the assembly of Aluminum, Jura. Consumers will be worried about this kind of things. View detail
It's better if you have a cheaper MODEL
Making of goods - Usability is perfect without problems
Until now I used cheap overseas, but it is quite different indeed
But maybe there is a cheaper MODEL
View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://img.webike-cdn.net/catalogue/images/19291/cl-hld_holder_TS.jpg)
Fits: Others
It's pretty good..
bremboLever set (Out of print) Why is it cheaper to purchase separately with bremboLever than to purchase?
I am satisfied because the appearance will change.
View detail
Fits: Others
I did not want to lighten it, but it's pretty light!
The color of Standard Product was a little shabby so I tried it like NORMAL っ ぽ い Black.
It looks good, it became lighter than I thought.
However, there is too much play in Lever itself! It moves quite well up and down.
Besides that price, this accuracy is a structural problem.
Manufacturer here seems to be a lot of good products, but all I bought is Ha Gap.
View detail
Fits: Others
Used for ZEPHYR 750
If it is 24, it becomes considerably lighter, but Stroke becomes Large and the finger Quantity : Even if it is grasped by 2pc multiplication it is unlikely to enter Neutral.
This is the best if you want to lighten it anyway by four people.
Stroke is increasing without complaining especially when operating with 4-piece multiples, but it is light and high rigidity female Pass can be cleared.
I think that it will be lighter even at 29 Ratio because it is simply accurate and operativity is good. Finger Quantity : I think that 29 Ratio will be more comfortable with 2 pc multipliers.
It is far better than GALE SPEED and because there is no adjustment mechanism, the number of parts is small and there is almost no backlash.
There is no needless headache and private appearance is the best.
View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://global.webike-cdn.net/photo/article/86/1457188706586L.jpg)
Fits: Others
If looking and Custom focus, there are also purchases!
ACCOSSATORacing clutch,
GALE SPEEDWire Clutch Holder Kit,
I was worried but brembo's MechanicalClutch Leva
As it is currently installed, the price 32000 yen (tax-excluded) of
We selected only Holder L-29.
We only port the Lever division.
Holder comes with Clutch switch.
Clutch switch has 2 Patterns.
Wire play adjustment & Lever position adjustable.
The Clutch switch can be a Small Type,
I feel a little tired..
Three lines are connected, but when installing,
Treating it somewhat seems to break from the root Pin.
Especially finger Quantity : People who are 2 pc or 3 pcs,
Feeling the Wire to be drawn,
If you do not set Lever to a long distance
Clutch may not run out.
Making a little play makes it lighter,
No problem if you cut Clutch with 5 fingers.
Look, brembo's Brake MASTER and
It is GOOD because I feel unity.
However, the color was not better than I thought.
The price is also high (With Lever, tax included 40,000 yen over) ,
It was slightly lighter than NORMAL,
There is no need to forcibly change.
As stated above, if you are concerned about the appearance it is Recommendation.
Do not forget to buy Seal of ItalyMark on bespoke.
Depending on the model, Clutch
Because it seems there are times when it can not be cut,
Type of Holder is L-24 or L29 or L34
Let's choose firmly from Lineup.
View detail
I will not slip..
Because there are holes, there is no worry that hands will slip when operating Clutch.
Although I do not adjust the play frequently, it is very easy to adjust.
It looks good, and it is a bargain, but you need to process the Clutch switch to install it on a commercial car.
View detail
Clutch operation has become lighter
It is exchanged according to bremboRCSBrake master.
The installation itself is a difficult task because it is only a task of detaching exchange and adjustment using the adjustment fee of Clutch Cable, but it was a little troublesome as Wiring connection of Clutch switch was checking Wiring on Service Manual.
I feel like I installed it, but first I understand that the Clutch operation got lighter. However, because it was not easy for Clutch to get worse, it was necessary to adjust the position of Lever far away. If you have a shorter finger, wearing Gloves for winter is not recommended as it will be poor in operability.
It looks like Brembo's Body color somehow, so it looks like he looks the same as you expect it is as expected.
It would have been better if the color and texture of the paint could be adapted to brembo....
View detail
It's lighter than any Manufacturer! After all it is a specialty shop !!!
The other day, I had you interfere with Unicorn's Showroom and tried it out.
KATANA of the test car is very good and easy to ride ~ And, anyway, this Easy ClutchKIT was light ~ Ah.
I felt my hands hurt when I was waiting for a signal or things so far, but this was none at all.
KATANA Recommendation to everyone in love.
As expected it is a long-established store
I know everything about KATANA....
View detail
It is not of inferior quality. Since it is high goods as it is, it is an appropriate place. The weight of the Lever itself is light. Probably, operativity is a place where it is usually appropriate to realize it as Dress-up goods up as an
It is not of inferior quality.
Since it is high goods as it is, it is an appropriate place.
The weight of the
Lever itself is light.
Probably,
operativity is a place where it is usually appropriate to realize it as Dress-up goods up as an object for town riding.
Although a few was expecting the kana and kitchen which become light with
Wire type Clutch, it did not change at all.
Well, since this was my selfish expectation, it is an unavoidable thing.
View detail
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 400SS MACHII (S3), KAWASAKI 400SS MACHII (S3), KAWASAKI 350SS MACHII (S2), KAWASAKI 250SS MACHI (S1), KAWASAKI 250SS MACHI (S1), KAWASAKI 750SS MACHIV (H2), KAWASAKI Z2 (750RS), KAWASAKI Z1 (900SUPER4), KAWASAKI H2, KAWASAKI 750SS MACHIV (H2), KAWASAKI 750SS MACHIV (H2)
A price is also cheap and a form is also beautiful. Although there is also a portion with coarse finishing for a while, it is conviction, considering a price. The color is half-Luster black.
A price is also cheap and a form is also beautiful.
Although there is also a portion with coarse finishing for a while, it is conviction, considering a price.
The
color is half-Luster black.
View detail