Reviews
It purchased in order to suppress mud splashes. Since the size of a fender was small, the expected effect was not acquired, but it is preeminent for the dress-up effect up. It unites with a front and there is please.
It purchased in order to suppress mud splashes.
Since the size of a fender was small, the expected effect was not acquired, but it is preeminent for the dress-up effect up.
It unites with a front and there is please.
View detail
It attached to ZZR1400 of 06. [O point] The area of which * protection is done spreads substantially, and is very safe. * By the product made from carbon, the dress-up effect up is also expectable. * Since it is an exclusive type according to
It attached to ZZR1400 of 06.
[O point] The area of which * protection is done spreads substantially, and is very safe.
* By the product made from carbon, the dress-up effect up is also expectable.
* Since it is an exclusive type according to vehicle type, tank form is fitted and there is a sense of togetherness.
[x point] Although attached double-stick tape is used for * attachment, a tape is somewhat thicker, and after sticking, a crevice is made between a protector and a tank.
* The longer one was downward good to a slight degree.
Since the protector has not arrived to the sheet front part, a tank will be exposed to the portion of the boundary.
In fact, this an absolute domain (?) is a portion equivalent to which the fastener of denim something, etc. are exactly, and is just going to become a wound easily.
* Although it is unclear from a photograph, the logo mark of CLEVER WOLF (CLEVER WOLF) comes up to the center section of the protector greatly, and is processed on it.
Very halfway, this will call it garbage a first glance, or will be visible to dirt like a wrinkle.
When it could do, I considered that it was better for there to be nothing.
View detail
Although he had heard that it was thin and hard, since it considered, it was. However, appearance is very good and atmosphere is the highest! If it changes into this sheet, you should make the rear fender a short.
Although he had heard that it was thin and hard, since it considered, it was.
However, appearance is very good and atmosphere is the highest! If it changes into this sheet, you should make the rear fender a short.
View detail
It purchases in fender-less-izing (its original work). A reflector is thin and a balance with a number plate is also dramatically good. The felt of chatter prevention also shines just. Stay is also thick and solid. At 45 degrees, a number
It purchases in fender-less-izing (its original work).
A reflector is thin and a balance with a number plate is also dramatically good.
The felt of chatter prevention also shines just.
Stay is also thick and solid.
At 45 degrees, a number plate also seldom turns to a top too much, and the angle of a reflector is KANJI good.
This product is a number one although there are also many reflector kits.
It becomes in automobile inspection correspondence, that is, a point, and is high.
View detail
07 Use it for RMZ250. With [ although it attached to 06KXF and the diameter of a hose did not suit a little at the time, as a normal hose is exactly removed and changed for 07RMZ / although cared about it and washed also especially at the time of a car wa
07 Use it for RMZ250. With [ although it attached to 06KXF and the diameter of a hose did not suit a little at the time, as a normal hose is exactly removed and changed for 07RMZ / although cared about it and washed also especially at the time of a car wash ] no problem.
Prices are also handiness and recommendation.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1300
It purchased in order to equip with the mono-lock of GIVI. If it pushes from a top since it will separate from a mono-lock if it does not fix firmly ... The sound of BAKITSU is from the attaching part of a carrier. Since there was no breakage, it
It purchased in order to equip with the mono-lock of GIVI.
If it pushes from a top since it will separate from a mono-lock if it does not fix firmly ... The sound of BAKITSU is from the attaching part of a carrier.
Since there was no breakage, it was saved, but about XJR, box wearing is impossible.
Since it fixes at the two roots of a tandem bar and right and left, an overload-proof is unsatisfactory.
If it is as a mere carrier, I think the goods as which a competitive price may be sufficient.
It exchanged for the stay & case of the krauser now.
View detail
It attached somehow. It had the terrible experience, when attached in order of the description enclosed. It is better for reference of components to have referred to the description and for a mounting arrangement to refer to that of a net. Alt
It attached somehow.
It had the terrible experience, when attached in order of the description enclosed.
It is better for reference of components to have referred to the description and for a mounting arrangement to refer to that of a net.
Although it was comment after attaching, resistance of the wind decreased sharply.
It attaches, and aside from Ho, there is no complaint, after attaching.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
It purchased in order to attach the case of GIVI. Although the drilling process of the cowl was required, since that was right, it decided by attachment being possible firmly. Although paint application is also solid and a product is good, since a
It purchased in order to attach the case of GIVI.
Although the drilling process of the cowl was required, since that was right, it decided by attachment being possible firmly.
Although paint application is also solid and a product is good, since a car body is not suited, an instruction manual's being unclear and bending of an attachment subtract a point to be corrected.
When there was that an attachment is somewhat narrow also in an instruction manual, it was written, but since I have you correct and it swarmed, it made for an angle on either side to be different by appearance into the three stars.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
attachment should also attach the w reflector &LED number LGT which it is easy and is one article of a recommend -- if there is a fellow who does angle adjustment in w number, the measure of better w oneself mist will be the highest!
attachment should also attach the w reflector &LED number LGT which it is easy and is one article of a recommend -- if there is a fellow who does angle adjustment in w number, the measure of better w oneself mist will be the highest! View detail
On the screen of normal, the wind pressure which cannot think that the running wind hit the body and a helmet directly and is on a motorcycle with a cowl is applied in tall (seated height ?) me. Then, the screen which has height most was chosen. W
On the screen of normal, the wind pressure which cannot think that the running wind hit the body and a helmet directly and is on a motorcycle with a cowl is applied in tall (seated height ?) me.
Then, the screen which has height most was chosen.
With my seated height, the wind pressure to per shield of a helmet was able to be stopped.
Compared with normal, it is very easy.
If it lies down, a helmet will enter entirely.
It is legible, although there is also no distortion as a name and smoke was chosen.
Attachment is touch that the plastic screw which the hole location is shifted delicately and stops a screen is attached forcibly aslant.
To those who do high-speed touring, I think that they are necessaries.
Incidentally I am 185 cm in height.
View detail
It is rather good!! A wind which whirls per Saki of a breast disappeared. It uses for VTR250. Since it seems that the tip of a shield wears to Wright, a run is also considered at night and a color is clear. The size thought the windscreen effe
It is rather good!! A wind which whirls per Saki of a breast disappeared.
It uses for VTR250.
Since it seems that the tip of a shield wears to Wright, a run is also considered at night and a color is clear.
The size thought the windscreen effect as important and set it to L.
It is being able to install a shield in the location which is considered, and is passed along and boiled since it uses and having admired can perform the adjusting angle of - shield simply.
- The overhang to the cross direction of a shield is exquisite, and does not interfere in a mirror etc., but catches the wind from the front firmly.
Since only the replica had ridden all the time until it rode on VTR250, it was a correct answer, although a disagreeable wind like [ when riding on a bicycle ] could not be put up with but it purchased by the head wind.
On the long-distance touring using a highway etc., the degree of fatigue is completely different.
The effect in the scene where it is forced high speed operation by only the powerless motorcycle was quite large.
View detail
It is a racing type of a MRA screen. It is the form which is entirely covered with a cowl when it turns down, and decreases air resistance as much as possible, and is the best to the maximum high-speed attack. Especially unlike the screen of norma
It is a racing type of a MRA screen.
It is the form which is entirely covered with a cowl when it turns down, and decreases air resistance as much as possible, and is the best to the maximum high-speed attack.
Especially unlike the screen of normal, as for visibility, since it is highly transparent, over a screen is high, and the safety of a clear is also GOOD! Are they items indispensable in the direction run in a circuit?
View detail
It is satisfied with the handy price in very much good silhouette. Doesn't a balance look good to a normal tank? It is the shin without comfortableness's being bad. There may be some persons who feel it a little hard. The touch which straddled
It is satisfied with the handy price in very much good silhouette.
Doesn't a balance look good to a normal tank? It is the shin without comfortableness's being bad.
There may be some persons who feel it a little hard.
The touch which straddled feels meat thickness a few for right and left (height 170) widely.
A silhouette when the way which narrowed width individually just before the width of a frame sees from back thinks the kana ? which is not good.
a sewing machine with an ordinary back stitch -- since like -- the penetration charms of water.
View detail
he imagined -- since it was custom alike and suited well -- purchase. Immediately after goods arrived, it equipped, but it is considerably awesome. However, or [ that it is somewhat expensive ] ... since -- four stars.
he imagined -- since it was custom alike and suited well -- purchase.
Immediately after goods arrived, it equipped, but it is considerably awesome.
However, or [ that it is somewhat expensive ] ...
since -- four stars.
View detail
The fender less kit was attached, and since a pure reflector would be removed, the slim reflector kit of the daytona was attached. If it was the touch which stuck out its tongue when it was the conventional thing, but it is this reflector, it will bec
The fender less kit was attached, and since a pure reflector would be removed, the slim reflector kit of the daytona was attached.
If it was the touch which stuck out its tongue when it was the conventional thing, but it is this reflector, it will become [ mind as the rear view became tight ].
View detail
The rear fender which is D-tracker riding of 2003 models was changed into a 04-type authentic positive one, and it purchased to write to a fender less. Safety related parts are required after all. Since so-called two-wheel police inspection is per
The rear fender which is D-tracker riding of 2003 models was changed into a 04-type authentic positive one, and it purchased to write to a fender less.
Safety related parts are required after all.
Since so-called two-wheel police inspection is performed frequently these days, it is self-defense.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ZZR250
When you would like to attach a carrier box and the carrier is looked for, the touring carrier made from a riding spot is discovered. Most objects for ZZR250 cannot be found and it was saved. Also paying a price so so, attachment is easy attachmen
When you would like to attach a carrier box and the carrier is looked for, the touring carrier made from a riding spot is discovered.
Most objects for ZZR250 cannot be found and it was saved.
Also paying a price so so, attachment is easy attachment at about 30 minutes.
The grade which is hard to enter a little when removing and projecting a load hook and sticking the stay of business.
Although a motorcycle was not asked for the useful load from the first, it could use also for practical use, thanks to this.
If laden weight is 3 kg and the box made from GIVI is stuck, nothing will be put in in inside (^o^; By that, the urethane pad coated with the cutting sheet to the load distribution & impact buffer was placed under the carrier.
I think that a useful load and the gap of some road surfaces can be borne now.
View detail
99ZX-9R was equipped. Since the flange nut of rust rust was there when looking into casually, he wanted to exchange, when the opportunity was before adhering to, and it exchanged this time. It is pleasant somehow to consider it as KIRATSU as the p
99ZX-9R was equipped.
Since the flange nut of rust rust was there when looking into casually, he wanted to exchange, when the opportunity was before adhering to, and it exchanged this time.
It is pleasant somehow to consider it as KIRATSU as the picture.
View detail
Fits: YAMAHA TW200, YAMAHA TW225E, YAMAHA TW200, YAMAHA TW225E
It purchases for down-fender-izing. Although it can use enough also as [ this ], when getting bored with this form, since it can be processed by the ability to delete with sander etc. and can change into original parts, it is very recommended.
It purchases for down-fender-izing.
Although it can use enough also as [ this ], when getting bored with this form, since it can be processed by the ability to delete with sander etc. and can change into original parts, it is very recommended.
View detail
It purchases in order to fender-less-ize. I feel that this matches well most to TW which has carried out the ska tune. Since the tire is thick, the tail of smart Ho is good.
It purchases in order to fender-less-ize.
I feel that this matches well most to TW which has carried out the ska tune.
Since the tire is thick, the tail of smart Ho is good.
View detail