Reviews
Co-Spa is the best product!
I bought the 7mm wide Rim tape, but it is very easy to apply because I just shave the 6mm wide gauge with a Cutter Knife, unfold it, fold the gauge and apply it along the corner of the Rim. I think that it is an excellent thing that can be pasted almost in a perfect circle. View detail
Looks good!
I put it on a new car. Although I used Sticking Guide and carried out it according to Instruction Manual, I was able to stick it comparatively easily. I'm not sure how long it will last, but I'd like to buy it again depending on how long it lasts. The appearance is very good. View detail
It's a bit of a pain to put on, but for the price, it's custom!
It was LARGE weird to apply! It took me 4 hours from prep to crimping. It's a great way to make sure that you don't have to worry about your own health and well-being. The accuracy was good and I was able to paste it without bending or pulling. It is as shown in the instruction manual how to paste, but hang is not to put the air bubble while pasting because it is hard to get out even if you use Dryer later.
I'm not a fan of the overlapping silo, but people say it doesn't bother them. I'm sure I didn't mind it at all when I saw other people put it up.
It's quite satisfying to see the hard work that went into it.
I don't care if it looks good on me or not!
View detail
WR250R
Because Seal is thick, you can reapply it as many times as you like.
But if you don't have an area, you should finish it in two or three times.
View detail
It makes your feet look tighter. (⌒-⌒)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
I followed the instructions to the letter and had no problems.
[Points to note]
Degreasing the sticking surface.
View detail
Whether the price is acceptable or not
This was applied to a 2012 model Ninja 250R.
Since the body color is Red, I made it Tricolore like an Italian car.
Black monochrome Wheel is now gorgeous.
The installation method is to dilute the neutral detergent with water according to the Instruction Manual and spray it on the surface.
I attached it while carefully checking the positioning.
It'll take me about 30 minutes to finish putting everything up.
I recommend this to anyone who is considering an inexpensive dress-up.
View detail
I thought it was an OEM paint job.
I inherited a 2009 CanadaMODEL Busa from my brother that was covered in 4mm Red, WITHOUT Logo. At first I thought it was an OEM paint job. The finish is so natural that even when I cleaned it normally, I wiped it hard with Dustcloth that I did PartsCleaner, but it doesn't deteriorate at all. It's a great Seal! View detail
Rim stripe repositioning won't frustrate you.
Attaching the Rim stripe is quite frustrating and takes a lot of time when trying to fit the four sections together and the overall position of the stripe in a good way, but with this, it's a bang.
However, I'm not sure if I'll have a second chance, so I'm hoping it'll come with Rim stripe for about $200 plus.
View detail
One point Accent on Wheel
Because the wheel of MT-07 was all blue and felt too much assertiveness, Mirror is chosen to reduce the blue color & hellip;
The balance of the balance of the width is also good, so I am satisfied with Large.
View detail
It's easy and easy to apply.
It's very convenient for putting up Rim Tape, and the tape is not gapping, so you'll be happy with the results. View detail
Purchased to attach the film.
Purchased for the purpose of attaching film to automotive window glass.
Anyway, the cost is good. The plastic spatula alone costs about 500 yen, but it has both Felt and plastic sides for wiping.
It was easy to use as it was reasonably pliable in terms of performance, and the Felt surface was perfect, so I didn't need to prepare a hand towel in one hand.
It's the finish of the film, but the cat hair got caught in the mistake of the worker.
View detail
It will be very Race ish.
It takes time and effort to apply it honestly, but the custom feeling after the application is done is even better than that. The adhesive is so strong that you don't need to worry about it peeling off if you just wash the car. View detail
The wheel is also in Electronic flash color.
I'm not sure if it's a new product or not. I put it up because there was an Electronic flash color.
Line width is set to 10mm. (At 6mm, it just looks like a reddish line from a distance.)
When you put it up, it is difficult to put up Left Side because the body of the car is tilted when you use Side Stand.
If you use the Rear stand and straighten the body, you can use the Quantity:Pair (for Left and Right) It applies beautifully.
It is recommended because the image chain of the Wheel can be easily made with only Rim tape.
View detail
The first Rim tape
So far, I've put color tape on the Rim of the Wheel and
I've never thought about giving it an original feel.
A little more flashy wheel for the dark-colored SV-X
It looks good on you, doesn't it? thought
17in. Rim width 6? Check the Sales Manufacturer
Discover RedWhiteElectronic flash colors from MDF
If you're going to wear it, it should be as flashy as this to stand out.
I bought it because I thought it might feel like I put it on.
This time, I also bought a special stick-on guide for MFD
A special jig and an Instruction Manual are included to help you apply it.
It was the right thing to buy together.
It describes what you need to prepare.
Gather the stuff in the house and prepare it.
The point is to drizzle neutral detergent (dishwashing detergent).
If you keep it wet, you can put Seal on it and go
You can compensate for the subtle gaps in the Paste Gap
It goes up nicely.
It's not suitable for working under the hot sun in the middle of summer.
It is recommended to work in a cool, shady place
Once you've decided on the position of the tape.
By warming up your hair with a hair dryer.
Adhesion will occur faster.
This repetition is called Quantity:1 Set of 4pcs.×4 times Total about 3 hours
Here's the result after I finished putting it up.
Red× on Black Wheels; Stripe on White
It got pretty fancy.
But the body of the car is a subdued color.
It's about as good as it gets. A color scheme that looks like
It's SV-X with red coloring here and there.
You're right to choose Red for unity there.
Once you start running, you never know.
If you're stopped, it's just Rim tape.
It looks a lot brighter.
Well, if you get tired of it, you can peel it off.
How to change the mood of the vehicle
It's a nice touch, don't you think? I think.
View detail
Motorcycle's look has changed.
I've wanted to put a wheel Rim stripe in for a long time, but I wasn't sure if I could stripe it by myself, and time was passing, but then I discovered that there was a Guide to put a stripe on it, and I saw a lot of videos on YouTube where you can put a Rim stripe on it, and I thought it would be fine by myself. I bought it because I wanted to.
I was not sure about the color, but I chose the red color.
When I applied Stripe, there is an instruction manual enclosed in this product, so I could apply it easily.
We feel that a separate Guide is a necessity.
The other thing is how durable it is.
View detail
thin
It's not suitable for CourseYouth/Race use. View detail
Rim tape is MDF.
I've only ever used MDF Rim tape.
They are available in a variety of colors and sizes, so I use them for various vehicles.
Be sure to wet it with Spray before applying it.
It will not fail to stick.
View detail
easy to stick to
It is easy to apply if you follow the attached Construction Manual. It will be easier to work with the Maintenance Stand. The undercarriage of the vehicle is not enough to make it look good. It feels tighter. View detail
If you want to put Rim Tape on your Motorcycle, this is it
Rim sticker on Motorcycle (Rim stripe) You can't go wrong with this one if you're going to wear a
There are many different designs and sizes to choose from, so you can match your favorite color and design possible to do
If you buy the Guide that is sold separately, even for beginners, if the size of the Wheel is right, you can use it Easy to install
It can be easily removed in case you want to take it off, and it doesn't have any glue sticking to it
It comes with two spares, so if it goes wrong, it's not a problem
The only downside is that it may be $3,000 & hellip for Seal; but you'll be happy to put it on So forget it
View detail
Image
When I repainted the wheel in black, I decided to put stripe on it I don't want to have fading and peeling, so I chose this product, and I was worried about using a 6″ wheel, but I decided to use a thicker 10″ wheel The result is just like the Image
For the pasting work, it is not difficult if you follow the Construction Manual I did not Also, I think it's better to cut off the backing and stick it on while peeling off the backing little by little Because I made it thicker, the positioning was easy, so I proceeded to Smooth
View detail