Reviews
freshness improvement
I had an opportunity to remove the wheel for various maintenance work, so I had a friend help me with the application work.
It may be difficult to apply it well without using the Paste Guide and without two people working together. It seems to be a good idea.
I am satisfied with the finished product. It adds a little freshness to an old motorcycle.
View detail
Casually add Accent to Wheel
Since the wheel color was originally Bronze, the area around the tires and wheels looked rather plain. We also had a hard time choosing a color for the rim stripe that would go well with the Bronze color. As a result, we applied Mirror Bracket's exclusive type of Silver, and it became an image like the shine of cutting rather than the accent of the color, accent of the genus Gold or Plating. It is not flashy, but I like it because it adds accent like a large person.
Paste is a dedicated Gauge, Squeegee, and soapy water (Mist spray) Anyone can apply it beautifully if they have it.
View detail
Attached to 2005 D TrackerSwing Arm
[How is it used?
Attached to a 2005 D TrackerSwing Arm.
I bought it because I wanted to increase the protection of the Swing Arm and the black part of the Swing Arm in terms of appearance, with a view to competing in the Motard race.
It has been in use for about four years.
Was the one you received as per Image?
As per Image. black and red Contrast is good and I felt that the appearance will be as I like.
We also felt that the Decal itself would provide good protection for the Swing Arm due to its thick wall.
Was the installation difficult?
It is not a difficult task if water pasting is done. If you have a Squeegee, you can paste on Beauty with a high probability.
If you do not do the above or cannot prepare the above, you need to concentrate on the application and carefully apply it so that air bubbles do not form.
How was your experience with it?
After about 4 years of use, Decal stuck firmly and protected the Swing Arm well without peeling.
The Decal itself is also sturdy and large enough that it has never been torn or damaged in any way.
Also, the appearance of the Large change was improved, and I was satisfied with the Large change without any color fading.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
sprinkling
wipe off the fog (about 300 ml empty Spray bottle) and neutral detergent and water.
A drop or two of neutral detergent is OK; add it to the misting cloth along with water. Fill the water to the brim.
Lightly dampen the paste surface and Decal with a mist wipe.
Then, paste them together. At this time, it is best to avoid air bubbles as much as possible, so that later work will be easier.
After pasting, the Decal is pressed down with a Squeegee, spatula, or Towel to expel the aqueous solution and air bubbles.
Then wait a little and you can paste it into Beauty.
View detail
easy to stick to
The front and rear set of 18-21inchQuantity is a great deal for hiding the wound of the rim and for dress-up.:I bought the set
I degreased the parts with Parts Cleaner according to the Instruction Manual, and started applying the parts with diluted detergent water.
However, it floated right away, so I wiped it off with Tissue and applied it dry, using the Sticking Gauge that I had purchased and prepared at the same time.
The result was easier to work with and better looking.
The Sticker itself is easy to apply both in terms of firmness and thickness, so all that remains is durability.
View detail
This is a time saver for Beauty.
Quantity on Stripe:It is a must-have, so much so that it could be a Set.
At first, we degreased and wiped with Parts cleaner according to the Instruction Manual, and then started applying it with detergent diluted water.
However, with this Gauge, it is easy to paste on Beauty, so I wiped it off with Tissue, dried it, and dared to paste it directly on Beauty.
After all, it was done as expected.
I am very happy that the one shot worked out so well.
Using Gauge, I was able to reduce the time required for dry application to 1/3 of the original time.
View detail
Vulgarly gaudy
First of all, it is expensive.
Combined with the color of the Wheel, it became vulgarly gaudy. Also, the Rim was pear-shaped and peeled right off.
Adhesion appears to be weak.
View detail
No need.
Bend the product to make it look like a Rim, but use it as such.
I didn't feel the need to do so.
The point is, if you can make a nice circular shape, you can do it by hand.
I used the circular marks in Rim as a guide when pasting.
I was able to apply it by hand.
It might be useful to have such a landmark, since it should not exist in normal Rim.
However, it is a product of Level that may.
There are two types, one for 4 and 6mm and one for 10mm, so be careful when purchasing.
If you don't like to put it on, it's not expensive and you should buy it.
View detail
Makeover
I bought it along with the rest of the Decal. The look of the image has changed with a sense of unity. View detail
To prevent scratches.
I bought this to change the Image and to prevent scratches. I like it because it changes the look of the Image. View detail
The important thing is the last Dryer.
I'm getting bored with the pure black Rebel and am slowly adding color.
I was going to use White for the Rim sticker, but I thought it would be better to use the same color as Honda's Emblem, which is a bit raw and silvery, so I chose Light gray, which seems to be the closest color on the Catalogue.
The actual color that I received was a little darker Titanium-like color (but not Gun meta) and I thought it was darker than I expected, but when I put it on, it fit well.
The Rim width of the OEMWheel of REBEL250 is 14mm, so I chose 10mm which seems to be the thickest among the compatible ones.
I wanted to use the special Attachment, but it doesn't support 10mm, so I had to apply it by hand.
With the 10mm Rim sticker, depending on the angle, it looks like the entire Rim is colored, which is cool.
What can I say, the angle is difficult. It's hard to make a circle.
It's a little off, but I'm going to Challenge again when it comes off, so I'm not going to let a little thing get in the way this time.
Degrease it and wet it thoroughly with a thin piece of neutral detergent before applying it.
I match the whole somehow, and when I finish pasting, I adjust it slightly, and finally dry it with Dryer. Or rather, I fix it.
This Dryer was very important.
By applying the Dryer firmly, the Sticker tightens up and absorbs the messy part. I was able to apply the Dryer while tracing it with my finger, and was able to put it on beautifully.
When the Sticker is cooled down, wash it with water to remove the detergent from the Wheel. Now it is completed.
The whole process took about 30-40 minutes.
View detail
It goes up nicely.
I have been using MDF Rim stripe for a long time.
It is durable and can be easily and cleanly applied using the Gauge.
View detail
It's so much cooler now.
I have been using Green OEM Rim sticker on my Z400 since I bought it new, but recently I got tired of it, so I was looking for a good one, and I found MDF Rim sticker. I also bought a special gauge for sticking, and did it while watching the procedure of Site of MDF, and I was able to make it good. View detail
I didn't realize how much work I could get done just by having this.
Without this, if you paste Rim sticker, it is quite Large strange! View detail
GoldMirror Bracket Exclusive Type (6M) Installation
I used to have these on my V-strom and was satisfied with the quality, so I chose the MDF ones without hesitation.
I thought it would stand out with GoldMirror Bracket exclusive Type, but it's not so flashy and it matches well.
In the beginning, I used a special attaching gauge, but is it not suitable for the Small diameter wheel? It was difficult to adjust the position, so I applied it without using the gauge. There is a place where the matching surface is a little off, but it is not a problem for me because it is not understood unless I look closely.
The effect is Large for a little dress-up.
View detail
what on Earth is this?
I gave the car a proper wash and degreased it and got to work.
No adhesive like.
I couldn't paste even one lap and went to Garbage bin.
The stickiness was Garbage.
View detail
What the hell is this?
I washed the car properly, degreased it and set to work, but the adhesive was as good as gone.
I couldn't even stick it on for one lap.
I immediately went to the Garbage bin.
View detail
A little pricey for what it is.
The quality is Level with no problem.
If you paste it according to the Instruction Manual, you will not have too much or not enough Tape.
I was able to attach it without any problems.
I think it is better to use Maintenance Stand for Rear to put it nicely.
View detail
On the contrary, it becomes difficult to install.
I bought it to install Rim sticker, but it was hard to install and I didn't need it.
It slips while wetting it with water to stick it.
View detail
Imitation Chain
I'm trying to up-date a 30 year old Motorcycle to 2020s style...
I've heard about NS-1 suspension, but if it's CBX, it must be ComStar.
Spice up your ComStar! That's why I put it up.
Yeah, something about Impact and Parenthesis is good!
View detail
It's a little plain.
It was easy and clean to apply. I don't know how durable it is yet. The color was a little plain. View detail