Reviews
Fits: KAWASAKI ZEPHYR750
oh no!
Honestly under priced. Materials and Sticker cost (I'm not going to stretch it.) View detail
Fits: KAWASAKI ZEPHYR750
5Millimeter long or decide? Recommended for female riders.
I've been using this product on my ZEPHYR750 for a few years now, and I've never had a problem with it. I'm not sure what to do with it. I'm not sure if it's a good idea, but it's a good idea. Don't forget to refuel the wire. I recommend this product. View detail
Fits: KAWASAKI ZZR1100, KAWASAKI GPZ900R
Can't you just half install it?
I'm looking forward to installing it on my zzr1100, and I'm surprised!
I can't reach the front attachment point.
The back part only sticks here …
For zzr1100 and zzr1100 Swing Arm cars... wasn't my zzr a zzr? (Laughs)
There seems to be a difference depending on the year, but they don't seem to grasp that since it even comes with an installation screw.
But I was willing to pay the price to buy a curved aluminum plate at this price if I wanted to imitate it
It's a shame you can't get it right.
I wish you could respond to this in some way.
If you're just sorry for the text, well, that's just the way things are.
I think that's about it.
For now, we will produce the installation part with the aluminum plate.
View detail
It's a donkey.
Replaced from StrikerTitanium.
At first I installed it on GPZ900R, but I wondered if it would be attached to the next DAEG + Striker. I thought, "I'm not sure if this is a good idea or not," and then Rotated Silencer, which was Exactly up to Band.
The sound is better than I thought it would be (a blast?) because I chose the 50mm. Even the weld marks are finished and Large satisfied!
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
There seems to be no mistake about the quality.
This is a thin switch that is required for the Kawasaki High Throttle Kit and is also used by the OEMs, so the quality of the switch seems to be quite good. The look and feel is simple, and with the same quality and performance as the OEMs, it's a good buy. Wiring processing is also not necessary with exclusive Coupler and is convenient. View detail
Fits: KAWASAKI ZEPHYR750
Clutch operation is now easier.
I found a Crack in the ClutchArm and replaced it due to the look and feel of this product and its reputation for lightening Clutch operation.
The manual is included, so it's easy to replace it, and the clutch operation is comfortable and looks good.
I'm glad I purchased this product.
View detail
The Brand for those who understand.
Although this is a brand that mainly deals with old cars, it is a brand that also offers Universal Silencer, so I think it will feel right to put it on any motorcycle.
I also bought it because I liked Design personally and I thought it would be a good one point.
Size is also a good size for one point.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
These are the Parts that can help you overcome your weaknesses.
When I installed the Seat bag on my NINJA that I got last week, I broke the Seat lock and it didn't unlock when I twisted the key.
I looked it up and it sounds like a pre-existing condition or weakness of the GPZ900R or ZEPHYR or something like that.
After much research and investigation on the net, I purchased and installed this product, which is in stock.
Because the pictures in the Instruction Manual are not easy to see, it is better to work while comparing the Instruction Manual with the actual item.
I think it's a sure thing.
The part that works with the key lock is made of Gold, and the ROD tip parts are made of Material:It's DURACON.
I think it's strong enough.
I hope this doesn't break while I continue to ride.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Safe Material:Aluminum
Material of OEM as it is made of Gold:Compared to Plastic, it is very solid and secure.
The price of the product itself seems a little high, but the machining accuracy is high and we can use it for a long time without any worries.
I can highly recommend it because it can be used.
View detail
It's not a floating kit, but that's a good thing
I was wearing a floating kit made by another company
Because it was not for GALE SPEED, the squeal was terrible
I bought one for the GALE SPEED and it stopped squealing and I am happy with it
It's not this product's fault
Because the colors of GALE SPEED were pressed into place
It's going to take a lot of work
View detail
Fits: KAWASAKI ZEPHYR750
It looks Refreshing
Fitting was no problem at all and took about 30 minutes to install! 。 The Sprocket area is fully visible and looks very refreshed! 。 Naturally, you can see the Harness etc. of the Neutral switch, but if you move away from it a little I don't know 。 It also reduces the play of the shift rod and it is a good looking and functional product 。
View detail
Fits: KAWASAKI ZEPHYR750
It's hard to feel the difference in operation!
When operating the Clutch, it is not possible to operate the Clutch due to reduced grip strength and fatigue after long hours of operation I've been looking for a product that can be improved since my GEAR doesn't fit into it more often than not 。 The following information is for your reference only
advantage
The manual with pictures was enclosed, and the work was easy to understand because the instructions are described in detail It was easy
It's a good experience to see the current state of the vehicle as we clean and lubricate the Cable which we don't usually do before replacing it I think it will be
It's a little more tiring to operate the Clutch for a long time while riding around town than before I'm late to the party, but I'm not sure I can tell the difference
It's true that a 5mm extension is not enough, but the difference in length will reduce the amount of clutch operation The difference between before and after the exchange is noticeable only by the first feeling You won't be able to do it
The weight of Single Body is light because it is machined out of aluminum
Disadvantage
Lubricate the Cable and clean and lubricate the Grip hinge before installing this product It's protocol 。 Later on, I thought that I should only replace the product before this process and make sure that the operation is the same as it was before I replaced it I thought it was because you can't feel the change without checking to see if it reduces Or, if you lubricate the Cable and clean and lubricate the Hinge of the Grip before replacing it I think you can see the difference even if you replace this part after riding in the NORMAL state
I think it's a very expensive product, but if you plan, create, and sell the same thing, it's a reasonable price to pay for the same gold I'm not sure if I would be able to sell the same product for the same amount of gold if I planned, created and sold it It makes me wonder if it's the Gold amount
View detail
Fits: KAWASAKI ZEPHYR750
I'm lighter
The installation instruction manual is included and it was not difficult to install
The original was quite heavy, so it feels like it's about 40% lighter than the experience, the long touring Left hand pain is going to be gone!
If I had to say, I'd say it's a little bit of an improvement on the little bit of anxiety that comes with only tightening the fixed Hexagon Bolt and If the price is around $7,000, I'm not complaining at all!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
I'm glad the plastic parts were replaced before they were damaged
Net information that the Seat on the Zephyr 750 will not be able to remove the Seat if some parts break The description caught my eye It certainly makes me wonder how to remove it if it breaks, phew! The Motorcycle I'm riding has never been replaced or serviced once since I bought it, so I'm not sure if I'll be able to get it off before it breaks I bought this product to replace it with (*It would have been nice to check the condition of the actual item beforehand.)
advantage
Plastic's Seat lock that has been deteriorating over time was partially scraped off, but it looks fine No Other Joint Parts (Photo No3) was on the verge of breaking in both places If I hadn't thought of replacing this product, I would have been unable to remove Seat at worst I'm glad
・Material:It's an aluminum Seat lock part, but it's solid and will last for a long time Item
I forgot to take a picture of the joint that is included in the package I forgot to take a picture of the joint with Key, but it's a little bit bigger than the original joint The shape is slippery and hard to break (Only one of them.)
The Instruction Manual is included in the package Then it's about 30 minutes of work (If you work on your own, you are responsible for your own work.)
Disadvantage
・Material:Aluminum Seat Lock products are a bit more expensive I think this is because I can't produce them myself, and the production process makes the price of gold more expensive That's why I'm happy with it It's a one-of-a-kind product because it's something that Makers don't produce
It would have been better if one of the joints had been included in the package (Normally, I don't need it because I divert it and use it, but if it's deteriorating, I'm not sure where they sell it No3Joint)
If you work on it yourself, there are many small parts, so when you install or remove it, the Bolt or parts fall off as it is easy to lose the parts in the event of an accident, you can quickly find the parts that have fallen by spreading a newspaper or the like on hand I think it's a good idea to do the work after
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
The product I wanted
Handlebar with Light switch, which I purchased at the same time as using High Solo I was having trouble with the Switch's Light switch because of poor contact with the Switch switch and sometimes the Light didn't turn on At times, I found this product and bought it... I want a High Solo, but I want it to look like an OEM I think it is a great product for those who View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
I was looking for SeatBlanket
I bought it to install on another company's Seat (OEMSeat is in storage.)
? The shape is different when viewed from the side, and the tip sometimes touches the body of the car body at different angles
Installed on the ?Seat and confirmed that the new Blanket on the Right Side is slightly longer sometimes The lock's bar can't be fixed, so you have to hold down Seat or else you're in a Pushing-Yang and Hook You may not be able to fix the Seat without sound, but after fixing it, you can use it with a good feeling without shaking It is
I didn't do anything with the shape in File
It's for the Other Brand ProductSeat, I think, but it's also for the two-seat Belt The fixed bolts were in a delicate place and could not be installed
View detail
Fits: KAWASAKI ZEPHYR750
It's only 5mm, but it's only 5mm
i made a semi-restored ZEPHYR boy as a Handlebar Up TypeSpec As a result, the Clutch is heavy! I don't know if it is because of the wire or not, but it is still heavy
I was hesitant because of the price, but the Clutch is heavy! It's a pity that it's only a hard-to-ride Motorcycle
I took the plunge and as a result, it's light as if the magic was lifted
It's only 5mm, but I take my hat off to the person who developed it
View detail
Fits: KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750
Quality product
Well made, quality switch. Fitted my 1992 Australian Zephyr 1100 no problem. Had to drill the handlebars for the locating pi View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX, KAWASAKI ZRX1100II, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400
It's easy!
I bought it to make it a High Solo
Other companies' products have a hazard switch or something else that's not necessary
I went with this one, which is the simplest
The seller is an OEMBase, so there's not a lot of Trouble and
It is the thing that can be attached to the coupler of ZrX1200 DAEG
The thing seems to be a Z1000 thing
I think it's cheaper to use OEM and make Wiring, but
WiringThe time was saved by not having to check and make it
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
I wish it was a little cheaper
This solves the problem of the ZEPHYR750 First Model Type
I wish the price was a little lower
I wish there was a Rose sale from 1 pc
View detail