Reviews
Excellent bite
This is for ACERBISClosedGuard.
Quantity by price:I think it is 1 Set for 1 Vehicle.
The structure allows for smooth installation without the Bolt spinning like other Adapters. (Not available in other Manufacturers) is caught and this ease of installation is created.
Of course, it can be installed on ACERBIS compatible products, but it is difficult to use it on other companies' products because the mounting hole of the Adapter needs to be enlarged to a long hole.
View detail
Fork leaking after 10 hours or so! 70 hours no maintenance!
Used in Enduro race.
Before the installation of this, the oil was leaking after about 10 hours due to small scratches from dirt and gravel, even though there was no contact with rocks, etc. The leakage stopped immediately, and there was no leakage for 70 hours.
The top part is made of black cloth which is easy to stretch by itself because it rubs easily.
Installation requires a bit of hang, but if you first pull the top rubber cloth extra tight and fasten it with magic tape before starting to close the bottom fastener, it will close to the top with ease.
My YZ is ForkInner and 30mm Lowdown, so in NORMAL, the bottom of the Inner Tube will be fully visible about 30mm below the Inner Tube.
The Cover part is made of PeLePera cloth and is easily torn, but even with a few holes, there are no problems with functionality after 70 hours of use. There is no Trouble such as roll-in, drop-out, or Gap.
It is machine washed in Net after each run and shows no deterioration due to washing.
View detail
Texture, durability, and the Exactly feel to the YZ250FX are all good!
'I am using it on a 21YZ250FX.
When used with the company's Fork Gaiter, it can be installed Exactly without gaps.
I bought it because as soon as it becomes an Enduro race, the Fork outer will be covered with a number of flying stones.
Installation should be easy for most car models due to the 4-part Magic tape.
It is not a mere rubber board, but has a three-dimensional woven pattern that gives it a high visual quality. However, if soil gets into the weave and dries out, it is a little strange to wash Large. It can be kept clean by scrubbing with water and Brush after each run.
I remove it every 20 hours or so, put it in the Net and wash it in the washing machine, but there is not even an atmosphere of damage.
I have used it for 90 hours and so far it has not peeled off during use, there is no deterioration or damage to the Rubber part or the Magic tape.
It's a reliable product
View detail
Nice and easy installation
It's easy to install, looks great, works, and works! View detail
The design and functionality are perfect!
The paint on the frame around the ankle area was peeling off due to friction from the boots, so I put it back on and it not only improved the design but also the gripping feeling around the ankle. View detail
It was as expected.
I bought it because I tend to grip the grips hard when touring or on the circuit and get blisters.
I think it is easier to use and more effective than similar products from KUSHITANI.
Most of these products are thin, but I think it would be good to have something thicker.
View detail
I don't get blisters on my hands.
Was the one you received as per Image?
I ordered Orange and am pleased with the color, which is exactly as shown in the picture.
It is nice to be able to choose Coloring, although it will be hidden from view by the Gloves.
[How did you feel about the Fit?
I use M SizeGloves and was Exactly in S/M Size.
If you are concerned about the thickness of your fingers or the back of your hand, you may want to use the Large size, but it is a stretchy material, so it is flexible.
How was your experience with it?
I used to get blisters on my hands when driving off-road, but this makes a big difference.
It helped me because I had no pain in my hand.
[Was there anything that disappointed you?
The price is reasonable and I have no complaints.
What are the specs of the product, such as protector?
Since it is worn under Gloves, nothing else is needed.
How did it compare to other products?
Other companies do not have many similar products, so thank you.
View detail
Strongest hand guard
[How is it used?
I had been using Zita's Hand guard, but I had a lot of Adapter loss and breakage, and Bolt breakage, so I decided to buy it with my senior's recommendation.
I use it as G650 XCOUNTRYfor Race.
Was the one you received as per Image?
There is no difference from the picture, but it is in a more solid and luxurious cosmetic box than I expected.
The box was made of such good paper that it could be used for anything.
Was the installation difficult?
Some TRAIL vehicles and handlebars are difficult to maneuver.
We need to avoid Wire and Hose in that way.
Because of the closed end, there is a possibility that it cannot be installed in the ideal position.
How was your experience with it?
It is very durable.
Even when it fell over in the gullies, it was only slightly distorted and the Adapter was safe.
It seems to be better to mount it tightly than to mount it loosely.
[Included Parts:were they on?
All parts necessary for installation are included.
All you need is a Hexagonal Wrench.
[Was there anything that disappointed you?
Closed end and robust, so it can't be helped, but if it handles a little better, well, if it doesn't fall over, it is Large sturdy…
View detail
Lightweight
The weapon of choice for Off cars is their light weight!
Most people want to put a heavy gold skid plate on it;
Material:Even Plastic is pretty sturdy when it's thick! If this thing cracks, I think you'd have to give it a lot of Damage to crack it!
It is a little disappointing that the engine oil has to be removed when changing the engine oil… but the installation and removal is easy with 4 Bolts, so I don't mind it.
View detail
Hand guard is the only choice.
[How is it used?
I bought a CRF125F and put my old hand guard on it, so I bought an additional one for my real car, an RM250.
In the past, I used to use a closed type hand guard attached to a bracket that grew from the ZETA Stem and used a solidly spec. that never turned the hand guard, but I decided not to use a solidly spec. that ignored the flexing characteristics of the handlebar, as it was tiring and caused my arms to However, I decided not to use the SolidlySpec. because it would tire me out and cause my arms to rise.
When I was looking for a hand guard that would protect levers without interfering with their bending characteristics, this was recommended to me and I have been using it ever since.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's easy, you're right about Bracket going around the bottom of MASTER. Sometimes I see brain-dead people who put it through the top.
How was your experience with it?
The handlebar is flexing even though it is closed! And it has the strength of Closed! It turns with the MASTER, so neither the MASTER nor the hand guard will break! It will not break even if you roll it with a lot of force!
And it's the best. Let's get rid of the aluminum hand guard.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I would be happy to buy Repair Parts.
We are trying to protect the TRI FIT that we are throwing away by asking around as much as possible to protect it and get the parts out of the way.
View detail
Stylishly.
[How is it used?
I was riding with Headlight Mask + BellowsBoots on my RM250 with upright suspension, but I often get mistaken for an RMX and BellowsBoots looked tacky, so I replaced them with this product.
I had worn them when I was riding my RM125 a long time ago, and I knew that they were very durable for the price, which was also a Point of my choice.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is not a magic tape fastening type, so you need to pull out the fork once and put it back on.
How was your experience with it?
Parenthesis is great.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have not yet taken it to a course where I would do Inner Tube like White well, so I don't know how well it protects it, but it is quite thick, so I think it will protect it.
View detail
It attached to Zep750 as a measure against protection against the cold. Since my motorcycle was already exchanged for a general-purpose handle, it was able to be attached by attached metal fittings. I think that the conformity check of the diamete
It attached to Zep750 as a measure against protection against the cold.
Since my motorcycle was already exchanged for a general-purpose handle, it was able to be attached by attached metal fittings.
I think that the conformity check of the diameter of a screw is required in the case of the pure handle which carries out the screw stop of the bar end.
Or and a portion is whether to exchange for the general-purpose handle of a cave.
Incidentally the diameter of an attachment bolt of an end part is Mxx.
Since I thought that there were also many directions which conformity (interference) worries, the photograph from a top was carried.
Although the brake side was exchanged for the radial master of Nissin and the clutch side was exchanged for the wire type hachis of AKOSATTO, it was able to attach satisfactorily especially.
Moreover, there is also no interference with a cowl (AR breaker).
Since it cannot say that it is completely calm about the protection-against-the-cold (protection against wind) effect since the area covered as appearance is small, but a hit of a wind can soften, it becomes comfort (comfortable) fairly.
although operative verification of a severe winter term has room for improvement -- the combined use with a winter glove -- the rudder of a fingertip -- seeing -- it is hoped that it may be eased.
Supposing it mentions negative implications, even if finishing (texture) of what has a strong configuration takes the average and the charge of ideas into consideration, it will just be going to be seemed that this price setting is high by it.
The rest is that handle width spreads.
Cautions are required in contacting neither other vehicles nor an obstruction.
if there is merely this frame part -- a commercial size -- I think that it also becomes a base when attaching a knuckle visor [ for the first time in ].
Many things were taken into consideration and the hit was made evaluation of three stars.
If it inquires towards a winter season, how is it?
View detail
Burn & Handle Measures
[How is it used?
It is used for CRF250RX.
Exhaust systems are not limited to this car model, but they are parts that get quite hot.
In the event of a fall, the Exhaust System is designed to prevent the body from being hit by the Exhaust System when it is stuck in the body of the vehicle.
Also, CRF250RX of 2022 model has no handle-like part on the Right Side of the body, and the cause of the problem is Large and strange.
By installing this, we can have an Exhaust System so that we can cause the Motorcycle to fall to the Right without difficulty.
Was the one you received as per Image?
As shown in the Image.:I was worried that it might melt because it is rubber, but as expected of Exclusive Design, there is no problem at all.
Was the installation difficult?
It's easy:Tie WrapQuantity:Just wrap it around with 2pcs and stop.
How was your experience with it?
It is much easier to cause. What would I do without it? I feel like, "What would I do if I didn't have it?
[Included Parts:were they on?
It came with a body, a Tie Wrap to hold it in place, and an ACERBIS Sticker.
[Was there anything that disappointed you?
No, I don't!
View detail
Minimizes skin problems from handlebar vibrations.
Snugly fits under gloves and makes it more comfortable to hold on to the bars for prolonged periods with a diminished risk for blisters. View detail
Easy to use, no matter which Handlebar you install!
Now installed and in use on CRF125F.
Minimoto has many hand guards that cannot be installed due to severe space and bending caused by the short length of the handlebar.
We purchased this product because of its ingenious Bracket routing and angle, and because we were able to confirm that it could be installed on Minimoto.
Since there is no aluminum, etc. in the product, it is lightweight, as expected.
I really like that the Handling is not too heavy.
Although the Guard itself is not as strong as the Gold products, it can be installed in such a way that it does not fasten to Solidly but rotates moderately when impacted.
Therefore, even after several falls, the Brake/ClutchLever was able to protect it well without breaking.
The price is very good for a hand guard and I am very satisfied with the functionality. I would have given it 5 stars if the price was a little lower.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
Difficult to install. Water pump is exposed.
I purchased the Link guard for my YZ that I use for Enduro race because it is easy to install.
The factory installation of the front side was easy to gap by hooking the M-shaped bar to the frame, and the installation was also a little troublesome, so we drilled holes and used the same installation method as the OEM.
The water pump is exposed, so I installed the aluminum cover myself.
Only the crucial Link guard was ponied up with Zita's. 、、、、、
View detail
It will be active for smartphone navigation to forest roads and for Accessory Case.
Purchase driven by need for smartphone Navigation to forest roads.
I was worried that the Smartphone Holder attached to the handlebar would fall off, and I am not a fan of inexpensive for-motorcycle products, so I bought the ACERBIS one.
I thought ACERBIS had a nice design to put on Back or Rear to attach to Fender, but this product has a different design and seems a bit plain.
The tool box inside seemed a bit cheap, but I think it is very practical. I put tools and a 600ml plastic bottle in it, and it was full.
I guess tools and cigarettes are just fine.
View detail
CRF50F.
Installed on CRF50F Small School 3rd-6th Grade Spec.
The size is perfect, but the mount part is silver-colored resin, not aluminum.
However, considering the fact that these parts are designed for kids, I think resin is the right choice in terms of forearm entrapment accidents (bone fractures).
I could feel the kindness of ACERBIS towards KidsRider!
View detail
Mounting on WR 250X
I have a FMF Q4 and it hits the Silencer when it falls to the Right, so I installed it as a protection in case it falls over. View detail
The position of the drain bolt does not match. The position of each bolt is also slightly different. Too bad.
I regret buying it. Too bad about the Bolt position and hole location, as cool as it looks on the outside. View detail