Reviews
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON S&S X-WEDGE Engine
In preparation for vehicle inspection
The gasket of the exhaust pipe had not been changed for decades, and since it was rare to remove the exhaust pipe, it had been overlooked. As expected, the Gasket had not been changed for decades, so it had almost lost its function. I have to do a thorough check once in a while. View detail
Necessary and sufficient. Pay attention to screw specifications
I tightened it at 50Nm with no problem.
Deep socket is required because the screw is longer than OEM Product.
(15mm is recommended for 5/8inch because it has a large rattling.)
View detail
Fits: HARLEY-DAVIDSON FXBB, HARLEY-DAVIDSON FXBBS, HARLEY-DAVIDSON FXBR, HARLEY-DAVIDSON FXBRS, HARLEY-DAVIDSON FXST, HARLEY-DAVIDSON FXBR, HARLEY-DAVIDSON FXBBS
very good
Easy to install, cost performance is satisfactory. View detail
Neofactory NeoFACTORY Regulator 94-03y
I used to use Brand from a different store, but this is the first time I bought this one.
I think it is a good product with gold connections, and I would be happy if it lasts about 5 years, but I can't afford ASKUL or other high-end products, so I'll test its durability here.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
FXDC DYNA SUPER GLIDE CUSTOMExhaust pipe replacement
I reuse it twice or so, but it gradually loses its elasticity due to rust, etc., so I replace it. View detail
It is an eye opener!
I own an Indian Pursuit and have had many occasions when I wanted to stand my motorcycle upright for maintenance and customization.
It is convenient and I wish I had purchased it earlier.
View detail
Very good quality and satisfactory
Used for SHOEI's ex-zero.
I was looking for a Visor as large as OEMParts and came across this product.
Since the price was less than half of the OEM price, I did not have such high expectations, but when I picked it up, I found that there was no BALI on the edge and the clasp was well made with no possibility of coming off.
Visor is just about the right length, just above the field of view, and does not interfere with the view.
It requires quite a bit of force to install and hang and force to remove.
After installing it, the Helmet and Visor balanced well and looked much cooler.
I haven't actually used it yet, but it is so solid that I can't imagine it flying away in the wind while driving.
If I use it and have problems, I will add a note.
View detail
Easy to grip!
[How is it used?
busy
Was the one you received as per Image?
Street Image
Was the installation difficult?
This was my first time replacing a lever on a Harley, but it was easy since all I had to do was pull the pin.
How was your experience with it?
I had the impression that the thin one was easier to grip than Harley's thicker Lever.
[Included Parts:were they on?
Reinforcement Spring
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
important point
⇒Pivot pin is hard to pull out without a tool.
View detail
Fits: Others 35mm diameter for Front Fork
Used for NSR50 front fork
There was an old fashioned method of putting a 10-yen coin in the front fork to harden the spring of the front fork, but instead of that, I put this in.
I wasn't sure if the damping was stiffer or not from a tactile point of view, so I feel that two or three cards should be included.
View detail
Fits: HARLEY-DAVIDSON Most big twin XL1200C SPORTSTER 1200
XL1200C SPORTSTER 1200 XL1200N
I purchased this product because the OEM Rear brake switch broke.
To replace, remove the OEM and wrap seal tape around this product and screw it in place of the OEM.
The replacement itself is very easy as no wiring processing is required.
Brake fluid leaks a little during replacement, so it is necessary to add Fluid and bleed air.
I like it in Compact and expect it to be durable.
View detail
This is not a Universal Product.
It could not be attached to all of the helmets we have, and we felt it was very ununiversal.
The material may be acrylic, but it is easily scratched.
View detail
Used for fuel setting
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
Required for MotorcycleMaintenance
I have been using a slotted screwdriveretc. to muddy my brown, but I bought this to replace a set of seals on my Caliper. Finally, I can replace seals without damaging them here and there. View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
buy grip red
Good grip and comfortable to use.
Best of all, the fit is great.
It fits perfectly on the handle and is used well.
Grips must be purchased to fit the handle well.
It would be perfect if you buy it by referring to the purchased photo.
I'm driving an 883r and it fits perfectly here. -------------------------------------------------- -------- Grip feel good and good. Above all, the fit is good. I use it well for the handle. The grip must be purchased well with the handle. It would be nice to buy the purchased picture and buy it. I'm driving the 883R, but it's perfect here. Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON V-RODFamily
Grip replacement
I like it because it is very easy to grip. View detail
Fits: HARLEY-DAVIDSON Universal
Cospa high
It's very cost effective.
Long and easy to operate
Good texture.
View detail
แผ่นป้ายงานดี สวยงามมากคับ View detail
Used for fuel setting
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
On a ball run out.
I bought this for replacement because the bulb was out!
It was fixed normally!
View detail
Versatile Tool for your Spark Plug Maintenance Needs
About quality and texture: I am happy with the quality of the spark plug gap tool from Lisle, made from a steel construction with the assembly secured with rivets. About the feeling of use: I have used this tool to correctly measure and adjust the gapping of my spark plugs quickly and accurately. The combination of the measurement wires and adjustment tabs makes this tool very versatile for spark plug maintenance needs. Products to buy together: Some more tooling like a tappet adjustment wrench would also be desirable to purchase along side the spark plug gap tool to simplify these processes when it comes time for your annual maintenance. Difficulty of installation: The process to install takes a few minutes, place the measurement wire between the center electrode and ground electrode to obtain the clearance and use the adjustment tab to open or close the gap by adjusting the ground electrode. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made spark plug gap tool from Lisle that has with stood numerous usage without failure and much quicker and easier to use and read then feeler guages. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Good for common sized gaps but may not be suitable for every situation unlike a set of feeler guages. View detail