Reviews
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
For fuel setting.
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
To remove the Primary.
Used to remove Primary.
It is rather expensive but easy to use.
View detail
Indicator bulb out of service.
It was used due to a broken bulb in Indicator.
It's working fine
View detail
Fits: HARLEY-DAVIDSON Universal
The longer it is, the easier it is to see!
I couldn't see the short Type's so I bought the long ones.
Easy to see!
View detail
It arrived quickly as usual. Reliable store.
It is a Seal kit, so there is no particular imprint.
The store took care of it and installed it with no problems.
View detail
กระจกมองข้างทรงกลมพร้อมขาหนีบเพิ่มลูกเล่นใหม่ให้แก่ตัวรถจักรยานยนต์ของคุณ รายละเอียดสินค้ามีความเงาและชุบโครเมี่ยมที่ดี View detail
Fits: HARLEY-DAVIDSON Universal
It is almost invisible.
If you are only looking at it, you will be satisfied, but not as a Mirror.
You have to twist your body to see behind you.
View detail
Fits: HARLEY-DAVIDSON FL 55-72, HARLEY-DAVIDSON SPORTSTERFamily
The material is plastic, but strong and beautiful. Wiring should consult a skilled technician. View detail
for storing wires or cables as needed It is chrome color, the material is springy, easy to use. View detail
Fits: HARLEY-DAVIDSON FLHR, HARLEY-DAVIDSON FLHT, HARLEY-DAVIDSON FLHX, HARLEY-DAVIDSON FLTR, HARLEY-DAVIDSON SOFTAIL model
Compact LED Blinker
[How is it used?
I replaced Harley's standard Blinker with this one.
The handlebar area looks nice and clean.
Was the one you received as per Image?
I wanted a blinker that was not too small and not too large.
Was the installation difficult?
If you know the Plus and Minus of BlinkerWiring, there is no problem.
How was your experience with it?
As desired!
[Included Parts:were they on?
Splice Terminal and Heat Shrink Tube are not included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
If you want to Custom without cutting OEMWire, you can buy AWG26 Wire and OEMConnector and terminals or Harley's BlinkerExtension Harness.
View detail
![[ULTRA COOL(UltraCool)]Side mount Oil cooler system](https://img.webike-cdn.net/catalogue/images/115332/115332_L023554_TS.jpg)
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200
Effective
The design is rugged and not a good parenthesis, but it works.
Oil was Pine Valley PlatinumOil, Tuning was FP3, 21-year old Forty-Eight, and when not cooled, the oil temperature exceeded 115°C at high speed cruising and up to 125°C in mid-summer traffic.
After installing the oil cooler, the temperature rises to 110°C when driving,
The fan starts around 110°C and keeps the temperature at 100-110°C even in traffic (when stopped). *Oil temperature is measured using HDOEM's Oil Temperature MeterDip stick.
UltraCool products would be great if they were 2/3 the price.
View detail
The flanged style O2 sensor bung allows for an easier and cleaner weld
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, The flanged style O2 sensor bung allows for an easier and cleaner weld. A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a smarter design to easily secure it to the exhaust pipe with a clean weld. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe
About quality and texture, I can confirm that the quality is great and that the material used is raw finished cold rolled steel. About the feeling of use, A necessary addition to allow for the installation of an O2 sensor onto the exhaust pipe. Perfectly sized to allow for welding and threaded to accept the DynoJet wideband O2 sensor. Products to buy together, To allow for the sealing of this O2 sensor bung once the tuning has been completed and the wideband O2 sensor removed, it would be ideal to add a O2 sensor plug bolt to your cart. Difficulty of installation, I can say the fitment of the O2 sensor bung was out of my capabilities as I cannot weld. I marked the desired location then removed the exhaust pipe and took it to my local fabricator to have it welded into place.Cost performance and comparison with other products, The pricing of the product is great. You receive a cheap O2 sensor bung made of a suitable material with a simple design to secure to the exhaust pipe. Other brands offer higher priced options but I am satisfied with my choice. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
![[JAPAN DRAG] Fabulous Hyper Oil Filter Plane](https://img.webike-cdn.net/catalogue/images/115332/115332_L016931_TS.jpg)
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
Used for 4-speed XL1200C SPORTSTER 1200
I installed it on a 1983 4-speed XL1200C SPORTSTER 1200 through a SUNDANCE Adapter. I have not run any distance since installation, so I can only give a standard rating for long-lasting performance. The cost is a little high for an oil filter, so I would like to judge it at the next oil replacement. View detail
There is BALI and it's dangerous.
As per the Title. I have no problem using it, but there is a lot of BALI and I almost cut my hand accidentally.
It is strongly recommended to remove the BALI by sandpaper, etc. before use.
This product is a recommendation because it will not burn or scorch the Motorcycle Cover when riding!
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily
In reserve.
It is a relief to have it as a spare. The quality is also fine. View detail
![[JOYRide inc.] Exhaust Bent Pipe](https://img.webike-cdn.net/catalogue/images/115332/115332_L018103_TS.jpg)
For Exhaust System production
Used to make an exhaust system for a YamahaXV750E.
The Pipe itself is an ordinary steel Pipe.
However, the 38mm, 42.7mm, 45mm, 50.8mm, etc. that are generally used for exhaust systems are all available.
The bending angle can also be selected by about 10°.
If you are able to measure well, you may be able to make it with just Cut and weld.
In my case, there were numerous areas where I wanted to make some of the curves tighter, so I ended up chopping them up, but I think a normal under-turned Exhaust System can be made to look good.
Welding was also easy because the roundness was kept almost perfect, including the bending parts.
The Cut on the end face is also well vertical, so if the part can be used as is, you will be happy.
View detail