Reviews
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
I really like it
I bought it to replace the fuel filter that I was using before because it got old
At first I didn't like the shape and the White color, but it was cheap, so I gave it a try
When you actually use it, the color was white but it became transparent like the photo, and the size is also It's small and unobtrusive and I like it a lot now Old cars will inevitably have Rust in the carburetor in the tank, so this product is a good choice It is recommended that you install it
View detail
A must-have for older vehicles
What made you decide to buy? low price
How was your experience with it? Fuel Cock's Strainer is in a state of decay due to the yearly wave of the carburetor The carburetor is clogged with Garbage! and Large weird So far it's working fine
Was it difficult to install? (In the case of hard parts) Even the OEM Hose fits in tightly If you have a hard installation, you can use Silicon Spray
What is the point or hang of installation (for hard parts)? Clip it on to make it more secure
How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
[Was there anything that disappointed you? It's also very durable, and Plastic doesn't fog up
Do you have any wishes or improvements you would like to make for the Manufacturer? None
[Do you have any products to compare it to? Guts Chrome
[Others] Any
View detail
It's not useful
We have a PinGelCook-equipped vehicle and expect it to look and function like a PinGelCook
Purchased
It was good for the look and handling of the Fuel Hose, but I installed it and tried it out, but it was not good enough for many times also lacked Gas
I couldn't drive it properly, so I removed it and it was fine
It is now possible to run
There seems to be a problem with the Material in the Filter inside
It was quite a Gold amount, so it's a shame it's not useful
The carburetor installed is the Vito FCR Carburetor Body 39
For the Racing cab, this filter is available in
I think it's unsuitable
View detail
Compact, no trouble with places
I was troubled by things with 7 mm inside diameter, but I found this item, purchased. The product is very small and it does not bother the place and the Hose Band is solid. View detail
gasoline filter
Gasoline filter from kijima, the filter can filter fuel well. Can collect unwanted dust and debris from the added fuel. A gas filter from the kijima filter can filter the fuel well. Can collect dust and unwanted particles from the fuel. To not enter the ID system as well.(translated by Google Translator) View detail
gasoline filter
Gasoline filter from kijima. The filter uses good materials. Benzene is not corrosive. The inner filter captures dust and debris very well. Small, compact, easy to install Filtered gasoline from kijima filter material well. Gasoline is not corrosive. The inner filter can trap dust and debris. Small, easy to install.(translated by Google Translator) View detail
It work perfectly
I got this part from my friend as a gift, it work perfectly with high finished material and so clear to see fuel inside. I should thank him because a gift and introduce me to Webike, wow a huge high quality part was here. View detail
Compact It's okay to see the contents inside!
It is being used for Fuel fliter of VANVAN 90.
I used a similar Filter before.
Fuel Hose of VANVAN 90 has an inner diameter of 6 mm.
I think Filter 's eyes are also fine so I can see the condition of the Compact soup stock.
Just because the plastic body can not avoid deterioration, it may be better to change if Body comes with Yellow.
It looks like it's getting warmed up hotly ~ (Lol)
View detail
Fantasic value
Kitaco Racing parts provide fantastic value for money. These parts are extremely affordable, but the build quality and design are great. You can upgrade your engine room both performance wise as well as aesthetically, with little money. View detail
good
I bought it to carburetor so that rust, Garbage will not go. It's easy to install, and it's a good item because you can also check the flow of Gasoline. I am using it for CB 750. View detail
kijima gasoline filter
The kijima gasoline filter is a good quality filter. The large diameter makes the oil flow more flexible. Replace oil filter replace filter sealing kijima, Ben is good quality. Sunklang large diameter oil flow mobility. And there is rust scrap magnet helps with. Translated by Microsoft Translator View detail
Daytona oil filter
The fuel filter from Daytona. The exterior of the filter is plastic, it's strong, and it doesn't break after long exposure to fuel. The inner fuel filter can filter the oil from the fuel tank sent to the carburetor is relatively clean. Daytona Fuel Filters The outside of the filter is plastic, it is strong when the fuel is long, it is not cracked. The inner fuel filter can filter the fuel from the fuel tank to a very clean carburetor. (translated by Google Translator) View detail
Kijima Gasoline Filter 105-221
I bought the Kijima 105-221 gasoline inline filter for 1980 Honda CB650Z. The fuel pipe is 6mm diameter and fits snugly on both ends. However the clamp area could be a bit longer to ease the clamp fitment. The filter is very well made with high quality plastic and the the filter material seems to be some kind of ceramic but filter very well without reducing the fuel flow substantially. Good price and will definitely use kijima gasoline filter again. View detail
I am using paper Filter × 2
Initially it was used by replacing the ones of Gold Genus Mesh Type which can be washed and reused with those of OEM.
After a while checking it, the dirt was hardly accumulated, so than Tank's rust - I thought that dirt is small. Moreover, looking for a while for a while, a little rust accumulated, but leave as it is. And when I looked at it for a while, the rust accumulated was gone.
I thought this was!! I was surprised to open carburetor! It was covered with dirt. Gold genus Mesh Type is almost a monkey. It seems that if you leave neglected dirt, it will crush it finely.
After that, when changed to paper Filter type, the contamination of carburetor drastically decreased. Since it can be confirmed that dirt is also accumulated firmly in the Clear case, it is exchanged when dirt increases.
I use it now between Tank and Pump, between Pump and carburetor, but in two places, Pump - It is quite a beauty condition between carburetors.
Evaluation performance - It is a minute of the Gold genus Mesh Type.
View detail
Peace of mind
At the moment, Fuel Filter which is made similarly is also inexpensive, but still the thing of FOR JAPAN MODEL Manufacturer can be relieved. First of all, I think that there is no doubt that the part inside is Brass, although it is slightly expensive.
By the way, because it is made of Glass, it will crack if you tighten it too much when assembling with Rose.
View detail
That's not a good thing.
Since it is an old Motorcycle, soiling in the Fuel Tank is anxious, so I attached the Fuel Filter to filter it.
With this I am relieved, it's possible to do it for about 15 minutes working time ~ (゚∀゚)
View detail
Foreign matter from CUB preliminary Tan - - - -
As it entered Carburetor in Moro, it was scrubbing and washing.
Although it was trivial Large, I thought about the future, but since then it has moved without problems.
View detail
It may be too large for SR 400
Because OEMFuel Cock of SR400 is φ6 and FCR Carburetor Body is φ8, I thought that there is a filter which also serves as a conversion connector and I bought this product for φ6 φ 8, but I am surprised to hear that the Large is large and Fuel Hose kinks between Cook and carburetor I did it.. Capacity is Large, so it may be good if you are assembling FCR Carburetor Body with other car models, but SR 400 is a Large rinse. View detail
~ Subtle
I installed it because Tank had Rust.
When decomposing, there are always so many Rusts in the Float room that are reasonably large.
I will make it a paper Filter.
View detail
Is it reasonable?
When Fuel Cock was set to Reserve, it seems that rust accumulated suddenly Jet got clogged suddenly and cleaned but because I can not afford to clean the Tank I put Filter as a temporary measure for the time being!
It is safe for the time being because rust is tightly cut off!
I think that you can check the accumulation state because it is transparent!
View detail