Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
A very ordinary Halogen bulb.
Whenever I buy a used Motorcycle, I always replace all the valves with new ones, but since they were out of stock at my local store, I couldn't be bothered to come back to the store, so I bought them by mail order.
I thought the price might be a little higher than the actual store. I thought the price might be a little higher than in the actual store, but considering the time and effort involved, it was acceptable.
There is nothing wrong with the fit and there is nothing special to say about the color.
This is fine unless you don't want the Amber color to stand out over the Lens.
I thought it might be a good idea to purchase an additional one as a spare when I purchase some more Parts.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Necessary and sufficient
Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.
Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.
Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.
The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.
Recommended for those who require ease of installation and reliability due to simple construction.
View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
Careful with Size, but if it fits, it's easy!
Used for TW200E
The previous Owner has been playing around with things, so the Headlight is unknown what the OEM one is, but it fits the Limit and was very easy to install.
The head seems to be 20mm longer than the OEM Product, so size confirmation is essential.
View detail
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Replaced with Pine Stripe LED Headlight for mopeds
The NORMAL Halogen was too dark and I was afraid to drive at night, so I replaced it with Mats Stripe's LED Headlight this time.
Installation was very easy and took about 15 minutes.
I ride a white motorcycle, so I am satisfied with the white light and the body color.
I am glad I replaced them because they are more visible on the road at night.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Anyway, it's bright.
Used for GYRO CANOPY (TA03).
CANOPY is bright anyway, partly because it is a two-light system.
Light distribution is not bad.
Now we are hoping for durability.
View detail
SR400 Tail with a modern look
The LED's characteristic sparkling light will also increase visibility. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
It is safer to always have it at home with Spare!
The cheap Pine Stripe bulbs, but just one of these can cause a maintenance failure!
They run out without notice, so it's always safer to have one in reserve.
Depending on the model of car, the replacement work is a single +Driver.
View detail
Replace from old Type
Purchased to set CIBIELight180Π's Position to T10.
Since the wiring is the same as the original, it was easy to process and fit perfectly into the original Rubber frame.
The texture is not bad, so I think the cosmetics are good.
View detail
Rare 6V bulb
I used it to repair a broken Neutral lamp on a VANVAN90 that was given to me by a friend's father.
Since it is an old motorcycle, there are no parts available, so the rare 6v bulb is a big help.
View detail
Privileges of old cars
I have been interested in Yellow Bulb for a long time. I chose this one because I wanted to get a k true Yellow color anyway, and it is expensive. The price is expensive, but I checked the brightness on Tunnel and it is better than OEM.
Privilege of an old car?Does it stand out?
View detail
It's good.
It's hard to tell from the picture, but it's a power-saving, sharp, and reliable License Plate Light made by a famous Japanese manufacturer, so you can use it with confidence.
This product. Expensive!" If you are saying, "I am not sure. I think it is better to buy a high quality Valve from Japan, even if it is expensive, than to buy a cheap, low quality Valve from a certain country and replace it many times, which is definitely better in the total.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
30W floating.
I have been using it for about a week.
Light is M&H Maz StripeB2 on DMR-JAPAN Multi-reflector used for about 2 years. [Color] Clear (35/36.5w) This is a change from
Direct AC compatible, so it is also compatible with KSR with half-wave rectification.
It blinks in Idling, but lights up normally when the rotation is up.
As for the depth in the Light, there seems to be room for about 5mm.
So far no discoloration deformation etc. of the Lens section, no thermal problems.
I feel it is brighter, but my impression is that it is too White for me and not easy to see.
I would replace it immediately if a VERSION with a lower color temperature is available. (4000-5000K)
Halogen → I floated about 30W with LEDs, so I will be able to increase my warming equipment for winter.
View detail
Fits: APRILIA RS50, BENELLI Velvet125, HONDA XR400R, HONDA XR600, KYMCO TOPBOY100, KYMCO TOP BOY 50, SUZUKI GN125, SUZUKI GS125, YAMAHA FZR1000, YAMAHA FZR1000, YAMAHA TDR125, YAMAHA TW125, YAMAHA TZR125, KYMCO MOVIE XL150, YAMAHA TZR50, その他 , APRILIA LEONARDO150, APRILIA RST1000 FUTURA, BENELLI Velvet125, BENELLI VELVET125
Small but satisfactory
[How is it used?
Installed on a Motorcycle for commuting.
Was the one you received as per Image?
Image
Was the installation difficult?
It was easy to replace the one we were using.
I was careful only there because I could not touch it with my bare hands.
How was your experience with it?
It is darker than before, but it is not a problem because Level is not troubled at night.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
Not so much a disappointment, but the simple packaging made me feel a little uneasy.
View detail
Yellow colored Headlight is effective to protect yourself
LED Bulb is bright and good, but Multi Reflector Light and Color:The light leaking from the gap where YellowFilm was applied was too White and felt uncomfortable. Therefore, I decided to use ColorFilm this time.:I tried YellowHalogen bulb.
Color:The light seen through the gaps in the YellowFilm is now a solid yellow color and no longer feels uncomfortable.
Frankly, it is a bit expensive for a light bulb, but it is highly self-satisfying.
The KSR110 is a good motorcycle with a small body and quiet exhaust.
This is clearly less likely to be the case, perhaps because Yellow Bulb allows us to be more alert. Perhaps the biggest advantage is this.
We would like to recommend this product to Small Type Motorcycle riders, but the Yellow Bulb can only be used on vehicles manufactured before December 31, 2005. Please be careful.
View detail
Fits: Others
Convenient items that save you time and effort
Since the LED Blinker was made into a Hazard by the Pilot, it is a time saver, considering the time and effort required, rather than having a rectifying Diode, Wiring, Heat Shrink Tube, and Bullet Terminal.
In my case, I decided that making a wiring was better than machining a wiring for a vehicle in a small space, so I used broken T5Socket components to make a complete set.
Merit is that it can be returned to full normal when TroubleShoeing.
Demerit is that it takes a lot of time and effort to fit in a lot of wiring.
Please refer to the photos for reference.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
About our products
The product is the same as the Valve I have used before, so no problem.
Cost performance is very good.
I would definitely use them again if the opportunity arises.
View detail