Reviews
Easy to use! Nice!
Easy to use! Better to use a longer wrench while using! The instruction is clear to understand! Remember to read the instruction carefully or watch the DID YouTube channel before changing the chain! View detail
First Chain Exchange
I was looking for a tool for my first Chain replacement.
There are well-known tools for Chain replacement, but they are expensive and infrequently used tools, so I was looking for something cheaper. I was looking for a cheaper tool and found this one.
I was worried because it was my first time, but I was able to replace it without any problems.
View detail
Note that it is Closed End.
I bought this one from a famous manufacturer because I couldn't find a position where the rattles were large enough with a cheap tool.
I wish there was something like a die-cut sponge.
The compactness of the tool without the handlebar section is also good since it is used infrequently.
However, a 27mm Wrench is needed as a replacement for the handlebar, and since it is not fixed, it comes off every time it is tilted, which is depressing, and the tightening side is 19mm.
The screw that holds the piece in place has a minus head, but it is not easy to work with, so I would like it to be hexagonal.
The other company's product has an open end, so it can be worked after the Sprocket, but this one has a closed end, so it must be worked under the Swing Arm, which makes it difficult to apply force, and depending on the shape of the Swing Arm, it may be even more difficult to work on.
This makes the rigidity of the Tool and the fixation and positioning of the Plate easier.
The product was considerably better than the cheap ones but could be improved in many ways.
View detail
First Chain exchange procured.
I procured this on my first Chain exchange.
Tools that cost as much as $10,000…
Huh? Do I really have to buy it? I thought so and checked other tools, but reluctantly prepared Kashimaru-kun-san because I was worried about its quality.
As a result, it was the right decision to buy Large.
The video is also available on youtube with the manual of the work, so please study it carefully before you start the work.
It took us about an hour to finish the Chain exchange.
The tool has a guide to avoid mistakes, and as long as the Chain is aligned with the guide, you can proceed without fail.
I bought Spare's Joint and never used it.
View detail
My First Chae Exchange
It was my first time to exchange a chain, but DID provide a video on YouTube showing how to use it, so I was able to do the work without making any mistakes. View detail
I can do it with one of these.
[How is it used?
I used it to replace Chain
Was the one you received as per Image?
Image
How was your experience with it?
Easy to replace
[Points to note]
Cannot be used without 27mmGlasses
Items to be purchased together are 27mm Glasses
View detail
DRC Chain tool PRO
When replacing a seal chain, if you can pull out the pin at the crimp part of the chain and crush the head of the pin at the joint part to make it tight, there is nothing to be afraid of! Based on my experience of replacing a chain when I was riding a 250, I chose DRC's product in search of a tool that could be used safely for replacing a chain on a large motorcycle.
The pin can be stored in the handlebar when stowed, and the large size of each part is appropriate and easy to use. The price is not that expensive, so I also appreciate the ease of access to the product.
I think Chain replacement should be a time-consuming and careful process, so it is also suitable for those who want to take their time.
We will examine the durability of the product in the future with the expectation that it will last for a long time.
View detail
Easier to use than I expected.
First Chain Exchange
It was RK's Chain and it was fine.
There is a video on YouTube from DID on how to use it.
Use it exactly like that and you're good to go!
View detail
It's also heavy.
I have not used it yet, but I think the thing is very well made. I was worried about buying an inexpensive tool, but I was right in buying this product. It looks like I can use it for a long time. The storage case is stylish too! View detail
Chain tool
Crimp and Cut are also easy to do.
The Plate that is pressed down when press fitting is a little gapped and the Plating has peeled off a little, but the function is excellent.
View detail
Used for first Chain exchange
I used this tool for my first Chain replacement with no difficulty. [Color] Clear is ready! View detail
I did it, so I bought it.
I used Kashimaru-kun to Cut&Crimp the 520Chain I purchased because it was a bit long.
…… made a mistake in using it when Crimping and broke the Pin.
So when you Cut, you do it on the Pin side, and when you Crimp, you flip the Crimp pin over lol.
After I folded it, I learned about it when I was told about it.
To be honest, it looked like it was going to break when I cut it, so I shaved the tip of the Pin with Belt Thunder before cutting it.
Incidentally, this Crimp&Pin Cutter is made of extremely hard Gold.
It cracks without bending.
It has already cracked really crisply and cleanly.
Well, I thought it would be a good idea to buy it, but I laughed at the very good price.
Even though it is a special Parts, such a small Parts is 2,000 yen for 1 pc.
I really wanted to use Large next time.
View detail
Purchased in conjunction with Chain replacement
[How is it used?
Purchased in conjunction with Chain and Sprocket exchange
Was the one you received as per Image?
Yes
How was your experience with it?
Easy to use
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Dedicated tool is love
I saw a case of failure because there was no dedicated tool for did, and there is an existing tool, but I purchased it additionally. It was the best choice, and I have no regrets. Strongly recommend. View detail
Even better if it's cheap.
It's pretty easy to use, and it's solid, so unless you're really bad at it, there's no chance of damage or other mistakes.
If you watch the video on the product page, you will have even more problems.
I just wish it was a little cheaper.
View detail
Thank goodness for Repair Parts!
It's been a while since I used it, but I crimped with the stick when I crimped.
It snapped off beautifully. (Lol)
Well, you're gonna break it;
I was looking at the Instruction Manual …
I didn't need to see it to know how to use it. LOL
It's strictly forbidden to work while looking at the instruction manual at random.
It was really helpful to have Repair Parts.
Thank you, Mr. Daido.
This time, though, Chain is Enuma. (Lol)
View detail
Thank goodness for Repair Parts!
[How is it used?
Chain tool of DRC (https://www.webike.net/sd/22054739/) Repair Parts.
I bought this because I made a mistake in using it and bent the original Pin that was there.
Was the one you received as per Image?
The product was as shown in the pictures.
Different Diameter Quantity:It contains 2pc CutPin.
How was your experience with it?
It is natural because it is from the same Manufacturer, but there was no problem at all.
I'm sure it won't basically bend right away if you use it normally, but Repair Parts was a big help.
[Points to note]
I think it's more important to make sure you cut down the Chain's Pin before using the CutPin.
It is often explained how to shave the head of a pin with a grinder or something like that, but is it a normal stick? A board? You can shave the head of the pin with a file for about 5 minutes.
How did it compare to other products?
I bought this product without comparing it with other products, but the standard is unified to some extent...?
The shape is the same, and I don't think it can be used by other manufacturers, but the one of the same manufacturer is cheap.
【Review】
Compared to the CutPin that comes with the original, there is a difference between the triangular or flat butt side, but there is no problem at all in using it.
When I bent the pin, I was in a hurry to see what I would do if I didn't get Repair Parts, but I'm glad I was able to purchase them safely.
View detail
very good
It is a very difficult situation because the rivet parts are easily broken during work with oo's other inexpensive products.
After ordering DID products in a hurry, it is easy to finish the work.
DID products are very sophisticated and sturdy. I like it very much. ------------------------------------------------------------ -------- It is a very difficult situation because the rivet parts are easily broken during work with other inexpensive products of the company.
After ordering the DID product in a hurry, the work is easily completed.
DID product is very sophisticated and durable. I like it very much.
View detail
Standard Chain Cut/Caulking Tool
Used for Cut and Crimp in 525Chain.
This is a special tool for the standard Chain.
It is made by D.I.D. but can be used for non-D.I.D. Chain.
In addition to this product, please use the following
27mm GlassesorSpanner
19mm GlassesorSpannerorSocket tool
is required
It is recommended to prepare a tool with some length because it takes a certain amount of force when crimping.
As for the cut, the 525 size OEM chain was able to be removed without any difficulty by skipping the head of the pin.
When I google how to skip the head, I get the impression that a lot of people use Grinder, but if you are so inclined, you can also use a bar file for ironwork.
I went with Leutor and was able to cut it down to a tura in a couple of minutes.
Probably if you skip this step, the Pin corruption Risk will jump up…
However, some chain manufacturers provide the dimensions on their website so that the amount of press-fitting and crimping can be managed quantitatively.
If you check this and manage it properly with Caliper etc., even a beginner can complete the work accurately.
D.I.D→http://didmc.com/chain/sizemeyasu
RK→https://mc.rk-japan.co.jp/wp-content/uploads/kashime.pdf
Drive chain is sold in the store at almost a fixed price, while Net mail order is sold at a considerable discount rate to ConStunt.
The Merit of self-maintenance is the Large Threshold, not only because of the labor cost reduction, but also because the same parts can be obtained at a discount.
However, the chain is an important security part, so you should prepare a reliable tool like this product and ask for help from someone who is familiar with the chain.
View detail
OEM tools are reliable.
Since we are using DID's Chain, we used Kasimaru to exchange Chain.
This is an OEM tool, and the matching against the Chain is perfect.
If the chain breaks, it could be a Large accident, so you can work with OEM tools with confidence and enjoy riding with peace of mind.
View detail