Reviews
Light and functional
The design was flashy compared to other things, and since the motorcycle is CRF250M RedBlack, I decided on this color to match it. The actual product was also as Image.
The size is L if it is Size of FOR JAPAN MODELManufacturer, but it was XL in Zealot. The interior of the Helmet had a speaker hole so it was very easy to put on the Income when touring.
Even though it is an Off-Road Helmet, I thought it was suitable for Touring.
The Visor is easily removable and has a seal on the inside to reduce light reflection. I used it a few times with two rigs and it was fine.
View detail
Order Cancellation Request
There's an email about a delay in receiving the product.
We will cancel your reservation.
I look forward to working with you.
View detail
I hadn't noticed it before, but it's a good Helmet
I was looking for an affordable helmet for commuting and mountain activities when I found AnswerHelmet at a reasonable price. The AR1Series from Answer is just as good as the Bell, Fox, scott350evo, etc. I like the heavy design, but the AR1Series from Answer is just as good. The construction is good. I've found a good one. View detail
I was attracted by the lightness anyway.
I use the Jet Helmet for my normal woods and Trekking, but I wanted a full-featured one for the occasional Course ride.
I was gathering information on the Net and came across this Helmet.
I'm afraid that I have to try on things that I'm going to wear, and if I do, I'm going to buy them in that store.
It was not purchased by Webig, but I think that there are many people who are interested in it, so I will give a light impression.
There is no difference in appearance between the photo and the real thing, and I think it is cool normally though there is a preference in the VFX-like Design of SHOEI.
The actual headwear comfort is also quite close to the VFX of SHOEI (backward compatible), and it can be inferred that it was probably referred to for Large.
The shape of the head is different here, but there is no pain anywhere in particular, and even if you shake your head violently, there is no gap.
As a disadvantage, there is also a place that reflects the price in a certain way, such as Cheek padetc.
The other thing is that the chin belt is too long and the material itself has no waist and is squishy, so it is a little difficult to remove if you are not used to it.
Even though it has a removable interior, you can't remove the chin belt cover (you have to wash the whole helmet).
However, this is compared to the ARAI and SHOEI, and I thought the quality was good enough compared to other Helmets in a similar price range.
The other thing I noticed is that the air induction at the top of the head doesn't seem to be working very effectively.
It would be better if the interior pad on the reverse side of the air inlet was partially made of mesh, or if a groove was dug in the foam urethane to create an air passage.
I have written some bad points, but I feel that I was able to see the opposite because of the very good Cost performance in terms of price and quality.
Anyway, it is light and comfortable to wear, and I think the appeal of the most Large is that there is no sense of fatigue even if you keep wearing it for a long time.
View detail
Only for KLX250 SDF ReplicaMODEL.
New Modelv1 is really well made. I own more than one, this is only for KLX250 SDF ReplicaMODEL. There are many times when I play a game in between forest road touring, and I feel the best in Camouflage even if I wear Helmet. Light, cool, Fit is also high quality so that it can not be compared with the previous v1. View detail
I bought a refill.
Because this Helmet was doing Sale at 12800 yen of 40% Off in the private import bombing, I used it for more than one year, and took the opportunity that it had become tired, and replaced it. I will use it only for wr250R. View detail
The new v1 has a great Fit feel!
The new v1 is really great, to be honest, the interior of the past v1 did not just fit the Japanese head, so the model change has improved the appearance as well as the performance of the Intake, especially the interior, Matte Black is very useful to match with anything. View detail
Very stylish and massive design.
My father-in-law's Helmet was getting tired, so we ordered it together with the fox v1.revn when we imported it. I bought it in the same size because I usually used xl. My father-in-law said that the size of the helmet is close to the size of the Shoei, and the Cheek pad is a little bit thicker, but the head pad also has a good fit, and he was happy that it is not easy to get tired. View detail
Light weight, reduced neck strain, wide range of sizes
I was looking for an Off-RoadHelmet and came across this one. It's very light and reduces the burden on my neck. I think my head shape is special or it hurts a little when I use other company's size XL, but this product is just fit with XL. I have not tried it yet, but there seems to be XXL, so I have a sense of security about the size. View detail
It's cool and well built even for kids.
I chose the matching v1 for my eldest son to practice Motocross seriously when he became a Small student. It fits well with the ttr-50. We are still practicing the basics such as FlatDirt in 2nd gear, figure 8 on the riverbed, brake lock, and corner rise from brake lock. View detail
Gibson has been modernized.
I was using Gibsonyx3 for commuting until recently. I was wondering if I should buy Repair Parts and still use it or not because the interior and Screen are already tattered, but when I went to visit Nankai Parts, they were selling New Model Gibson at 3 discount, so I tried it on and found that the interior, especially the Cheek pad, is very thick and the face doesn't shift. The yx3 does not have a Sizes setting and the Cheek pad is very loose, so I had to remove the Inner and add Sponge to the HeadLiner to make it fit on my head, so it was easy to shift and I was worried, but this is good! View detail
Design Fit feel etc...I love everything about it.
My OffHelmet that I had been using for nearly 20 years was falling apart, so I bought this product for a fresh start.
I am very happy with the visibility and design etc.
The shape is different from a normal Full faceHelmet due to the off-road type design. The Manufacturer or BELL is another purchase point.
I would recommend this product to anyone who likes a different Helmet from others ^_^^.
View detail
Light(^^)
I held the box when it arrived, and if it was empty? I think that's a bit of an exaggeration (Large?). Light.
It is thought that the shape of the cap was studied on SHOEI, but lightness is the point of the largest.
I'm going to write some details.
? The interior is thin and not very wrapped up
There is a hole for speaker installation, but it is shallow and may hurt some people.
As for ?Ventilation, it doesn't feel like air is flowing, but it's not steaming, so it seems to work reasonably well
Anti-reflective Seat that sticks to the back of Visor is attached, but the performance of the adhesive may be bad or it peels off, the better to prepare the Double-sided Tape or something else.
Well, the Carbon Helmet is at this price, I should be honestly praised that you can get the Helmet of Carbon at this price, because it is light (that's all!)
View detail
It's insanely light.
I was attracted by the ear space of Income and the lightness of Carbon, so I bought it. As Sponge was quite hard, I adjusted Teak with a commercially available Urethane sponge, and then I bought it. I feel secure in the fact that it is certified by SG Standard and MFJ. Because it is made of FRP, it is extremely light. I have a good feeling about this manufacturer. I hope that this manufacturer will continue to produce various products from a different perspective than other manufacturers. View detail
Almost Exactly
If you are a net, the width of the mouth of the cover is narrow, so it is better to buy the one sizeLarge size You said it was good, but for me, with my ARAIL size, it's a little loose in the L size. It was mostly Exactly. The width of the wearer's mouth is definitely narrow. The ear may be painful for some people. If you have a thin face and a long head from the top, I think that you can use the size of the head as it is. It depends on the person, so it is just a reference. View detail
It was a bit of a brave purchase, but my fears were unfounded
I've never been interested in anything other than ARAI, SHOEI, etc., except for Japan, and I'm too anxious to use it I didn't have one, but I was caught by the price and the design and bought it
At first there was some discomfort in the Fit feeling, but it didn't bother me at first
The feeling of holding and wearing is also light, and the shortness of the Visor is also there, when you ride the Speed, it hangs on your neck The burden was also nothing compared to the Helmet of nearly 10 years ago
But for some people, the lightness might be unsettling
View detail
This is a bargain!
The back of the neck of the previous MODEL's Mad Jacket was so scuffed that I had to give up the purchase
I was curious about the Fit feeling of 2
Then, I saw the actual product at the Lyco Land and tried it on
The scuttlebutt that was bothering me has been improved, the interior has evolved, and the Fit feeling is fine
Anyway, it's light, not hard on the neck and really comfortable The actual weight is 1202g as per the Catalogue value
I've done about 40km of real-world driving and the Visor is comfortable and not stirring
The shape of the interior and exterior is well done, perhaps referring to the VFX-W
If you look closely, it's cheesy in some places, but for a few OffTwo or Grass Races a year, this is good enough
And it has SGMark By the way, it is lighter than 1360g of VFX-WR
View detail
Nice Helmet that goes with everything
Solidly Off-Hell is not my favorite, so I chose this one
Off-road, Trucker style or more recently, the Sto. Fire system can handle it, lol
The good thing is that the price is also the price, so you can't spare a scratch on it
Of course you can't compare it to the VFX-WR or anything else in terms of performance, lol
View detail
Yamaha has a good Fit feeling and a good cosmetic feel
Former motorcycle mechanic, has been a motorcycle mechanic for over 20 years, has been and still is, and other companies Manufacturer (A,S,O-K,Noetc.) I also use it for various purposes Our average male height and body type, head size is 56-56.5cm in actual size, always A,S company is always Fit feeling Full face and Jet are both available in M size, and other companies are offering M~L size for casual wear I choose and so on
Mainly high speed use Touring is safe, comfort, with wind cutting sound etc Full face by A,S Company for Income loading reasons, and Motorcycle for short distances Since it is a STREET type motorcycle, it is mainly a jet helmet (in winter It's like (Full face and Chin guard can be removed) But I don't choose STREET type small jet because it has no safety, function and comfort
This YX-6 is not available in many shops, but it's the same one as the DS-X1 from OEM manufacturer H So you can match the size if you have it I had M Size Exactly, but I chose L Size for a short ride But there is no wobble
I have experience with the Yamaha Helmet with my old Gibson and Jet YJ-5III The feeling of having tried on the other MODEL of the present sale is also a particular favorite of the wearing comfort personally. From the A,S company I think that the pad is not hard, and I think it is a fit feeling than the O company Supercool that is sweat-absorbing and quick-drying, and also has a sterilizing effect (R) Interior There is an indentation for speaker installation in the ear
I find unpleasant wind cutting noises and drafts in the Shield especially unpleasant This YX-6 is not to be compared with the A,S company, but it is to be sold immediately It passed, better than the O Company's KaOi II
I'm also concerned about the distortion of the field of view due to the curvature of the shield, which is common in off-vehicle Helmets with shields The curve of Company W's was too tight and affected my vision The design is also sharp and suitable for young users
The color of this Wine Red is also just right between the darker S Company and the lighter O Company
I've been using this YX-6 with the TopVisor off and a STREETFull face Use The field of view is wider than general Full face and is comfortable However, when I remove Visor and use the Screw which was fixed to the empty Screw hole as it is Because the screw is long, it floats Because it sticks out a lot even if I bit the resin Washer, I changed to the short Screw of the other company
Off cars are fewer and fewer now, but the current "NAKED" But wouldn't it look good with the TopVisor off? The visibility is comfortable I think it's pretty good in total terms for this price
Yamaha's Helmet with Inner Visor The MainShield option is [Color] It's only sold in Clear and a good Graphic color with a good Sense that isn't fancy The Chin strap cover, which is most likely to deteriorate under load in sales and general interior design, is also I would buy it more if it could be replaced with a removable one... Y's Gear Please Mr....
View detail
So so
Replacing the SHOEIVFX-DT, which was too raggedy
VFX-DT was M Size, so I bought the same M Size
There is a tendency in the foreign ones, near the temples and behind the top of the head
The shape doesn't fit and it hurts if you wear it for a long time
I'm crushing the interior and dealing with the force (laughs)
If you are interested in it, you can use one Large size
Ventilation is cool and comfortable, but
You can't open and close it, so it's left open, which can be hard in cold weather
The price is the price, so I guess this is what it is
View detail